connector HRS FH52E-40S-0.5SH 99 suitable for applications requiring high durability and performance
Manufacturer:
HRS
Description:
FFC/FPC Connector 40 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -40℃~+105℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+105℃
Locking Feature:
翻盖式
Number Of Contacts:
40P
Pitch:
0.5mm
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
金
Contact Material:
磷青铜
Mfr. Part #:
FH52E-40S-0.5SH(99)
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
FH52E-40S-0.5SH(99)
Introduction
Product Overview
This product is a connector designed for applications requiring reliable electrical connections. It offers a wide operating temperature range and is suitable for various environmental conditions. The product is tested to meet stringent electrical, mechanical, and environmental standards, ensuring high performance and durability.
Product Attributes
- Brand: HIROSE ELECTRIC CO., LTD.
- Part Number: FH52E-**S-0.5SH(99)
- Code No.: CL580
- Drawing No.: ELC-347552-99-00
- Applicable Cable: t=0.30.05mm, Gold Plating
- Note 1: When the same value of current are applied to all contacts at the same time in once, set the current to the 70 % of the rated current value.
- Revision Date: 16.04.21 (Checked/Designed), 16.02.22 (Drawn)
- Copyright: 2024 HIROSE ELECTRIC CO., LTD.
Technical Specifications
| Item | Test Method | Requirements | QT | AT |
| APPLICABLE STANDARD OPERATING TEMPERATURE RANGE | -40 C TO 105 C | |||
| STORAGE TEMPERATURE RANGE (PACKED CONDITION) | -10 C TO 50 C | |||
| RATING VOLTAGE | 50 V AC / DC | |||
| OPERATING OR STORAGE HUMIDITY RANGE | RELATIVE HUMIDITY | 90 % MAX (NOT DEWED) | ||
| CURRENT | 0.5 A | |||
| CONSTRUCTION GENERAL EXAMINATION | VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING. | |||
| MARKING | CONFIRMED VISUALLY. | |||
| CONTACT RESISTANCE | 1mA(DC OR 1000Hz). BULK RESISTANCE (L=8mm) | 50 m MAX. INCLUDING FPC,FFC | ||
| INSULATION RESISTANCE | 100 V DC. | 500 M MIN. | ||
| VOLTAGE PROOF | 150 V AC FOR 1 min. | NO FLASHOVER OR BREAKDOWN. | ||
| MECHANICAL OPERATION | 20 TIMES INSERTIONS AND EXTRACTIONS. | CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| VIBRATION | FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE 0.75 mm, FOR 10 CYCLES IN 3 AXIAL DIRECTIONS. | NO ELECTRICAL DISCONTINUITY OF 1 s. CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| SHOCK | 981 m/s2 , DURATION OF PULSE 6 ms AT 3 TIMES IN 3 BOTH AXIAL DIRECTIONS. | |||
| FPC RETENTION FORCE | MEASURED BY APPLICABLE FPC. (CONNECTOR,FPC AT INITIAL CONDITION. THICKNESS OF FPC SHALL BE t=0.30mm ) DIRECTION OF INSERTION: | 0.4n N MIN ( n : NUMBER OF CONTACTS). | ||
| RAPID CHANGE OF TEMPERATURE | TEMPERATURE-40+15TO+35+105+15TO+35C TIME 30 2 TO 3 30 2 TO 3 min. UNDER 5 CYCLES. | CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 50 M MIN. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| DAMP HEAT (STEADY STATE) | EXPOSED AT 402 C, RELATIVE HUMIDITY 90 TO 95 %, 96 h. | |||
| DAMP HEAT, CYCLIC | EXPOSED AT -10 TO +65 C, RELATIVE HUMIDITY 90 TO 96 %, 10 CYCLES,TOTAL 240 h. | CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 1 M MIN. (AT HIGH HUMIDITY) INSULATION RESISTANCE: 50 M MIN. (AT DRY) NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| DRY HEAT | EXPOSED AT 1052 C, 96 h. | CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| COLD | EXPOSED AT -403C, 96 h. | |||
| CORROSION SALT MIST | EXPOSED AT 352 C 5% SALT WATER SPRAY FOR 96 h. | CONTACT RESISTANCE: 50 m MAX. NO EVIDENCE OF CORROSION WHICH AFFECTS TO OPERATION OF CONNECTOR. | ||
| SULPHUR DIOXIDE [JIS C 60068-2-42] | EXPOSED AT 402 C , RELATIVE HUMIDITY 805% , 255 ppm FOR 96 h. | |||
| HYDROGEN SULPHIDE [JIS C 60068-2-43] | EXPOSED AT 402 C , RELATIVE HUMIDITY 805% , 10 TO 15 ppm FOR 96 h. | |||
| RESISTANCE TO SOLDERING HEAT | 1) REFLOW SOLDERING (TO BE 2 TIMES MAX.) PEAK TMP. 250 C MAX REFLOW TMP. OVER 230 C WITHIN 60 sec. PRE-HEATING. 150 TO 200C 90 TO 120 sec. 2)SOLDERING IRONS : 350 10 C, FOR 5 1 sec . | NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS. | ||
| SOLDERABILITY | SOLDERED AT SOLDER TEMPERATURE, 2453 C FOR IMMERSION DURATION, 30.3 sec. | A NEW UNIFORM COATING OF SOLDER SHALL COVER A MINIMUM OF 95 % OF THE SURFACE BEING IMMERSED. |
2411011120_HRS-FH52E-40S-0-5SH-99_C6555551.pdf
Send RFQ
Stock:
MOQ:
