Connector strip PH 2.0 series HCTL PH-3A designed for electrical and electronic product applications
Manufacturer:
HCTL
Description:
Connector Header 3 position 2mm Pitch 2A Through Hole -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Headers, Male Pins
Specifications
Flame Retardant Rating:
UL94V-0
Pins Structure:
1x3P
Reference Series:
PH
Contact Plating:
锡
Contact Material:
黄铜;PA66
Pitch:
2mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
3
Number Of Rows:
1
Row Spacing:
-
Mounting Type:
直插
Operating Temperature:
-25℃~+85℃
Mfr. Part #:
PH-3A
Package:
Through Hole,P=2mm
Model Number:
PH-3A
Introduction
Product Overview
This specification covers the PH series connector strip, detailing product performance, test methods, and inspection requirements. It is designed for electrical and electronic product applications, suitable for use under specified environmental conditions.
Product Attributes
- Brand: HCTLDZ ()
- Origin: Shenzhen, China
- Product Name: PH 2.0 Series Connector
- Model Series: PH 2.0
- Certifications: UL94V-0 (for Housing Plastic)
Technical Specifications
| Item | Description | Specification |
| Scope | Applicable Standards | GB/T2421, GB/T2423, GB/T2424, GB/T5095 |
| Use Condition (Ambient Temperature) | -25 +85 | |
| Applicable Wire Sizes | AWG #2228 | |
| Material | Terminal Contact | Phosphor bronze, 0.2mm thick, Tin plating: 35m |
| Housing Plastic | Nylon66 UL94V-0, Color: White | |
| Wafer | Brass, 0.50mm thick, Tin plating: 2.55m, Color: Beige | |
| Electrical Performance | Rated Voltage | 250V AC/DC |
| Rated Current | 2A AC/DC | |
| Withstand Voltage | 800V AC (rms) for 1 minute (between adjacent contacts) | |
| Insulation Resistance | 1000 M | |
| Mechanical Performance | Single Contact Insertion Force | 6N |
| Single Contact Withdrawal Force | 0.5N | |
| Terminal Crimping Wire Strength | 15N (AWG #22), 13N (AWG #28) | |
| Pin Retention Force | 50N (AWG #22), 20N (AWG #28) | |
| Durability | 30 cycles, Contact Resistance 30m | |
| Environmental Performance | Thermal Aging | 852, 96 hours, Contact Resistance 30m |
| Temperature Cycling | -553C (30min) to 853C (30min), 5 cycles | |
| Salt Spray | 353C, 51% NaCl solution, 8 hours (after plating) or 24 hours (before plating) | |
| Solder Ability | Soldering temperature: 2455C, Immersion period: 30.5S | |
| Appearance | Product surface without defects, dirt, cracks, or mechanical damage. Contacts without rust, plating oxidation, or peeling. | |
| Exchangeability | Shall be exchangeable with same specification products. |
2504101957_HCTL-PH-3A_C2908624.pdf
Send RFQ
Stock:
MOQ:
