0.5mm Pitch FPC FFC Connector Flip Top Bottom Entry Locking JUSHUO AFC99 S68FIA HF for Flexible Cable
Manufacturer:
JUSHUO
Description:
Front insertion and back flip type -45℃~+85℃ 68P Bottom Contact 0.5mm SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
翻盖式(前插后翻)
Operating Temperature:
-45℃~+85℃
Number Of Contacts:
68P
Contact Type:
下接
FFC, FCB Thickness:
0.32mm
Pitch:
0.5mm
Mfr. Part #:
AFC99-S68FIA-HF
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
AFC99-S68FIA-HF
Introduction
Product Overview
This specification covers the AFC99-S**FIA-HF, a 0.5mm pitch FPC/FFC connector with a flip-top, bottom-entry design and a locking mechanism. It is designed for flexible flat cable applications.
Product Attributes
- Brand: JUSHUO ()
- Origin: Shenzhen, China
- Material: LCP (Main body, Housing Lock), Phosphor Bronze (Terminal, Contact)
- Certifications: UL 94V-0
- Color: Natural (Main body), Black (Housing Lock)
Technical Specifications
| Item | Specification | Test Condition | Requirement |
| [3] RATINGS | |||
| Rated Voltage (MAX) | 50V | ||
| Rated Current (MAX) | [AC/DC(virtual value)50Hz] | 0.5A | |
| Ambient temperature Range | -45 +85 | ||
| [4] PERFORMANCE | |||
| 4.1 Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN | |
| 4.3 Environmental and Others Performance | |||
| Repeated Insertion and Withdrawal | Contact Resistance | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | 60 m MAX |
| Temperature Rise | Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | Contact Resistance | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X.Y.Z. axes, DC 1mA energized. | 60 m MAX |
| Vibration | Discontinuity | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X.Y.Z. axes, DC 1mA energized. | 1 ms MAX. |
| Shock | Discontinuity | 490m/s{50G}, 3 strokes in each X.Y.Z. axes, DC 1mA energized. | 1 ms MAX. |
| Heat Resistance | Contact Resistance | 852, 96 hours | 60 m MAX |
| Cold Resistance | Contact Resistance | -402, 96 hours | 60 m MAX |
| Humidity | Insulation Resistance | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours | 20 M MIN |
| Humidity | Contact Resistance | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours | 60 m MAX |
| Temperature Cycling | Contact Resistance | 5 cycles of: a) -452 30 minutes, b) 852 30 minutes | 60 m MAX |
| Salt Spray | Contact Resistance | 484 hours exposure to a salt spray from the 51% solution at 352. | 60 m MAX |
| SO2 Gas | Contact Resistance | 24 hours exposure to 505ppm SO2 gas at 402. | 60 m MAX |
| NH3 Gas | Contact Resistance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | 60 m MAX |
| Solder ability | Solder Wetting | Soldering Time: 20.5 sec, Soldering Temperature: 2355, 0.2 mm from terminal tip. | 95% or more |
| Resistance to Soldering heat | Appearance | Soldering Time: 50.5 sec, Soldering Temperature: 2605, 0.2 mm from terminal tip. | No Damage, Deformation |
2507011431_JUSHUO-AFC99-S68FIA-HF_C49274854.pdf
Send RFQ
Stock:
MOQ:
