JUSHUO AFE07 S45FMA HF 0.3mm Pitch Front Flip Locking Connector for Flexible Flat Cable Applications
Manufacturer:
JUSHUO
Description:
Front insertion and back flip type -45℃~+85℃ 45P Double-Sided Contacts, Top and Bottom Entry 0.6mm SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins) FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
翻盖式(前插后翻)
Operating Temperature:
-45℃~+85℃
Number Of Contacts:
45P
Contact Type:
双侧触点/上下接
FFC, FCB Thickness:
0.2mm
Pitch:
0.6mm
Mfr. Part #:
AFE07-S45FMA-HF
Package:
SMD,P=0.3mm,Surface Mount,Right Angle(Staggered Pins)
Model Number:
AFE07-S45FMA-HF
Introduction
Product Overview
This specification covers the 0.3mm Pitch FPC/FFC Connectors (series Locking) from Shenzhen Jushuo Electronics Co., Ltd. These connectors are designed for flexible flat cable applications and feature a front-flip locking mechanism with a height of H0.9mm.
Product Attributes
- Brand: Jushuo ()
- Origin: Shenzhen, China
- Material: Main body: LCP (Natural) UL 94V-0; Housing Lock: LCP (Black) UL 94V-0; Terminal/Contact: Phosphor Bronze (Metal surface plated gold)
- Color: Black (Housing Lock)
- Certifications: UL 94V-0
Technical Specifications
| Item | Specification | Test Condition |
| Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A [AC/DC (Virtual value) 50Hz] | |
| Ambient Temperature Range | -45 +85 | |
| Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Withdrawal Force | 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 25 3mm per minute. |
| Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX; Appearance: No Damage | DC 1mA powered state; Vibration along XYZ three axes; Amplitude: 1.5mm; Frequency: 10-55-10Hz/min; Duration: 2 hours. |
| Shock | Discontinuity: 1 ms MAX; Appearance: No Damage | DC 1mA powered state; 490m/s {50G} shock in each of the 6 mutually perpendicular directions; 3 times each. |
| Heat Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | Mate applicable FPC/FFC; Place in 852 air for 96 hours; then return to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | Mate applicable FPC/FFC; Place in -402 air for 96 hours; then return to room temperature for 1-2 hours. |
| Humidity | Insulation Resistance: 20 M MIN; Appearance: No Damage | Mate applicable FPC/FFC; Place in 402, 90-95% relative humidity air for 96 hours; measure within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Contact Resistance: 60 m MAX | 5 cycles of: 30 minutes at -452, 10-15 minutes at room temp/humidity, 30 minutes at 852, 10-15 minutes at room temp/humidity. |
| Salt Spray | Contact Resistance: 60 m MAX; Appearance: No Damage, Corrosion | 484 hours exposure to a salt spray from the 51% solution at 352. After the test, wash with room temperature water and dry at room temperature. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder Ability | Solder Wetting: 95% of wetting area | Soldering Time: 20.5 sec. Soldering Temperature: 2355, 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 50.5 sec. Soldering Temperature: 2605, 0.2 mm from terminal tip. |
2507011715_JUSHUO-AFE07-S45FMA-HF_C49274852.pdf
Send RFQ
Stock:
MOQ:
