connector HRS FH52-32S-0.5SH suitable for electrical connections in varied temperature environments
Manufacturer:
HRS
Description:
FFC/FPC Connector 32 Position 0.5mm Pitch Bottom Contact Surface Mount, Right Angle -40℃~+105℃
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Assemblies
Specifications
Operating Temperature:
-40℃~+105℃
Locking Feature:
翻盖式
Number Of Contacts:
32P
Pitch:
0.5mm
Contact Type:
下接
Mounting Type:
卧贴
FFC, FCB Thickness:
0.3mm
Contact Plating:
金
Contact Material:
磷青铜
Mfr. Part #:
FH52-32S-0.5SH
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
FH52-32S-0.5SH
Introduction
Product Overview
This product is a connector designed for reliable electrical connections. It operates within a wide temperature range and is suitable for applications requiring specific humidity and current ratings. The connector undergoes rigorous testing to ensure its performance and durability under various environmental and mechanical stresses.
Product Attributes
- Brand: HIROSE ELECTRIC CO., LTD.
- Part Number: FH52-**S-0.5SH
- Code Number: CL580
- Drawing Number: ELC4-328248-00
- Revision Date: 15.07.25
- Copyright: Sep.1.2023 HIROSE ELECTRIC CO., LTD.
Technical Specifications
| ITEM | TEST METHOD | REQUIREMENTS | QT | AT |
| APPLICABLE STANDARD OPERATING TEMPERATURE RANGE | -40 C TO 105 C | |||
| STORAGE TEMPERATURE RANGE | -10 C TO 50 C (PACKED CONDITION) | |||
| RATING VOLTAGE | 50 V AC / DC | |||
| OPERATING OR STORAGE HUMIDITY RANGE | RELATIVE HUMIDITY | 90 % MAX (NOT DEWED) | ||
| CURRENT | 0.5 A (note 1) | |||
| APPLICABLE CABLE | t=0.30.05mm, GOLD PLATING | |||
| GENERAL EXAMINATION | VISUALLY AND BY MEASURING INSTRUMENT. ACCORDING TO DRAWING. | |||
| MARKING | CONFIRMED VISUALLY. | |||
| CONTACT RESISTANCE | 1mA(DC OR 1000Hz). BULK RESISTANCE (L=8mm) | 50 m MAX. INCLUDING FPC,FFC | ||
| INSULATION RESISTANCE | 100 V DC. | 500 M MIN. | ||
| VOLTAGE PROOF | 150 V AC FOR 1 min. | NO FLASHOVER OR BREAKDOWN. | ||
| MECHANICAL OPERATION | 20 TIMES INSERTIONS AND EXTRACTIONS. | CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| VIBRATION | FREQUENCY 10 TO 55 Hz, HALF AMPLITUDE 0.75 mm, FOR 10 CYCLES IN 3 DIRECTIONS. | NO ELECTRICAL DISCONTINUITY OF 1 s. CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| SHOCK | 981 m/s2 , DURATION OF PULSE 6 ms AT 3 TIMES IN 3 DIRECTIONS. | |||
| FPC RETENSION FORCE | MEASURED BY APPLICABLE FPC. (CONNECTOR,FPC AT INITIAL CONDITION. THICKNESS OF FPC SHALL BE t=0.30mm ) DIRECTION OF INSERTION: | 0.4n N MIN ( n : NUMBER OF CONTACTS). | ||
| RAPID CHANGE OF TEMPERATURE | TEMPERATURE-40+15TO+35+105+15TO+35C TIME 30 2 TO 3 30 2 TO 3 min. UNDER 5 CYCLES. | CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 50 M MIN. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| DAMP HEAT (STEADY STATE) | EXPOSED AT 402 C, RELATIVE HUMIDITY 90 TO 95 %, 96 h. | |||
| DAMP HEAT,CYCLIC | EXPOSED AT -10 TO +65 C, RELATIVE HUMIDITY 90 TO 96 %, 10 CYCLES,TOTAL 240 h. | CONTACT RESISTANCE: 50 m MAX. INSULATION RESISTANCE: 1 M MIN. (AT HIGH HUMIDITY) INSULATION RESISTANCE: 50 M MIN. (AT DRY) NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| DRY HEAT | EXPOSED AT 1052 C, 96 h. | CONTACT RESISTANCE: 50 m MAX. NO DAMAGE, CRACK AND LOOSENESS OF PARTS. | ||
| COLD | EXPOSED AT -403C, 96 h. | |||
| CORROSION SALT MIST | EXPOSED AT 352 C 5% SALT WATER SPRAY FOR 96 h. | CONTACT RESISTANCE: 50 m MAX. NO EVIDENCE OF CORROSION WHICH AFFECTS TO OPERATION OF CONNECTOR. | ||
| SURPHUR DIOXIDE [JIS C 60068-2-42] | EXPOSED AT 402 C , RELATIVE HUMIDITY 805% , 255 PPM FOR 96 h. | |||
| HYDROGEN SULPHIDE [JIS C 60068-2-43] | EXPOSED AT 402 C , RELATIVE HUMIDITY 805% , 10 TO 15 PPM FOR 96 h. | |||
| RESISTANCE TO SOLDERING HEAT | 1) REFLOW SOLDERING (TO BE 2 TIMES MAX.) PEAK TMP. 250 C MAX REFLOW TMP. 230 C MIN FOR 30 sec. PRE-HEATING. 150 TO 200C 90 TO 120 sec. SOLDERING IRONS : 350 10 C, FOR 5 1 sec . | NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS. | ||
| SOLDERABILITY | SOLDERED AT SOLDER TEMPERATURE, 2355 C FOR IMMERSION DURATION, 20.5 sec. | A NEW UNIFORM COATING OF SOLDER SHALL COVER A MINIMUM OF 95 % OF THE SURFACE BEING IMMERSED. |
Note: Unless otherwise specified, refer to IEC 60512. (note 1) WHEN THE SAME VALUE OF CURRENT ARE APPLID TO ALL CONTACTS AT THE SAME TIME IN ONCE, SET THE CURRENT TO THE 70 % OF THE RATED CURRENT VALUE.
2411220641_HRS-FH52-32S-0-5SH_C6619632.pdf
Send RFQ
Stock:
MOQ:
