Connector strip HCTL HC-2510-4A featuring nylon66 housing and tin plating for electrical performance
Manufacturer:
HCTL
Description:
Connector Header 4 position 2.54mm Pitch 4A Through Hole -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
5.8mm
Reference Series:
-
Pins Structure:
1x4P
Contact Plating:
锡
Contact Material:
黄铜;PA66
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Supplementary Features:
-
Pitch:
2.54mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
4
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
10.16mm
Z-Height Of The Board:
11.6mm
Row Spacing:
-
Mounting Type:
直插
Mfr. Part #:
HC-2510-4A
Package:
Through Hole,P=2.54mm
Model Number:
HC-2510-4A
Introduction
Product Specification
Product Description: This specification covers the 2510 series connector strip, detailing its performance, test methods, and inspection requirements. Designed for reliable electrical connections, these connectors are suitable for various electronic applications.
Product Attributes
- Brand: (Huatian Tianlu)
- Origin: (Shenzhen Bao'an District)
- Applicable Standards: GB/T2421, GB/T2423, GB/T2424, GB/T5095
- Certifications: UL94V-0 (for Housing)
Technical Specifications
| Item | Description | Material | Finish | Requirement |
|---|---|---|---|---|
| Material | Terminal | Phosphor bronze | Tin Plating: 3~5m | - |
| Wafer | Brass | Tin Plating: 2.5~5m | - | |
| Housing | Plastic Shell | Nylon66 | UL94V-0, Color: White | - |
| Plastic Shell | Nylon66 | UL94V-0, Color: Beige | - | |
| Electrical Performance | ||||
| Current Rated | 4A | - | - | AC/DC |
| Voltage Rated | 250V | - | - | AC/DC |
| Contact Resistance | Initial: 20m | - | - | Max 20mV, Max 100mA applied |
| Withstand Voltage | No breakdown or flashover | - | - | 1000V AC (rms) for 1 min, 0.5mA leakage |
| Insulation Resistance | 1000 M | - | - | 500V DC for 1 min between adjacent contacts |
| Mechanical Performance | ||||
| Terminal crimping wire strength | AWG#24: 30N AWG#26: 20N AWG#28: 13N AWG#30: 8N | - | - | Pullout force at 253mm/min |
| Fixed terminals and hole seat | 15N per contact | - | - | Pullout force at 253mm/min along wire direction |
| Single contact insertion force | 6N | - | - | At 253mm/min |
| Single contact withdrawal force | 0.6N | - | - | At 253mm/min |
| Pin Retention force | 15N per contact | - | - | Pullout force at 253mm/min on pin end |
| Durability | Contact Resistance: 30 m | - | - | 30 cycles (max 10 cycles/min) |
| Vibration | Appearance: No damage Contact Resistance: 30 m Current Discontinuity: 1sec Max | - | - | Frequency: 10-55-10 Hz/min, Amplitude: 1.5mm p-p, 2 hours per axis (X, Y, Z) |
| Environmental Performance | ||||
| Thermal Aging | Appearance: No damage Contact Resistance: 30 m | - | - | 852 for 96 hours |
| Temperature Rise | 30 Max | - | - | At maximum rated current |
| Humidity | Appearance: No damage Contact Resistance: 30m Insulation Resistance: 500M Withstand Voltage: No breakdown or flashover | - | - | 402, 90-95%RH for 96 hours |
| Temperature Cycling | Same as Humidity requirements | - | - | 5 cycles (-553 for 30min, 853 for 30min with room temp. transition) |
| Salt Spray | Appearance: No damage Contact Resistance: 30m | - | - | 51% solution, 353. 8 hours (post-plating), 48 hours (pre-plating) |
| Solder Ability | Soldering Area: 90% | - | - | 2455 for 30.5S |
| Resistance to Soldering Heat | Appearance: No damage | - | - | Manual: 3055 for 30.5S; Wave: 2305 for 50.5S |
Usage Conditions
- Ambient Temperature Range: -25+85
- Applicable Wire Sizes: AWG#24#30
- Applicable PC board thickness: 1.6mm
Packaging, Transportation, Storage
- Packaging: Terminals in tape and reel, housings in plastic bags, overall packaging with certificate including product details. Exterior carton with packing list. Products secured within the box.
- Transportation: Any vehicle suitable, protected from moisture and mechanical damage. Transport temperature: -20~+50.
- Storage: Ambient temperature -10 to +40, Relative humidity 80%. Store in a dry environment free from corrosive gases. Re-qualification test required if stored for over 6 months.
2203111830_HCTL-HC-2510-4A_C2982033.pdf
Send RFQ
Stock:
MOQ:
