FPC FFC Connector with Series Locking Mechanism JUSHUO AFC01-S10FCA-HF 05mm Pitch Halogen Free Design
Manufacturer:
JUSHUO
Description:
-45℃~+85℃ Hinged Lid 10P Bottom Contact 0.5mm SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Operating Temperature:
-45℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
10P
Contact Type:
下接
FFC, FCB Thickness:
0.3mm
Pitch:
0.5mm
Mfr. Part #:
AFC01-S10FCA-HF
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
AFC01-S10FCA-HF
Introduction
Product Overview
The AFC01-S**FCA-HF is a 0.5mm pitch FPC/FFC connector with a series locking mechanism, designed for flexible flat cable applications. It offers reliable electrical and mechanical performance within a specified temperature range.
Product Attributes
- Brand: JUSHUO ()
- Origin: Shenzhen, China
- Certifications: HF Halogen-Free (HF)
- Materials: LCP (Main body, Housing Lock), Phosphor Bronze (Terminal, Contact)
- Color: Black (Housing Lock), Natural (Main body)
Technical Specifications
| Item | Specification | Test Condition |
|---|---|---|
| 1. Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A [AC/DC(Virtual value)50Hz] | |
| Ambient temperature Range | -45 +85 | |
| 2. Electrical Performance | ||
| Contact Resistance | 20 m MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500M MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| 3. Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 253mm/minute. (0.3mm thick FFC) |
| Withdrawal Force | 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 253mm per minute. |
| 4. Environmental and Other Performance | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute (no power). |
| Temperature Rise | 30 MAX | Carrying rated current load. (UL 498) |
| Vibration | Contact Resistance: 60 m MAX; Discontinuity: 1 ms MAX; Appearance: No Damage | Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X,Y,Z axes (DC 1mA) |
| Shock | Discontinuity: 1 ms MAX; Appearance: No Damage | 490m/s{50G}, 3 strokes in each X,Y,Z axes (DC 1mA) |
| Heat Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | 852, 96 hours, then return to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | -402, 96 hours, then return to room temperature for 1-2 hours. |
| Humidity | Insulation Resistance: 20 M MIN; Appearance: No Damage | Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours. Measured within 0.5 hours after returning to room temp. |
| Temperature Cycling | Contact Resistance: 60 m MAX; Appearance: No Damage, Corrosion | 5 cycles of: -452 (30 min) -> Room Temp (10-15 min) -> 852 (30 min) -> Room Temp (10-15 min). |
| Salt Spray | Contact Resistance: 60 m MAX; Appearance: No Damage | 484 hours exposure to a salt spray from the 51% solution at 352. Washed with room temp water and dried. |
| SO2 Gas Resistance | Contact Resistance: 60 m MAX; Appearance: No Damage | 24 hours exposure to 505ppm SO2 gas at 402. |
| NH3 Gas Resistance | Contact Resistance: 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 95% of area covered | Soldering Time: 20.5 sec; Soldering Temperature: 2355 at 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 50.5 sec; Soldering Temperature: 2605 at 0.2 mm from terminal tip. |
2506271720_JUSHUO-AFC01-S10FCA-HF_C49260519.pdf
Send RFQ
Stock:
MOQ:
