Flexible Flat Cable Connector Flip Top Locking Type JUSHUO AFC01-S45FCA-HF 0.5mm Pitch Halogen Free
Manufacturer:
JUSHUO
Description:
-45℃~+85℃ Hinged Lid 45P Bottom Contact 0.5mm SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Operating Temperature:
-45℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
45P
Contact Type:
下接
FFC, FCB Thickness:
0.3mm
Pitch:
0.5mm
Mfr. Part #:
AFC01-S45FCA-HF
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
AFC01-S45FCA-HF
Introduction
Product Overview
The AFC01-S**FCA-HF is a 0.5mm pitch FPC/FFC connector with a series locking mechanism, designed for flexible flat cable applications. It features a flip-top design for easy connection and is HF halogen-free.
Product Attributes
- Brand: JUSHUO ()
- Origin: Shenzhen, China
- Certifications: HF Halogen-free
Technical Specifications
| Item | Specification | Condition | Requirement |
| Electrical Performance | Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | ≤20 mΩ MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500MΩ MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1minute between adjacent terminal or ground. | No Breakdown | |
| Mechanical Performance | Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 25±3mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25±3mm per minute | 3.92N MIN | |
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 mΩ MAX | |
| Environmental and Other Performance | Temperature Rise | Carrying rated current load. (UL 498) | 30 °C MAX |
| Vibration | DC 1mA energized; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes | Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Shock | DC 1mA energized; 490m/s²{50G}, 3 strokes in each X.Y.Z. axes. | Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Heat Resistance | 85±2°C, 96 hours | Contact Resistance: 60 mΩ MAX. Appearance: No Damage | |
| Cold Resistance | -40±2°C, 96 hours | Contact Resistance: 60 mΩ MAX. Appearance: No Damage | |
| Humidity | Temperature: 40±2°C, Relative Humidity: 90-95%, Duration: 96 Hours | Insulation Resistance: 20 MΩ MIN. Appearance: No Damage | |
| Temperature Cycling | 5 cycles of: -45±2°C (30 min), 85±2°C (30 min) | Contact Resistance: 60 mΩ MAX. Appearance: No Damage, Corrosion | |
| Salt Spray | 48±4 hours exposure to a salt spray from the 5±1% solution at 35±2°C. | Contact Resistance: 60 mΩ MAX. Appearance: No Damage | |
| SO2 Gas | 24 hours exposure to 50±5ppm SO2 gas at 40±2°C. | Contact Resistance: 60 mΩ MAX. Appearance: No Damage | |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 mΩ MAX. Appearance: No Damage | |
| Solder Ability | Solder Wetting | Soldering Time: 2±0.5 sec. Soldering Temperature: 235±5°C at 0.2 mm from terminal tip. | Wetted Area: 95% or more. |
| Resistance to Soldering Heat | Soldering Time: 5±0.5 sec. Soldering Temperature: 260±5°C at 0.2 mm from terminal tip. | Appearance: No Damage, Deformation. |
2506271720_JUSHUO-AFC01-S45FCA-HF_C49260533.pdf
Send RFQ
Stock:
MOQ:
