Low Profile Double Sided Surface Mount FPC FFC Connector 1.0mm Pitch JUSHUO AFA10-S12VCA-00 Flexible Cable
Manufacturer:
JUSHUO
Description:
-45℃~+85℃ Non-Latching 12P Double-Sided Contacts, Top and Bottom Entry 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Operating Temperature:
-45℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
12P
Contact Type:
双侧触点/上下接
FFC, FCB Thickness:
0.3mm
Pitch:
1mm
Mfr. Part #:
AFA10-S12VCA-00
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
AFA10-S12VCA-00
Introduction
Product Overview
The AFA10-S**VCA-00 is a 1.0mm pitch FPC/FFC connector designed for flexible flat cable applications. It features a double-sided, surface-mount design with a low profile (H2.0) and integrated solder tabs. This connector is suitable for a wide range of operating temperatures and electrical loads.
Product Attributes
- Brand: JUSHUO ()
- Origin: Shenzhen, China
- Product Name: FPC1.0mmH2.0
- Part Number: AFA10-S**VCA-00
- Certifications: UL 94V-0 (for LCP materials)
Technical Specifications
| Item | Requirement | Test Condition |
| Ratings | ||
| Rated Voltage (MAX) | 125V | |
| Rated Current (MAX) | 0.5A [AC/DC (Virtual value) 50Hz] | |
| Ambient temperature Range | -45 +85 | |
| Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. (0.3mm thickness FFC) |
| Withdrawal Force | 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 253mm per minute. |
| Environmental and Other Performance | ||
| Repeated Insertion and Withdrawal | Contact Resistance 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration | Contact Resistance 60 m MAX; Discontinuity 1 ms MAX. Appearance: No Damage | Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X.Y.Z. axes. (DC 1mA energized) |
| Shock | Discontinuity 1 ms MAX. Appearance: No Damage | 490m/s{50G}, 3 strokes in each X.Y.Z. axes. (DC 1mA energized) |
| Heat Resistance | Contact Resistance 60 m MAX; Appearance: No Damage | 852, 96 hours. Then return to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance 60 m MAX; Appearance: No Damage | -402, 96 hours. Then return to room temperature for 1-2 hours. |
| Humidity | Insulation Resistance 20 M MIN; Contact Resistance 60 m MAX; Appearance: No Damage | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours. Then measure within 0.5 hours at room temperature. |
| Temperature Cycling | Contact Resistance 60 m MAX; Appearance: No Damage, Corrosion | 5 cycles of: a) -452 for 30 minutes; b) 852 for 30 minutes; with 10-15 minutes at room temperature between cycles. |
| Salt Spray | Contact Resistance 60 m MAX; Appearance: No Damage | 484 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water and dry. |
| SO2 Gas Resistance | Contact Resistance 60 m MAX; Appearance: No Damage | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Contact Resistance 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder ability | Solder Wetting 95% coverage | Soldering Time: 20.5 sec; Soldering Temperature: 2355; 0.2 mm from terminal tip. |
| Resistance to Soldering heat | Appearance: No Damage, Deformation | Soldering Time: 50.5 sec; Soldering Temperature: 2605; 0.2 mm from terminal tip. |
| Product Shape, Dimensions and Materials | ||
| Main body | LCP (Natural) UL 94V-0 | |
| Housing Lock | LCP (Black) UL 94V-0 | |
| Terminal | Phosphor Bronze | |
| Contact | Phosphor Bronze | Metal surface plated with Gold/Tin |
2508261540_JUSHUO-AFA10-S12VCA-00_C50691266.pdf
Send RFQ
Stock:
MOQ:
