Flexible Flat Cable Connector 05mm Pitch JUSHUO AFC01 S40FCA HF Featuring Series Locking Mechanism
Manufacturer:
JUSHUO
Description:
-45℃~+85℃ Hinged Lid 40P Bottom Contact 0.5mm SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Operating Temperature:
-45℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
40P
Contact Type:
下接
FFC, FCB Thickness:
0.3mm
Pitch:
0.5mm
Mfr. Part #:
AFC01-S40FCA-HF
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
AFC01-S40FCA-HF
Introduction
Product Overview
The AFC01-S**FCA-HF is a 0.5mm pitch FPC/FFC connector with a series locking mechanism, designed for flexible flat cable applications. It offers reliable electrical and mechanical performance within a specified temperature range.
Product Attributes
- Brand: JUSHUO ()
- Origin: Shenzhen, China
- Certifications: HF Halogen-Free
Technical Specifications
| Item | Specification | Condition | Requirement | |
|---|---|---|---|---|
| Electrical Performance | Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | ≤20 mΩ MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500MΩ MIN | ||
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | ||
| Mechanical Performance | Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 25±3mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | |
| Terminal /Housing Retention Force | Pull the terminal at the speed rate of 25 ± 3mm per minute | 3.92N MIN | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 mΩ MAX | ||
| Environmental Performance | Temperature Rise | Carrying rated current load. (UL 498) | 30 °C MAX | |
| Vibration | DC 1mA energized; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes | Contact Resistance: 60 mΩ MAX Discontinuity: 1 ms MAX. Appearance: No Damage | ||
| Shock | DC 1mA energized; 490m/s²{50G}, 3 strokes in each X.Y.Z. axes. | Discontinuity: 1 ms MAX. Appearance: No Damage | ||
| Heat Resistance | 85±2°C, 96 hours | Contact Resistance: 60 mΩ MAX Appearance: No Damage | ||
| Cold Resistance | -40±2°C, 96 hours | Contact Resistance: 60 mΩ MAX Appearance: No Damage | ||
| Environmental Performance and Others | Humidity | Temperature: 40±2°C, Relative Humidity: 90-95%, Duration: 96 Hours | Insulation Resistance: 20 MΩ MIN Contact Resistance: 60 mΩ MAX Appearance: No Damage | |
| Temperature Cycling | 5 cycles of: a) -45±2°C (30 minutes) b) 85±2°C (30 minutes) | Contact Resistance: 60 mΩ MAX Appearance: No Damage, Corrosion | ||
| Salt Spray | 48±4 hours exposure to a salt spray from the 5&plus1;% solution at 35±2°C. | Contact Resistance: 60 mΩ MAX | ||
| SO2 Gas | 24 hours exposure to 50±5ppm SO2 gas at 40±2°C. | Contact Resistance: 60 mΩ MAX Appearance: No Damage | ||
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution | Contact Resistance: 60 mΩ MAX | ||
| Solder ability | Soldering Time: 2±0.5 sec. Soldering Temperature: 235±5°C at 0.2 mm from terminal tip | Solder Wetting: ≥95% of wetting area | ||
| Resistance to Soldering heat | Soldering Time: 5±0.5 sec. Soldering Temperature: 260±5°C at 0.2 mm from terminal tip | Appearance: No Damage, Deformation |
2506271720_JUSHUO-AFC01-S40FCA-HF_C49260532.pdf
Send RFQ
Stock:
MOQ:
