HRS TF31-24S-0.5SH800 connector featuring mechanical and electrical testing for FPC FFC connectivity
Manufacturer:
HRS
Description:
FFC/FPC Connector 24 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -40℃~+85℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-40℃~+85℃
Number Of Contacts:
24P
Pitch:
0.5mm
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
金
Contact Material:
磷青铜
Mfr. Part #:
TF31-24S-0.5SH(800)
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
TF31-24S-0.5SH(800)
Introduction
Product Overview
This product specification sheet details the technical requirements and performance characteristics for a connector designed for FPC/FFC (Type A: t=0.30.03mm, Type B: t=0.30.05mm) applications. It outlines electrical, mechanical, and environmental testing criteria to ensure reliability and performance.
Product Attributes
- Brand: HIROSE KOREA CO.,LTD.
- Applicable Standard: JEIDA-38, MIL-STD-202, JIS C 5402
- Origin: Korea
Technical Specifications
| Item | Test Method | Requirements | Applicable |
| OPERATING TEMPERATURE RANGE | -40 ~ +105 (note1) | ||
| STORAGE TEMPERATURE RANGE | -10 ~ +50(Packed Condition) | ||
| VOLTAGE | 50V [AC(rms) / DC] | ||
| CURRENT | 0.5A [AC(rms) / DC] (note2) | ||
| OPERATING OR STORAGE HUMIDITY RANGE | RELATIVE HUMIDITY 90% MAX (NOT DEWED) | ||
| CONSTRUCTION | GENERAL EXAMINATION VISUALLY AND BY MEASURING INSTRUMENT ACCORDING TO DRAWING | MARKING CONFIRMED VISUALLY | |
| CONTACT RESISTANCE | MATE APPLICABLE FPC/FFC AND APPLY A CURRENT OF 1mA INCLUDING FPC/FFC BULK RESISTANCE(L=8mm) | 50 m MAX. AC 20mV MAX, | O O |
| VOLTAGE PROOF | MATE APPLICABLE FPC/FFC AND APPLY A VOLTAGE OF AC 150V FOR 1 min. | NO BREAKDOWN. | O O |
| INSULATION RESISTANCE | MATE APPLICABLE FPC/FFC AND APPLY A VOLTAGE OF DC 100V | 500 M MIN. | O O |
| FPC RETENSION FORCE | MEASURE BY APPLICABLE FPC/FFC(t=0.3) | HORIZONTAL DIRECTION : 0.4N*n min. VERTICAL DIRECTION : 0.3N*n min. (n = Number of Contacts)(note 3) | O - IN 3 DIRECTIONS. |
| DAMP HEAT(STEADY STATE) | EXPOSED AT 402, 90~95 %, 96Hr. | CONTACT RESISTANCE: 50 m MAX. | O - O - |
| SHOCK | DIRECTION OF PULSE 981m/s2 6ms AT 3 TIMES | NO ELECTRICAL DISCONTINUITY OF 1. CONTACT RESISTANCE : 50m MAX NO DAMAGE,CRACK AND LOOSENESS OF PARTS | O - O - |
| RAPID CHANGE OF TEMPERATURE | TEMPERATURE:-40215~35+105215~35 TIME : 30 2~3 30 2~3 min. UNDER 5 CYCLES. | CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 50M MIN. NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | O - |
| DRY HEAT | EXPOSED AT 1052, 96Hr | CONTACT RESISTANCE : 50m MAX NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | O - |
| COLD | EXPOSED AT -402, 96Hr | NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | O - |
| DAMP HEAT, CYCLE | TEMPERATURE -10+65 10 CYCLE(240Hr) | INSULATION RESISTANCE: 50M MIN. NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | O - |
| HYDROGEN SULPHIDE | EXPOSED IN 3 PPM FOR 96Hr. (TEST STANDARD : JEIDA-38) | NO EVIDENCE OF CORROSION WHICH AFFECTS TO OPERATION OF CONNECTOR. | O - |
| CORROSION SALT SPRAY | EXPOSED AT 352, 51% SALT WATER SPRAY FOR 48Hr | CONTACT RESISTANCE 50m MAX NO DAMAGE, CRACK OR LOOSENESS OF PARTS. | O - |
| RESISTANCE TO SOLDERING HEAT | 1) REFLOW SOLDERING: PEAK TMP. : 250 MAX. TMP. 230 MIN FOR 60s 2) SOLDERING IRONS TMP. : 35010 FOR 51s THE SURFACE BEING IMMERSED. | NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS. NO DAMAGE OF ELECTRICAL PERFORMANCE | O - |
| SOLDER ABILITY | SOLDER DIPPING TEMPERATURE 2455 FOR IMMERSION DURATION, 30.3 sec. (TEST STANDARD : MIL-STD-202) | A NEW UNIFORM COATING OF SOLDER SHALL COVER A MINIMUM OF 95% OF THE SURFACE BEING IMMERSED. | O - |
| MECHANICAL OPERATION | 20 TIMES INSERTIONS AND EXTRATIONS |
2410291517_HRS-TF31-24S-0-5SH-800_C3169854.pdf
Send RFQ
Stock:
MOQ:
