Electrical Connector Double Row 2.00mm Pitch HCTL HC-PHB-2*14Y-05 Ideal for Electronic and Electrical
Manufacturer:
HCTL
Description:
Connector Housing 28 Position 2mm Pitch Dual Row PA66 -25℃~+85℃
Category:
Arrays, Edge Type, Mezzanine (Board to Board)/Rectangular Connector Housings
Specifications
Flame Retardant Rating:
-
Pitch:
2mm
Colour:
白色
Number Of Rows:
2
With Wings:
不带翅
Reference Series:
-
Operating Temperature:
-25℃~+85℃
Plastic Material:
PA66
Number Of PINs Per Row:
14
Number Of Positions Or Pins:
2x14P
With Locker:
带锁扣
Row Spacing:
2mm
Mfr. Part #:
HC-PHB-2*14Y-05
Package:
P=2mm
Model Number:
HC-PHB-2*14Y-05
Introduction
Product Overview
This specification outlines the requirements for the 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE. It covers product performance, test methods, and inspection requirements for this series of connectors, designed for electrical and electronic applications.
Product Attributes
- Brand: HCTLDZ ()
- Origin: Shenzhen, China
- Certifications: UL94V-O (for Housing Plastic)
- Color: Nature (for Housing Plastic and Contact)
Technical Specifications
| Item | Requirement | Test Mode |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling. | General Principles |
| Dimension | According to drawings | General Principles |
| Exchangeable | Exchangeable with same specification products. | General Principles |
| 3. Use Condition | ||
| Ambient temperature | -25 +85 | General Principles |
| Applicable Wire Sizes | AWG #2228 | General Principles |
| Applicable PC board thickness | 1.6mm | General Principles |
| 5. Material | ||
| Terminal Contact | Brass, Thickness: 0.50mm, Tin plating: 2.55 m | Material |
| Housing Plastic | Nylon66, UL94V-O, Color: Nature | Material |
| Contact | Phosphor bronze, Thickness: 0.2mm, Tin plating: 35 m | Material |
| Plastic Wafer | Nylon66, UL94V-O, Color: Nature | Material |
| Contact | Brass, Thickness: 0.50mm, Tin plating: 2.55 m | Material |
| Plastic Wafer | LCP, UL94V-0, Color: Nature | Material |
| Contact | Brass, Tin plating: 2.55 m | Material |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC/DC | Test Mode |
| Rated Current | 2A AC/DC | Test Mode |
| Withstand voltage | No breakdown or flashover | Apply 500V DC(rms) for 1 minute between adjacent contacts |
| Contact Resistance | Initial value 20m | Apply a maximum voltage of 20mV and maximum current of 100mA to the mate connector |
| Insulation Resistance | 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance |
| 7. Mechanical Performance | ||
| Terminal crimping Wire strength | AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N | Axial pullout force per contact at 25 3mm/min |
| Fixed terminals And hole seat | 12N | Pullout force of terminal from hole seat at 25 3mm/min |
| Single contact insertion force | 5N | Inserting force test at 25 3mm/min |
| Seat pull-out force | 15N | Withdrawal force at the pin end at 25 3mm/min until the needle exits the seat |
| Pin Retention Force | 0.3N | Per contact |
| Durability | Contact Resistance 40m, Appearance: No damage | Mate connectors up 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test |
| Vibration | Current Interruption: 1 sec Max, Contact Resistance 40m, Appearance: No damage | Amplitude: 1.5mm p-p, Frequency: 10-55-10Hz/minute, Duration: 2 hours for each direction (X, Y, Z axes) |
| 8. Endurance Characteristics | ||
| Thermal Aging | Contact Resistance 40m, Appearance: No damage | Temperature: 852, Period: 96 hours continuously |
| Temperature Rise | Measure the temperature rise of contact when the maximum rated current is passed | Mate connector measure the temperature rise of contact when the maximum rated current is passed |
| Humidity | Contact Resistance 40m, Insulation Resistance 1000m, Appearance: No damage | Temperature: 402 C, Relative humidity: 90-95% (RH), Period: 96 hours continuously |
| Thermal Shock | Contact Resistance 40m, Insulation Resistance 1000m, Withstand voltage: No breakdown or flashover, Appearance: No damage | Cycle: -553C (30min) -> 10-15min room temp -> 853C (30min) -> 10-15min room temp. Total cycle: 5 cycles |
| Salt Spray | Contact Resistance 40m, Appearance: No damage | Temperature: 353 C, Concentration: 51% (NaCl solution), Period: Stamping before tin plated for 24 hours or Stamping after tin plated for 8 hours |
| Solder ability | Soldering area: 90 % | Solder temperature: 2455C, Immersion period: 3 0.5S |
| Resistance to soldering heat | Appearance: No damage | Manual Soldering: Soldering temperature: 350 5 , Soldering time: 3 0.5S. Wave Soldering: Soldering temperature: 260 5 C, Soldering time: 5 0.5S |
2310171743_HCTL-HC-PHB-2-14Y-05_C18548012.pdf
Related Products
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
| Image | Part # | Description | |
|---|---|---|---|
|
|
Connector HC-1.0-9Y with 8 millimeter A and 12 millimeter B dimensions manufactured from NY material |
Connector Housing 9 Position 1mm Pitch Single Row SH Series PBT -25℃~+85℃
|
|
|
|
HC-XA-5Y component offering 10 millimeter dimension designed for precision and long-lasting industrial |
Connector Housing 5 Position 2.5mm Pitch Single Row XA Series PA66 -25℃~+85℃
|
|
|
|
5.08mm Pitch Double Row Connector Suitable for AWG 14 to 24 PC Board Thickness 16mm HCTL HC 508D 3Y 05 |
Connector Housing 3 Position 5.08mm Pitch Single Row PBT -25℃~+85℃
|
Send RFQ
Stock:
MOQ:
