electrical connection HCTL PH-6A strip connector designed for temperature range minus 25 to 85 Celsius
Manufacturer:
HCTL
Description:
Connector Header 6 position 2mm Pitch 2A Through Hole -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Headers, Male Pins
Specifications
Flame Retardant Rating:
UL94V-0
Reference Series:
PH
Pins Structure:
1x6P
Contact Plating:
锡
Contact Material:
黄铜;PA66
Pitch:
2mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
6
Number Of Rows:
1
Row Spacing:
-
Mounting Type:
直插
Operating Temperature:
-25℃~+85℃
Mfr. Part #:
PH-6A
Package:
Through Hole,P=2mm
Model Number:
PH-6A
Introduction
Product Overview
This specification applies to the PH series strip connector, covering product performance, test methods, and inspection requirements. It is designed for electrical connections with specific environmental and mechanical performance standards.
Product Attributes
- Brand: HCTLDZ
- Origin: Shenzhen, China
- Product Name: PH 2.0 Series Connector
- Model Number: HC-PH - ****
- Release Date: 2019/7/25
- Revision: A
Technical Specifications
| Item | Description | Requirement | |
| Scope | Contents of specifications apply to PH series connector strip | Product performance, test methods and inspection requirements | |
| Applicable Standards | GB/T2421, GB/T2423, GB/T2424, GB/T5095 | ||
| Use Condition - Ambient Temperature | -25 +85 | ||
| Use Condition - Applicable Wire Sizes | AWG #2228 | ||
| Material | Terminal Contact | Phosphor bronze, 0.2mm thick, Tin plating: 35m | |
| Housing Plastic | Nylon66 UL94V-0, Color: White | ||
| Wafer | Brass, 0.50mm thick, Tin plating: 2.55m, Color: Beige | ||
| Electrical Performance | Rated Voltage | 250V AC/DC | |
| Rated Current | 2A AC/DC | ||
| Withstand Voltage | 800V AC (rms) for 1 minute between adjacent contacts, leakage current < 0.5mA | No breakdown or flashover | |
| Insulation Resistance | 1000 M | ||
| Mechanical Performance | Single contact insertion force | 6N | Test rate: 253mm/min |
| Single contact Withdrawal force | 0.5N | Test rate: 253mm/min | |
| Terminal crimping Wire strength | AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N | Test rate: 253mm/min | |
| Pin Retention Force | 15N | Test rate: 253mm/min | |
| Seat pull-out force | 15N | Test rate: 253mm/min | |
| Durability | Contact Resistance 30m | 30 cycles, 10 cycles/min max rate | |
| Vibration | Current Discontinuity: 1 sec Max, Contact Resistance 30m | Amplitude: 1.5mm p-p, Frequency: 10-55-10Hz/min, 2 hours per direction (X, Y, Z) | |
| Environmental Performance | Thermal Aging | Contact Resistance 30m, Appearance: No damage | 852, 96 hours |
| Temperature Cycling | Appearance: No damage, No breakdown or flashover | -553 (30min) to 853 (30min), 5 cycles | |
| Constant Humidity | Contact Resistance 30m, Insulation Resistance 500m, Appearance: No damage | 402, 90-95% RH, 96 hours | |
| Salt Spray | Contact Resistance 30m, Appearance: No damage | 353, 51% NaCl solution, 8 hours (pre-plated) or 24 hours (post-stamped) | |
| Soldering Performance | Solder ability | Soldering Area 90% | 2455C, 30.5S (tin pot) |
| Resistance to soldering heat | Appearance: No damage | Hand soldering: 3505C, 30.5S; Wave soldering: 2305C, 50.5S |
2504101957_HCTL-PH-6A_C2908627.pdf
Send RFQ
Stock:
MOQ:
