Series locking mechanism FPC FFC connector 0.5mm pitch JUSHUO AFC01-S20FCA-HF for flexible flat cable
Specifications
Operating Temperature:
-45℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
20P
Contact Type:
下接
FFC, FCB Thickness:
0.3mm
Pitch:
0.5mm
Mfr. Part #:
AFC01-S20FCA-HF
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
AFC01-S20FCA-HF
Introduction
Product Overview
The AFC01-S**FCA-HF is a 0.5mm pitch FPC/FFC connector with a series locking mechanism, designed for flexible flat cable applications. It offers reliable electrical and mechanical performance within a specified temperature range.
Product Attributes
- Brand: JUSHUO ()
- Origin: Shenzhen, China
- Certifications: HF Halogen-Free
- Material: LCP (Main body, Housing Lock), Phosphor Bronze (Terminal, Contact)
- Color: Black (Housing Lock), Natural (Main body)
Technical Specifications
| Category | Item | Specification | Test Condition |
|---|---|---|---|
| Ratings | Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A [AC/DC(virtual value)50Hz] | ||
| Ambient Temperature Range | -45 +85 | ||
| Electrical Performance | Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500 M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. | |
| Mechanical Performance | Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of positions) |
| Withdrawal Force | 0.49*n (N) MIN | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of positions) | |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 253mm per minute. | |
| Environmental and Other Performance | Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) | |
| Vibration | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX; Appearance: No Damage | Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz in 1 minute; Duration: 2 hours in each X.Y.Z. axes; DC 1mA energized. | |
| Shock | Discontinuity: 1 ms MAX; Appearance: No Damage | 490m/s{50G}, 3 strokes in each X.Y.Z. axes; DC 1mA energized. | |
| Heat Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | 852, 96 hours; then return to room temperature for 1-2 hours. | |
| Cold Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | -402, 96 hours; then return to room temperature for 1-2 hours. | |
| Humidity | Insulation Resistance: 20 M MIN; Appearance: No Damage | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours. | |
| Temperature Cycling | Contact Resistance: 60 m MAX | 5 cycles of: a) -452 for 30 minutes; b) 852 for 30 minutes; with 10-15 minutes at room temperature between cycles. | |
| Salt Spray | Contact Resistance: 60 m MAX; Appearance: No Damage, Corrosion | 484 hours exposure to a salt spray from the 51% solution at 352. | |
| SO2 Gas | Contact Resistance: 60 m MAX; Appearance: No Damage | 24 hours exposure to 505ppm SO2 gas at 402. | |
| NH3 Gas | Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
| Solderability | Solder Wetting | 95% wetting area | Soldering Time: 20.5 sec; Soldering Temperature: 2355; 0.2 mm from terminal tip. |
| Appearance | No Damage | ||
| Resistance to Soldering Heat | Appearance | No Damage, Deformation | Soldering Time: 50.5 sec; Soldering Temperature: 2605; 0.2 mm from terminal tip. |
| Contact Resistance | 60 m MAX |
2506271720_JUSHUO-AFC01-S20FCA-HF_C49260525.pdf
Send RFQ
Stock:
MOQ: