Electrical connector HCTL PH-4A compliant with multiple GB T standards ensuring durability and reliability
Manufacturer:
HCTL
Description:
Connector Header 4 position 2mm Pitch 2A Through Hole -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Headers, Male Pins
Specifications
Flame Retardant Rating:
UL94V-0
Reference Series:
PH
Pins Structure:
1x4P
Contact Plating:
锡
Contact Material:
黄铜;PA66
Pitch:
2mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
4
Number Of Rows:
1
Row Spacing:
-
Mounting Type:
直插
Operating Temperature:
-25℃~+85℃
Mfr. Part #:
PH-4A
Package:
Through Hole,P=2mm
Model Number:
PH-4A
Introduction
Product Specification for Approval
This specification document outlines the requirements for the PH 2.0 series connectors. It covers product performance, test methods, and inspection requirements.
Product Attributes
- Brand: HCTLDZ ()
- Product Name: PH 2.0 Series Connector
- Origin: Shenzhen, China
- Color: White (Housing), Beige (Housing)
- Certifications: UL94V-0 (Nylon66/LCP)
Technical Specifications
| Item | Specification | Requirement | Test Method |
| 1. Scope | |||
| Product Performance, Test Methods, and Inspection Requirements | Applicable to PH series strip connectors | ||
| 2. Applicable Standards | |||
| GB/T2421, GB/T2423, GB/T2424, GB/T5095 | Environmental Testing Methods for Electrical Connectors and Components | ||
| 3. Use Condition | |||
| Ambient Temperature Range | -25 +85 | ||
| Applicable Wire Sizes | AWG #2228 | ||
| Applicable PC board thickness | 1.6mm | ||
| 4. Appearance and Dimension | |||
| Appearance | Product surface without defects, dirt, cracks, or mechanical damage; contact parts without rust, plating oxidation, or peeling. | ||
| Dimension | According to drawings | ||
| Interchangeability | Exchangeable with same specification products. | ||
| 5. Material | |||
| Terminal Contact | Phosphor bronze, 0.2mm thick, Tin plating: 35m | ||
| Housing Plastic | Nylon66 UL94V-0, Color: White | ||
| Housing Plastic | Nylon66/LCP UL94V-0, Color: Beige | ||
| Contact Pin | Brass, 0.50mm thick, Tin plating: 2.55m | ||
| 6. Electrical Performance | |||
| Rated Voltage | 250V AC/DC | ||
| Rated Current | 2A | ||
| Contact Resistance | 20m (Initial value) | Apply 20mV max voltage and 100mA max current to mate connectors. Does not include wire resistance. | |
| Insulation Resistance | 1000 M | Apply 500V DC for 1 minute between adjacent contacts. | |
| Withstand Voltage | 800V AC (rms) for 1 minute between adjacent terminals and ground. Leakage current < 0.5mA. | No breakdown or flashover. | |
| 7. Mechanical Performance | |||
| Single Contact Insertion Force | 6N | Mate connectors with terminals and housing at 253mm/min. | |
| Single Contact Withdrawal Force | 0.5N | Pull terminal from housing in wire direction at 253mm/min. | |
| Terminal and Hole Seat Fixing Force | 15N | Mate connectors with terminals and housing at 253mm/min. | |
| Terminal Crimping Wire Strength | 13N (AWG#28) to 50N (AWG#22) | Axial pullout force on crimped wire at 253mm/min. | |
| Pin Retention Force | 15N (Per contact) | Exerts force on pin end at 253mm/min until needle exits seat. | |
| Seat Pull-out Force | 15N (Per contact) | Mate connectors with terminals and housing at 253mm/min. | |
| Durability | Contact Resistance 30m | Mate connectors 30 cycles (10 cycles/min) before environmental test. | |
| Vibration | Current Discontinuity: Max 1 sec. Contact Resistance 30m. Appearance: No damage. | Amplitude: 1.5mm p-p. Frequency: 10-55-10Hz/min. Directions: X, Y, Z axes. Period: 2 hours per direction. | |
| 8. Environmental Performance | |||
| Thermal Aging | Appearance: No damage. Contact Resistance 30m. | Temperature: 852. Period: 96 hours continuously. | |
| Temperature Rise | Measure temperature rise of contact when maximum rated current is passed. | ||
| Constant Humidity | Appearance: No damage. Contact Resistance 30m. Insulation Resistance 500m. | Temperature: 402. Relative Humidity: 90-95% RH. Period: 96 hours continuously. | |
| Temperature Cycling | Appearance: No damage. No breakdown or flashover. | -553 (30min) to 853 (30min), with 10-15min transition. 5 cycles. | |
| Salt Spray | Appearance: No damage. Contact Resistance 30m. Solder Area: 90%. | Temperature: 353. Concentration: 51% NaCl solution. Period: 8 hours (post-plating) or 24 hours (pre-plating). | |
| Solder Ability | Area of soldering: 90% | Solder temperature: 2455C. Immersion period: 30.5S. | |
| Resistance to Soldering Heat | Appearance: No damage. | Manual soldering: 3505C, 30.5S. Wave soldering: 2305C, 50.5S. Position: 1.5mm from conductor/fixing piece. | |
| 9. Packaging, Transport, Storage | |||
| Transport | Avoid direct rain/snow and sun exposure. | Temperature: -20 to +50. Any transport method allowed. | |
2504101957_HCTL-PH-4A_C2908625.pdf
Send RFQ
Stock:
MOQ:
