0.3mm Pitch FPC FFC Connector Front Flip Locking JUSHUO AFE07-S11FMA-HF Flexible Flat Cable Connector
Manufacturer:
JUSHUO
Description:
Front insertion and back flip type -45℃~+85℃ 11P Double-Sided Contacts, Top and Bottom Entry 0.6mm SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins) FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
翻盖式(前插后翻)
Operating Temperature:
-45℃~+85℃
Number Of Contacts:
11P
Contact Type:
双侧触点/上下接
FFC, FCB Thickness:
0.2mm
Pitch:
0.6mm
Mfr. Part #:
AFE07-S11FMA-HF
Package:
SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins)
Model Number:
AFE07-S11FMA-HF
Introduction
Product Overview
The AFE07-S**FMA-HF is a 0.3mm pitch FPC/FFC connector with a front-flip locking mechanism, designed for flexible flat cable connections. It offers reliable electrical and mechanical performance suitable for various electronic applications.
Product Attributes
- Brand: JUSHUO ()
- Origin: Shenzhen, China
- Material: LCP (Main body, Housing Lock), Phosphor Bronze (Terminal, Contact)
- Color: Black (Housing Lock)
- Certifications: UL 94V-0
Technical Specifications
| Item | Test Condition | Specification |
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | ≤20 mΩ MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500MΩ MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 25±3mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 ± 3mm per minute | 3.92N MIN |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: ≦60 mΩ MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | Temperature Rise: 30 ℃ MAX |
| Vibration | DC 1mA energized state; vibration along XYZ three directions; amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Shock | DC 1mA energized state; 6 mutually perpendicular directions; 490m/s²{50G} impact; 3 times each | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Heat Resistance | Mate applicable FPC/FFC; place in 85±2℃ air for 96 hours; then return to room temperature for 1-2 hours | Contact Resistance: ≦60 mΩ MAX Appearance: No Damage |
| Cold Resistance | Mate applicable FPC/FFC; place in -40±2℃ air for 96 hours; then return to room temperature for 1-2 hours | Contact Resistance: ≦60 mΩ MAX Appearance: No Damage |
| Humidity | Mate applicable FPC/FFC; place in 40±2℃, 90-95% relative humidity air for 96 hours; then measure within 0.5 hours after returning to room temperature | Insulation Resistance: 20 MΩ MIN Appearance: No Damage |
| Temperature Cycling | Mate FPC/FFC; 5 cycles of: -45±2℃ for 30 minutes; room temperature 10-15 minutes; 85±2℃ for 30 minutes; room temperature 10-15 minutes. | Contact Resistance: ≦60 mΩ MAX Appearance: No Damage, Corrosion |
| Salt Spray | Mate FPC/FFC; 48±4 hours exposure to a salt spray from the 5±1% solution at 35±2℃. After test, wash with room temperature water; then dry at room temperature. | Contact Resistance: ≦60 mΩ MAX Appearance: No Damage |
| SO2 Gas Resistance | Mate FPC/FFC; 24 hours exposure to 50±5ppm SO2 gas at 40±2℃. | Contact Resistance: ≦60 mΩ MAX Appearance: No Damage |
| NH3 Gas Resistance | Mate FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: ≦60 mΩ MAX |
| Solder Ability | Immerse terminal tip 0.2mm from reference plane into 235±5℃ tin bath for 2±0.5 sec. | Solder Wetting: ≥95% coverage |
| Resistance to Soldering Heat | Immerse terminal tip 0.2mm from reference plane into 260±5℃ tin bath for 5±0.5 sec. | Appearance: No Damage, Deformation |
| 1. Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | [AC/DC (Virtual value) 50Hz] | 0.5A |
| Ambient Temperature Range | -45℃ ~ +85℃ | |
2507011715_JUSHUO-AFE07-S11FMA-HF_C49274845.pdf
Send RFQ
Stock:
MOQ:
