FPC FFC Flat Cable Connector Locking Mechanism Halogen Free JUSHUO AFC24-S06FIA-HF Front Flip Design
Manufacturer:
JUSHUO
Description:
Front insertion and back flip type -45℃~+85℃ 6P Double-Sided Contacts, Top and Bottom Entry 0.5mm SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
翻盖式(前插后翻)
Operating Temperature:
-45℃~+85℃
Number Of Contacts:
6P
Contact Type:
双侧触点/上下接
FFC, FCB Thickness:
0.3mm
Pitch:
0.5mm
Mfr. Part #:
AFC24-S06FIA-HF
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
AFC24-S06FIA-HF
Introduction
Product Overview
This specification covers the AFC24-S**FIA-HF, a 0.5mm pitch FPC/FFC connector with a locking mechanism and a front-flip design. It is HF halogen-free and suitable for various applications requiring reliable FPC/FFC connections.
Product Attributes
- Brand: JUSHUO ()
- Origin: Shenzhen, China
- Product Name: FFC/FPC Flat Cable Connector
- Part Number: AFC24-S**FIA-HF
- Certifications: HF Halogen-Free
Technical Specifications
| Item | Specification | Test Condition | Requirement |
| 2. Product Name and Part Number | |||
| Product Name | FFC/FPC Flat Cable Connector (Locking Series) | ||
| Part Number | AFC24-S**FIA-HF | ||
| 3. Ratings | |||
| Rated Voltage (MAX) | 50V | ||
| Rated Current (MAX) | [AC/DC (Virtual value) 50Hz] | 0.5A | |
| Ambient Temperature Range | -45 +85 | ||
| 4. Performance | |||
| 4.1 Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking | 1.96*n (N) MAX |
| Withdrawal | 0.49*n (N) MIN | ||
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN | |
| 4.3 Environmental and Other Performance | |||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance | 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | Temperature Rise | 30 MAX |
| Vibration | Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz in 1 minute, Duration: 2 hours in each X.Y.Z. axes, DC 1mA energized. | Discontinuity | 1 ms MAX |
| Appearance | No Damage | ||
| Shock | 490m/s{50G}, 3 strokes in each X.Y.Z. axes, DC 1mA energized. | Discontinuity | 1 ms MAX |
| Appearance | No Damage | ||
| Heat Resistance | 852, 96 hours, then return to room temperature for 1-2 hours. | Contact Resistance | 60 m MAX |
| Appearance | No Damage | ||
| Cold Resistance | -402, 96 hours, then return to room temperature for 1-2 hours. | Contact Resistance | 60 m MAX |
| Appearance | No Damage | ||
| Humidity | Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours, then measure within 0.5 hours at room temperature. | Insulation Resistance | 20 M MIN |
| Appearance | No Damage | ||
| Temperature Cycling | 5 cycles of: a) -452 30 minutes, b) 852 30 minutes, with 10-15 minutes at room temperature between cycles. | Contact Resistance | 60 m MAX |
| Appearance | No Damage, Corrosion | ||
| Salt Spray | 484 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water and dry. | Contact Resistance | 60 m MAX |
| Appearance | No Damage | ||
| SO2 Gas | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance | 60 m MAX |
| Appearance | No Damage | ||
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance | 60 m MAX |
| Solder ability | Soldering Time: 20.5 sec. Soldering Temperature: 2355, 0.2 mm from terminal tip. | Solder Wetting | 95% |
| Resistance to Soldering Heat | Soldering Time: 50.5 sec. Soldering Temperature: 2605, 0.2 mm from terminal tip. | Appearance | No Damage, Deformation |
| 5. Product Shape, Dimensions and Materials | |||
| Main Body | LCP (Natural Color) UL 94V-0 HF Halogen-Free | ||
| Housing Lock | LCP (Black) UL 94V-0 HF Halogen-Free | ||
| Terminal | Phosphor Bronze | ||
| Contact | Phosphor Bronze | ||
| Remark | Metal surface plated gold | ||
2506271720_JUSHUO-AFC24-S06FIA-HF_C49260538.pdf
Send RFQ
Stock:
MOQ:
