Push pull locking mechanism connectors HRS RP17A 13P 12PC 71 with anti static electricity protection
Manufacturer:
HRS
Description:
Circular Connector Housings RoHS
Category:
Backshells and Cable Clamps/Circular Connector Housings
Specifications
Mfr. Part #:
RP17A-13P-12PC(71)
Model Number:
RP17A-13P-12PC(71)
Introduction
RP17 Series Small-sized, Plastic Type, Push-Pull Lock Connectors
The RP17 Series connectors are small-sized, plastic type, push-pull lock connectors designed for secure mating and easy unmating. They feature a white index marking on the plug for easy alignment and a proprietary guide key for blind mating. The robust design utilizes a glass-reinforced polycarbonate resin for a lightweight yet durable connector. An anti-static electricity type is available with metal plates in the receptacle to protect signal lines.
Features
- Superior mating operability with push-pull locking mechanism.
- White index markings for easy mating alignment.
- Proprietary guide key for easy blind mating.
- Lightweight and robust design with glass-reinforced polycarbonate resin shell.
- Anti-static electricity type available for signal line protection.
Product Specifications
| Item | Specifications | Conditions |
| Rated current | 2 A (for contact numbers 1, 3 to 10, using wire of at least 26 AWG) | |
| Rated current | 5 A (for contact numbers 2, 11, 12, using wire of at least 22 AWG) | |
| Operating temperature range | 10 to 60 | |
| Rated voltage | AC100V, DC140V | |
| Storage temperature range | 10 to 60 | |
| Contact resistance | 15m max. (DIP Type: 20m max.) | Measured at DC 1A |
| Insulation resistance | 1,000M min. | Measured at DC 500V |
| Withstanding voltage | No flashover or dielectric breakdown. | AC 1000V for 1 minute |
| Vibration resistance | No electrical discontinuity for 10s or greater. | 10 to 55Hz/cycle, amplitude: 0.75mm, 3 axis directions, 2 hours each direction |
| Shock resistance | No electrical discontinuity for 10s or greater. | Acceleration: 490m/s, duration: 11ms, 3 axis directions, 3 times each direction |
| Mating cycles | Contact resistance: 20m max. (Dip type: 25m max.) | 1,000 times |
| Temperature cycle | Insulation resistance: 1,000M min. | 55 (30 min) Normal temperature (10-15 min) 85 (30 min) Normal temp (10-15 min), 5 cycles |
| Moisture resistance | Insulation resistance: 10M min. (at high humidities), 100M min. (when dry) | Temperature: 40, relative humidity: 90-95%, 96 hours |
Materials / Finish
| Item | Material | Finish | Remarks |
| Plug Shell, insulator | Polycarbonate resin | UL94V-0 | |
| Clamp | Brass | ||
| Bushing | Vinyl chloride resin | ||
| Receptacle Shell, insulator | Poly carbonate resin | UL94V-0 | |
| Steel | Nickel plating | ||
| Female contact | Phosphor bronze | Silver plating | |
| Crimped female contact | Phosphor bronze | Silver plating | |
| Crimped male contact | Phosphor bronze | Silver plating |
Product Number Structure
Plug
| Component | Description |
| Model name | RP17 Series |
| Type identification | No marking: Standard type, A: Anti-static electricity type |
| Shell size | Outer diameter of the mating interface of the plug. |
| Shell type | P: Straight plug, R: Receptacle, J: Jack |
| Shell variation | A, B, or C for variations in the same form. |
| Number of contacts | |
| Contact form | S: Female contact, P: Male contact |
| Contact termination method | C: Crimping, D: Straight PCB dipping |
| Other specifications | Two-digit character for additional specifications. |
Crimp contact
| Component | Description |
| Model name | RP17 |
| Contact type | SC: Crimped female contact, PC: Crimped male contact |
| 10 Contact form | 1: Loose piece contacts, 2: Reel contacts |
| 11 Applicable wire gauge | 1: 18 to 22 AWG, 2: 24 to 30 AWG |
| 12 Type of plating | 2: Silver plating |
Applicable Tools
| Type | Items | Part No. | HRS No. | Applicable contact | Applicable wire size |
| Manual crimping tools | RP17-TC-11 | 150-0043-8 | RP17-PC SC-112 | 18 to 22 AWG | |
| RP17-TC-12 | 150-0044-0 | RP17-PC SC-122 | 24 to 30 AWG | ||
| Automatic crimping press | CM-105C | 901-0001-0 | |||
| Applicator | AP105-RP17-1 | 901-2036-9 | RP17-PC SC-212 | 18 to 22 AWG | |
| AP105-RP17-2 | 901-2026-5 | RP17-PC SC-222 | 24 to 30 AWG | ||
| Cable crimping tool | RP17-TC-01 | 150-0042-5 | |||
| Extraction tool | RP6-SC-TP | 150-0039-0 |
2411220643_HRS-RP17A-13P-12PC-71_C4432304.pdf
Send RFQ
Stock:
MOQ:
