Electronic connector HRS FH40-20S-0.5SV with tested assurance and wide operating temperature range
Manufacturer:
HRS
Description:
FFC/FPC Connector 20 Position 0.5mm Pitch Single-side Contact/Vertical Surface Mount -40℃~+105℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Locking Feature:
翻盖式
Operating Temperature:
-40℃~+105℃
Number Of Contacts:
20P
Pitch:
0.5mm
Contact Type:
单侧触点/垂直
Mounting Type:
立贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
金
Contact Material:
磷青铜
Mfr. Part #:
FH40-20S-0.5SV
Package:
Through Hole,P=0.5mm
Model Number:
FH40-20S-0.5SV
Introduction
Product Overview
This product is a connector designed for various electronic applications. It offers a reliable connection with specified electrical and mechanical characteristics, suitable for operating in a wide temperature range and under humid conditions. It is designed for use with specific cable types and meets stringent testing requirements for quality assurance.
Product Attributes
- Brand: HIROSE ELECTRIC CO., LTD.
- Part Number: FH40-**S-0.5SV
- Code Number: CL580
- Drawing Number: ELC4-159298-00
- Revision Date: Aug.1.2024
- Applicable Cable: t=0.30.05mm, GOLD PLATING
- Note: Unless otherwise specified, refer to IEC 60512.
- Note: When the same value of current are applied to all contacts at the same time in once, set the current to the 70 % of the rated current value.
- Remark: In case of consideration for using Automotive equipment / device which demand high reliability, kindly contact our sales window correspondents.
Technical Specifications
| Item | Test Method | Requirements | QT | AT |
| APPLICABLE STANDARD OPERATING TEMPERATURE RANGE | -40 C TO 105 C | |||
| STORAGE TEMPERATURE RANGE | -10 C TO 50 C (PACKED CONDITION) | |||
| RATING VOLTAGE | 50 V AC / DC | |||
| OPERATING OR STORAGE HUMIDITY RANGE | RELATIVE HUMIDITY | 90 % MAX (NOT DEWED) | ||
| CURRENT | 0.5 A | |||
| CONSTRUCTION GENERAL EXAMINATION | VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING. | |||
| MARKING | CONFIRMED VISUALLY. | |||
| ELECTRICAL CHARACTERISTICS CONTACT RESISTANCE | AC 20 mV MAX ( 1 KHz ) , 1 mA . | 50 m MAX. INCLUDING FPC,FFC BULK RESISTANCE (L=8mm) | ||
| INSULATION RESISTANCE | 100 V DC. | 500 M MIN. | ||
| VOLTAGE PROOF | 150 V AC FOR 1 min. | NO FLASHOVER OR BREAKDOWN. | ||
| MECHANICAL CHARACTERISTICS MECHANICAL OPERATION | 20 TIMES INSERTIONS AND EXTRACTIONS. | CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| VIBRATION | FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE 0.75 mm, m/s2 FOR 10 CYCLES IN 3 AXIAL DIRECTIONS. | NO ELECTRICAL DISCONTINUITY OF 1 s. CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| SHOCK | 981 m/s2 , DURATION OF PULSE 6 ms AT 3 TIMES IN 3 BOTH AXIAL DIRECTIONS. | |||
| FPC RETENTION FORCE | MEASURED BY APPLICABLE FPC. (THICKNESS OF FPC SHALL BE t=0.30mm AT INITIAL CONDITION.) | DIRECTION OF INSERTION: 0.3Nn MIN. VERTICAL DIRECTION TO INSERTION: 0.2Nn MIN. (n:NUMBER OF CONTACTS) | ||
| ENVIRONMENTAL CHARACTERISTICS RAPID CHANGE OF TEMPERATURE | TEMPERATURE-40+15TO+35+105+15TO+35C TIME 30 2 TO 3 30 2 TO 3 min UNDER 5 CYCLES. | CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 50 M MIN. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| DAMP HEAT (STEADY STATE) | EXPOSED AT 402C, RELATIVE HUMIDITY 90 TO 95 %, 96 h. | |||
| DAMP HEAT, CYCLIC | EXPOSED AT -10 TO +65 C, RELATIVE HUMIDITY 90 TO 96 %, 10 CYCLES,TOTAL 240 h. | CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 1 M MIN. (AT HIGH HUMIDITY) INSULATION RESISTANCE: 50 M MIN. (AT DRY) NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| DRY HEAT | EXPOSED AT 1052 C, 96 h. | CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| COLD | EXPOSED AT -403C, 96 h. | |||
| CORROSION SALT MIST | EXPOSED AT 352C , 5 % SALT WATER SPRAY FOR 96 h. | CONTACT RESISTANCE: 50 m MAX. NO EVIDENCE OF CORROSION WHICH AFFECTS TO OPERATION OF CONNECTOR. | ||
| SULPHUR DIOXIDE [JIS C 60068-2-42] | EXPOSED AT 402 C , RELATIVE HUMIDITY 805% ,255 ppm FOR 96 h. | |||
| HYDROGEN SULPHIDE [JIS C 60068-2-43] | EXPOSED AT 402 C , RELATIVE HUMIDITY 805% ,10 TO 15 ppm FOR 96 h. | |||
| RESISTANCE TO SOLDERING HEAT | 1) REFLOW SOLDERING PEAK TMP. 250 C MAX . REFLOW TMP. OVER 230 C WHITIN 60 sec. 2) SOLDERING IRONS : TMP. 3505C FOR 51 sec . | NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS. | ||
| SOLDERABILITY | SOLDERED AT SOLDER TEMPERATURE, 2455 C FOR IMMERSION DURATION, 20.5 sec. | A NEW UNIFORM COATING OF SOLDER SHALL COVER A MINIMUM OF 95 % OF THE SURFACE BEING IMMERSED. |
2410121918_HRS-FH40-20S-0-5SV_C3168672.pdf
Send RFQ
Stock:
MOQ:
