0.8mm Pitch Horizontal SMT Connector JUSHUO AFC08-S06QCA-00 Electrical and Mechanical Specifications
Manufacturer:
JUSHUO
Description:
Connector Header 0.8mm Pitch Surface Mount, Right Angle -25℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
2.82mm
Flame Retardant Rating:
UL94V-0
Pins Structure:
1x6P
Contact Plating:
锡
Contact Material:
磷青铜;LCP
Pitch:
0.8mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
6
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
7.1mm
Z-Height Of The Board:
1.85mm
Mounting Type:
卧贴
Operating Temperature:
-25℃~+85℃
Mfr. Part #:
AFC08-S06QCA-00
Package:
SMD,P=0.8mm
Model Number:
AFC08-S06QCA-00
Introduction
Product Overview
This product acknowledgment document details the specifications for the 0.8mm pitch horizontal SMT connector, AFC08-S**QCA-00. It covers standard ratings, packaging, transport, storage, component materials, appearance, electrical characteristics, environmental characteristics, and mechanical properties. This specification is applicable to the 0.8 series products.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Product Name: 0.8mm
- Product Model: AFC08-S**QCA-00
- Version: 1 1 version
- Environmental Compliance: ROHS
Technical Specifications
| Item | Specifications | Requirements |
| Standard Rating | ||
| Rated Voltage | 50V | |
| Rated Current | 0.5A AC/DC | |
| Operating Temperature Range | -2585 | |
| Operating Humidity Range | Relative humidity is below 90% | |
| Component Material | ||
| Part Name | Model | Material |
| Base | 0.8 | LCP E130i |
| Pin | 0.8 | Phosphor copper |
| Stator | 0.8 | Phosphor copper |
| Electrical Characteristics | ||
| Contact Resistance | Test Method: Plug in the connector and test with a contact resistance meter. | 20m Max |
| Insulation Resistance | Test Method: Apply 500V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | 100M Min |
| Withstand Voltage | Test Method: Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover |
| Environmental Characteristics | ||
| Heating Test | Test Method: Place plug connector in +1052 environment for 96H, then test after 1-2H recovery. | Appearance: no damage; Contact Resistance: 30m Max |
| Cold Tolerance Test | Test Method: Place plug connector in -252 environment for 96H, then test after 1-2H recovery. | Appearance: no damage; Contact Resistance: 30m Max |
| Moisture Resistance Test | Test Method: Place plug connector in 402, 90-96% RH environment for 96H, then test after 1-2H recovery. | Appearance: no damage; Insulation Resistance: 50M MIN; Withstand Voltage: 300V AC/minute MIN |
| Temperature Cycle | Test Method: 5 cycles of -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H), then 2H recovery. | Appearance: no abnormality; Contact Resistance: 30m Max |
| Salt Spray Test | Test Method: Continuous spray with 51% NaCl solution for 24H, then wash with distilled water and recover for 1-2H. | Appearance: no damage, corrosion; Contact Resistance: 30m Max |
| Weldability | Test Method: Dip welded part in 2455 tin solution for 2.50.5 seconds. | Tin coverage area: 95% or more |
| Soldering Resistance | Test Method: Reflow or wave soldering at 2605 for 51S. | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. |
| Mechanical Properties | ||
| Pin Fixing Force | Test Method: Apply force to pin end at 253mm/min rate until pin withdraws. | Single pin: 5N Min |
| Terminal Retention in Plastic Parts | Test Method: Pull terminal from socket at 253mm/min rate along wire direction. | Single terminal: 5N Min |
| Mechanical Life | Test Method: Plug and unplug 30 times at 10 times/min speed without power. | Contact Resistance: 30m Max |
| Insertion/Extraction Force | Test Method: Fit socket and terminal, test insertion/extraction on the same axis (speed: 205mm/min), remove socket lock. | See table below for specific forces per position. |
| Insertion Force (N) | 1: 3.00, 2: 8.00, 3: 11.00, 4: 14.00, 5: 17.00, 6: 20.00, 7: 23.00, 8: 26.00, 9: 29.00, 10: 32.00, 11: 35.00, 12: 38.00, 13: 41.00, 14: 44.00, 15: 47.00, 16: 50.00 | |
| Extraction Force (N) | 1: 0.50, 2: 2.00, 3: 2.50, 4: 3.00, 5: 3.50, 6: 4.00, 7: 4.50, 8: 5.00, 9: 5.50, 10: 6.00, 11: 6.50, 12: 7.00, 13: 7.50, 14: 8.00, 15: 8.50, 16: 9.00 | |
2410121633_JUSHUO-AFC08-S06QCA-00_C2934859.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
