0.3mm Pitch FPC Connector Double Sided Front Insertion Rear Flip JUSHUO AFE07 S31FMA HF for Flat Cable
Manufacturer:
JUSHUO
Description:
Front insertion and back flip type -45℃~+85℃ 31P Double-Sided Contacts, Top and Bottom Entry 0.6mm SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins) FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
翻盖式(前插后翻)
Operating Temperature:
-45℃~+85℃
Number Of Contacts:
31P
Contact Type:
双侧触点/上下接
FFC, FCB Thickness:
0.2mm
Pitch:
0.6mm
Mfr. Part #:
AFE07-S31FMA-HF
Package:
SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins)
Model Number:
AFE07-S31FMA-HF
Introduction
Product Overview
This specification covers the 0.3mm Pitch FPC/FFC Connectors (series Locking) with a height of H0.9mm. These connectors are designed for flexible flat cable applications.
Product Attributes
- Brand: (SHENZHEN JUSHUO ELECTRONICS CO.,LTD)
- Origin: China
- Certifications: UL 94V-0 (for LCP material)
Technical Specifications
| Item | Requirement | Test Condition |
| [2] Product Name and Part Number | ||
| Product Name | FFC/FPC Flat Cable Connector | |
| Part Number | AFE07-S**FMA-HF | |
| Product Specification | 0.3mm Pitch Double-Sided Front-Insertion Rear-Flip FPC Connector | |
| [3] Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A [AC/DC (Virtual value) 50Hz] | |
| Ambient Temperature Range | -45 +85 | |
| [4] Performance | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| 4.2 Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 253mm per minute. |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration | Contact Resistance 60 m MAX; Discontinuity 1 ms MAX; Appearance: No Damage | Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X.Y.Z. axes; DC 1mA energizing. |
| Shock | Discontinuity 1 ms MAX; Appearance: No Damage | 490m/s{50G}, 3 strokes in each X.Y.Z. axes; DC 1mA energizing. |
| Heat Resistance | Contact Resistance 60 m MAX; Appearance: No Damage | 852, 96 hours; then return to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance 60 m MAX; Appearance: No Damage | -402, 96 hours; then return to room temperature for 1-2 hours. |
| Humidity | Insulation Resistance 20 M MIN; Appearance: No Damage | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours. |
| Temperature Cycling | Contact Resistance 60 m MAX | 5 cycles of: a) -452 for 30 minutes; b) 852 for 30 minutes; with 10-15 minutes at room temperature between cycles. |
| Salt Spray | Contact Resistance 60 m MAX; Appearance: No Damage, Corrosion | 484 hours exposure to a salt spray from the 51% solution at 352. |
| SO2 Gas | Contact Resistance 60 m MAX; Appearance: No Damage | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas | Contact Resistance 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder Ability | Solder Wetting 95% | Soldering Time: 20.5 sec; Soldering Temperature: 2355; 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 50.5 sec; Soldering Temperature: 2605; 0.2 mm from terminal tip. |
| [5] Product Shape, Dimensions and Materials | ||
| Main Body | LCP (Natural Color) UL 94V-0 | |
| Housing Lock | LCP (Black) UL 94V-0 | |
| Terminal | Phosphor Bronze | Metal surface plated with gold |
| Contact | Phosphor Bronze | Metal surface plated with gold |
2507011715_JUSHUO-AFE07-S31FMA-HF_C49274850.pdf
Send RFQ
Stock:
MOQ:
