Flexible flat cable connector JUSHUO AFC48-S30FKA-HF 05mm pitch FPC FFC with secure flip lock design
Manufacturer:
JUSHUO
Description:
Hinged Lid 30P Bottom Contact 0.5mm SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
翻盖式
Number Of Contacts:
30P
Contact Type:
下接
FFC, FCB Thickness:
0.3mm
Pitch:
0.5mm
Mfr. Part #:
AFC48-S30FKA-HF
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
AFC48-S30FKA-HF
Introduction
Product Overview
The AFC48-S**FKA-HF is a 0.5mm pitch FPC/FFC connector with a flip-lock mechanism and a height of 0.95mm. It is designed for flexible flat cable connections and offers reliable electrical and mechanical performance.
Product Attributes
- Brand: JUSHUO ()
- Origin: Shenzhen, China
- Product Name: FPC / FFC/FPC
- Part Number: AFC48-S**FKA-HF
- Certifications: UL 94V-0 (for LCP materials)
Technical Specifications
| Item | Specification | Condition | Requirement |
| 3. Ratings | |||
| Rated Voltage (MAX) | 50V | ||
| Rated Current (MAX) | 0.5A [AC/DC (Virtual value) 50Hz] | ||
| Ambient temperature Range | -45 +85 | ||
| 4. Performance | |||
| 4.1 Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | |
| Terminal /Housing Retention Force | Pull the terminal at the speed rate of 253mm per minute | 3.92N MIN | |
| 4.3 Environmental and Others | |||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX | |
| Temperature Rise | Carrying rated current load. (UL 498) | Temperature Rise: 30 MAX | |
| Vibration | DC 1mA energized state; Vibration along XYZ three axes; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes. | Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Shock | DC 1mA energized state; 6 mutually perpendicular directions; 490m/s {50G} impact; 3 strokes each. | Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Heat Resistance | Mate applicable FPC/FFC; Place in 852 air for 96 hours; return to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Cold Resistance | Mate applicable FPC/FFC; Place in -402 air for 96 hours; return to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Humidity | Mate applicable FPC/FFC; Place in 402, 90-95% RH air for 96 hours; measure within 0.5 hours after returning to room temperature. | Insulation Resistance: 20 M MIN Appearance: No Damage | |
| Temperature Cycling | 5 cycles of: a) -452 for 30 minutes; b) 852 for 30 minutes; with 10-15 minutes at normal temperature and humidity between cycles. | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion | |
| Salt Spray | Mate applicable FPC/FFC; 484 hours exposure to a salt spray from the 51% solution at 352. Wash with room temperature water after test; dry at room temperature. | Contact Resistance: 60 m MAX Appearance: No Damage | |
| SO2 Gas Resistance | Mate applicable FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX Appearance: No Damage | |
| NH3 Gas Resistance | Mate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX | |
| Solder Ability | Soldering Time: 20.5 sec. Soldering Temperature: 2355 0.2 mm from terminal tip | Solder Wetting: 95% or more | |
| Resistance to Soldering Heat | Soldering Time: 50.5 sec. Soldering Temperature: 2605 0.2 mm from terminal tip | Appearance: No Damage, Deformation | |
| 5. Product Shape, Dimensions and Materials | |||
| Main body | LCP (Natural Color) UL 94V-0 | ||
| Housing Lock | LCP (Black) UL 94V-0 | ||
| Terminal | Phosphor Bronze | ||
| Contact | Phosphor Bronze | Metal Surface Plated Gold | |
2506171712_JUSHUO-AFC48-S30FKA-HF_C49118415.pdf
Send RFQ
Stock:
MOQ:
