Double Row Connector 2.54mm Pitch HCTL HC-XG-2*20Y-05 with Durable Materials and Exchangeable Design
Manufacturer:
HCTL
Description:
2.54mm -40℃~+105℃ 3A 2x20P 250V 20 2 2.54mm P=2.54mm Free Hanging, Panel Mount RoHS
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Free Hanging, Panel Mount
Specifications
Row Spacing:
2.54mm
Operating Temperature:
-40℃~+105℃
Color:
黑色
Current Rating:
3A
Number Of Positions Or Pins:
2x20P
Voltage Rating (Max):
250V
Number Of PINs Per Row:
20
Number Of Rows:
2
Pitch:
2.54mm
Mfr. Part #:
HC-XG-2*20Y-05
Package:
P=2.54mm
Model Number:
HC-XG-2*20Y-05
Introduction
Product Overview
This specification covers the 2.54MM PITCH XG CONNECTOR DOUBLE ROW TYPE, including product performance, test methods, and inspection requirements. It is designed for use in various electronic applications, offering reliable connectivity and durability.
Product Attributes
- Brand: HCTLDZ ()
- Origin: Shenzhen, China
- Materials: PBT, Phosphor Bronze, Brass
- Certifications: ROHS, UL94V-O
Technical Specifications
| Item | Requirement | Test Mode |
| 3. Use Condition | ||
| Ambient temperature Range | -40 105 | |
| Applicable Wire Sizes | AWG #2226 | |
| Applicable PC board thickness | 1.6mm | |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust, plating oxidation, peeling. | |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 5. Material | ||
| Terminal Contact | Phosphor bronze, Brass. Thickness 0.22mm / 0.64mm. Partial gold plating: 2m / 3m. ROHS compliant. | |
| Housing Plastic Wafer | PBT UL94V-O. Color: Black / White. | |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | |
| Rated Current | 3A AC/DC | |
| Withstand voltage | No breakdown or flashover. Apply 500V AC(rms) for 1 minute between adjacent contacts. | |
| Contact Resistance | Initial value 20m. Apply a maximum voltage of 20mV and maximum current of 100mA to the Mate connector. Does not include wire resistance. | |
| Insulation Resistance | 1000 M. Apply 500V DC(rms) for 1 minute between adjacent contacts. | |
| 7. Mechanical Performance | ||
| Single contact insertion force | 3.5N | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test. |
| Single contact Withdrawal force | 0.39N | The terminal and the hole seat at a rate per minute to 25 3mm along the write direction are pulled out from the hole in the seat. |
| Terminal crimping Wire strength | AWG#22: 50N, AWG#24: 30N, AWG#26: 20N | Axial pullout force at a rate per minute to 25 3mm. |
| Pin Retention Force | 10N | Exerts a force on the pin end at a rate per minute 253mm until the needle exit. |
| Durability | Contact Resistance 40m. Appearance: No damage. | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute. |
| Vibration | Current Discontinuity: 1 sec Max. Contact Resistance 40m. Appearance: No damage. | Amplitude: 1.5mm p-p. Frequency: 10-55-10 Hz/minute. Duration: 2 hours for each direction (X, Y, Z axis). |
| 8. Endurance Characteristics | ||
| Thermal Aging | Contact Resistance 40m. Appearance: No damage. | Temperature: 852. Period: 96 hours continuously. |
| Temperature Rise | Measure temperature rise of contact when the maximum rated current is passed. | |
| Humidity (Constant Humidity) | Contact Resistance 40m. Insulation Resistance 1000m. Appearance: No damage. | Temperature: 402 C. Relative humidity: 90-95% (RH). Period: 96 hours continuously. |
| Temperature cycling | Contact Resistance 40m. Insulation Resistance 1000m. Withstand voltage: No breakdown or flashover. Appearance: No damage. | One cycle: -403C (30min) -> room temp (10-15min) -> 1053C (30min) -> room temp (10-15min). Total cycles: 5. |
| Salt spray | Contact Resistance 40m. Appearance: No damage. | Temperature: 35 3 C. Concentration: 5 1 %. Period: 24H. |
| Solder ability | Solder area: 90%. | Solder temperature: 2455C. Immersion period: 3 0.5S. |
| Resistance to soldering heat (Wave soldering) | Appearance: No damage. | Soldering temperature: 2605. Soldering time: 50.5S. |
| Resistance to soldering heat (Manual soldering) | Appearance: No damage. | Soldering temperature: 3505. Soldering time: 30.5S. |
2504101957_HCTL-HC-XG-2-20Y-05_C42376621.pdf
Send RFQ
Stock:
MOQ:
