1.0mm pitch FPC FFC connector JUSHUO AFA10 S20VCA 00 ultra thin 2.0mm height double sided connection
Manufacturer:
JUSHUO
Description:
-45℃~+85℃ Non-Latching 20P Double-Sided Contacts, Top and Bottom Entry 1mm SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Operating Temperature:
-45℃~+85℃
Locking Feature:
无锁
Number Of Contacts:
20P
Contact Type:
双侧触点/上下接
FFC, FCB Thickness:
0.3mm
Pitch:
1mm
Mfr. Part #:
AFA10-S20VCA-00
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
AFA10-S20VCA-00
Introduction
Product Overview
This specification covers the 1.0mm Pitch FPC/FFC Connectors, specifically the AFA10-S**VCA-00 model. These ultra-thin connectors, with a height of 2.0mm, are designed for double-sided connection with solder tabs, suitable for flexible flat cables.
Product Attributes
- Brand: (SHENZHEN JUSHUO ELECTRONICS CO.,LTD)
- Origin:
- Certifications: UL 94V-0 (for LCP materials)
- Color: Black (Housing Lock), Natural (Main body)
Technical Specifications
| Item | Test Condition | Specification |
| [3] RATINGS | ||
| Rated Voltage (MAX) | 125V | |
| Rated Current (MAX) | [AC/DC(Virtual value)50Hz] | 0.5A |
| Ambient temperature Range | -45 +85 | |
| [4] PERFORMANCE | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 253mm per minute | 3.92N MIN |
| 4.3 Environmental and Others Performance | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | Temperature Rise: 30 MAX |
| Vibration | DC 1mA energized state; vibration along XYZ three directions; amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Shock | DC 1mA energized state; along 6 mutually perpendicular directions; 490m/s2{50G} impact; 3 times each | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Heat Resistance | Mate applicable FPC/FFC; placed in 852 air for 96 hours; then return to room temperature for 1-2 hours | Contact Resistance: 60 m MAX Appearance: No Damage |
| Cold Resistance | Mate applicable FPC/FFC; placed in -402 air for 96 hours; then return to room temperature for 1-2 hours | Contact Resistance: 60 m MAX Appearance: No Damage |
| Humidity | Mate applicable FPC/FFC; placed in 402, 90-95% RH air for 96 hours; measured within 0.5 hours after returning to room temperature | Insulation Resistance: 20 M MIN Appearance: No Damage |
| Temperature Cycling | Mate FPC/FFC; -452 for 30 minutes; room temp/humidity 10-15 minutes; 852 for 30 minutes; room temp/humidity 10-15 minutes, cycle 5 times. | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion |
| Salt Spray | Mate FPC/FFC; 48 hours exposure to 51% salt water spray at 352. After test, wash with room temperature water and dry. | Contact Resistance: 60 m MAX |
| SO2 Gas Resistance | Mate FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX Appearance: No Damage |
| NH3 Gas Resistance | Mate FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX |
| Solder ability | Terminal tip immersed 0.2mm from reference plane into 2355 tin bath for 20.5 sec. | Solder Wetting: 95% coverage |
| Resistance to Soldering heat | Terminal tip immersed 0.2mm from reference plane into 2605 tin bath for 50.5 sec. | Appearance: No Damage, Deformation |
| [5] PRODUCT SHAPE, DIMENSIONS AND MATERIALS | ||
| Main body | LCP (Natural) UL 94V-0 | |
| Housing Lock | LCP (Black) UL 94V-0 | |
| Terminal | Phosphor Bronze | |
| Contact | Phosphor Bronze | |
| Remark | Metal surface plated gold/tin | |
2508261540_JUSHUO-AFA10-S20VCA-00_C50691268.pdf
Send RFQ
Stock:
MOQ:
