connector strip HCTL HC-PH-4AWD-PF-K-10 with rated voltage 250 volts AC DC and rated current 2 amps
Manufacturer:
HCTL
Description:
Connector Header 4 position 2mm Pitch 2A Right Angle -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
6.25mm
Reference Series:
PH
Pins Structure:
1x4P
Contact Plating:
锡
Contact Material:
黄铜;PA66
Operating Temperature:
-25℃~+85℃
Supplementary Features:
打K脚
Pitch:
2mm
Voltage Rating (Max):
100V
Number Of PINs Per Row:
4
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
9.9mm
Z-Height Of The Board:
4.9mm
Row Spacing:
-
Mounting Type:
弯插
Mfr. Part #:
HC-PH-4AWD-PF-K-10
Package:
Through Hole,Right Angle,P=2mm
Model Number:
HC-PH-4AWD-PF-K-10
Introduction
Product Overview
This specification covers the PH series connector strip, including product performance, test methods, and inspection requirements. Designed for electrical and electronic products, it is suitable for use within an ambient temperature range of -25 to +85 and accommodates wire sizes from AWG #22 to #28, with a PC board thickness of 1.6mm. The connectors are designed for interchangeability with products of the same specification.
Product Attributes
- Brand: HCTLDZ
- Origin: Shenzhen, China
- Certifications: UL94V-O
Technical Specifications
| Item | Specification | Requirement |
| Material | Terminal Contact (PT) | Phosphor bronze, 0.2mm thick, Tin plating: 3~5m |
| Housing Plastic (P) | Nylon66 UL94V-0, Color: White | |
| Wafer | Nylon66/LCP UL94V-0, Color: Beige | |
| Contact (Pin) | Brass, 0.50mm thick, Tin plating: 2.5~5m | |
| Material | ROHS Material | |
| Electrical Performance | Rated Voltage | 250V AC/DC |
| Rated Current | 2A AC/DC | |
| Contact Resistance | Initial value 20 | |
| Mechanical Performance | Single contact insertion force | Less than 6N (6N) |
| Single contact Withdrawal force | More than 0.5N (0.5N) | |
| Terminal crimping Wire strength | AWG#22: 15N, AWG#24: 13N, AWG#26: 10N, AWG#28: 8N | |
| Pin Retention Force | More than 15N (15N) | |
| Vibration | Amplitude: 1.5mm p-p, Frequency: 10-55-10Hz/minute, Period: 2 hours for each direction. Current Discontinuity: Max 1 sec, Contact Resistance: 30m | |
| Environmental Performance | Thermal Aging | Temperature: 852, Period: 96 hours. Appearance: No damage, Contact Resistance: 30m |
| Temperature Cycling | -553C (30min) to 853C (30min), 5 cycles. Appearance: No damage, Contact Resistance: 30m , Insulation Resistance: 500m | |
| Salt Spray | Temperature: 353 C, Concentration: 51% NaCl Solution, Period: 8 hours (after plating) or 24 hours (before plating). Appearance: No damage, Contact Resistance: 30m | |
| Soldering Performance | Solder ability | Solder temperature: 2455C, Immersion period: 30.5S |
| Resistance to soldering heat | Manual: Soldering time: 30.5S, Soldering temperature: 3505. Wave: Soldering time: 50.5S, Soldering temperature: 2605. |
2312201709_HCTL-HC-PH-4AWD-PF-K-10_C19723646.pdf
Send RFQ
Stock:
MOQ:
