1.0 Millimeter Connector with Phosphor Copper Contacts JUSHUO AFC10-S06QCA-00 Electrical Component
Manufacturer:
JUSHUO
Description:
Connector Header 6 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Reference Series:
SH
Pins Structure:
1x6P
Contact Plating:
锡
Contact Material:
磷青铜;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
6
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
8.3mm
Z-Height Of The Board:
3.14mm
Mounting Type:
卧贴
Row Spacing:
-
Mfr. Part #:
AFC10-S06QCA-00
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
AFC10-S06QCA-00
Introduction
Product Acknowledgement
Customer: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
Product Name: 1.0mm
Material Number: AFC10-S**QCA-00 (**PIN)
Version: 1 1 version
Product Overview
This product specification applies to the 1.0 series of connectors. It details standard ratings, environmental characteristics, electrical characteristics, mechanical properties, and packaging information for the AFC10-S**QCA-00 model.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Certifications: ROHS environmental protection requirements
- Base Material: LCP E130i
- Contact Material: Phosphor copper
Technical Specifications
| Item | Specification | Test Method | Performance Requirement | |||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rated Voltage | 50V | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rated Current | 0.5A AC/DC | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Operating Temperature Range | -25+105 | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Operating Humidity Range | Relative humidity is below 90% | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Packing & Storage | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Packing | Inner packing: joint and several, Outer packing: carton. Sealed in the box, do not shake. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Transport Environment Temperature | -20~+50 | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Storage Environment Temperature | -20+50 | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Storage Humidity | Relative humidity not more than 90% | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Part Name/Material | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Base | 1.0 LCP E130i | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Reed | 1.0 Phosphor copper | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stator | 1.0 Phosphor copper | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Appearance | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Appearance | Plastic parts: no obvious scars, mottled, cracked, burr, flash, lack of material, deformation. Metal parts: smooth, no rust, oxidation, peeling, blackening, mechanical damage. | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Electrical Characteristics | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Contact Resistance | 20m Max | Plug in connector, test with contact resistance meter. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Insulation Resistance | 100M Min | Apply 500V DC between adjacent contacts and between contacts and enclosure for 1 minute. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Withstand Voltage | No breakdown and flashover | Apply 500V AC between adjacent contacts and between contacts and enclosure for 1 minute. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Environmental Characteristics | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Heating Test | Appearance: no damage. Contact Resistance: 30m Max | Place plug connector in +1052 environment for 96H, then test after 1-2H in normal environment. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Cold Tolerance Test | Appearance: no damage. Contact Resistance: 30m Max | Place plug connector in -252 environment for 96H, then test after 1-2H in normal environment. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Moisture Resistance Test | Appearance: no damage. Insulation Resistance: 50M MIN. Withstand Voltage: 200VAC/min | Place plug connector in 402, 90-96% RH environment for 96H, then test after 1-2H in normal environment. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Temperature Cycle | Appearance: no abnormality. Contact Resistance: 30m Max | 5 cycles of -253 (30min), room temp (1H), +1053 (30min), room temp (1H). Recover for 2H in normal environment. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Salt Spray Test | Appearance: no damage, corrosion. Contact Resistance: 30m Max | Continuous spray with 51% NaCl solution for 24H. Wash with distilled water and recover for 1-2H. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weldability | Tin area above 95% | Dip welded part in 2355 tin solution for 2.50.5 seconds. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Soldering Resistance | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | Place connector on PCB and subject to 2605 reflow or wave soldering for 51S. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mechanical Properties | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Pin Fixing Force | Single pin 7N min | Apply force at the front end of the pin at a rate of 253mm/min until withdrawal. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Terminal Retention in Plastic Parts | Single terminal: 5N min | Pull force at a rate of 253mm/min along the conductor direction. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Mechanical Life | Contact Resistance: 30m Max | Plug and unplug 50 times at a speed of 10 times/min without power. | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Insert/Draw Force |
| (1) Match hole seat and terminal, test insertion/withdrawal on the same axis. Remove hole seat lock (Test speed: 205mm/minute). | ||||||||||||||||||||||||||||||||||||||||||||||||||||
2410121633_JUSHUO-AFC10-S06QCA-00_C2764185.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
