Flexible Flat Cable Connector JUSHUO AFA10-S22ECA-00 Featuring 1.0mm Pitch and UL 94V-0 Certification
Manufacturer:
JUSHUO
Description:
SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Mfr. Part #:
AFA10-S22ECA-00
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
AFA10-S22ECA-00
Introduction
Product Overview
The AFA10-S**ECA-00 and AFA10-S**ECC-00 are 1.0mm pitch FPC/FFC connectors designed for flexible flat cable applications. They offer reliable electrical and mechanical performance suitable for various environmental conditions.
Product Attributes
- Brand: JUSHUO ()
- Origin: Shenzhen, China
- Materials: LCP (Main body, Housing Lock), Phosphor Bronze (Terminal, Contact)
- Certifications: UL 94V-0
Technical Specifications
| Item | Specification | Test Condition | Requirement |
| Electrical Performance | Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | ≤20 mΩ MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500MΩ MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| Mechanical Performance | Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 25±3mm/minute. | Locking: 1.96*n (N) MAX, Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 25 ± 3mm per minute | 3.92N MIN | |
| Environmental Performance | Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 mΩ MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | Temperature Rise: 30 ℃ MAX | |
| Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes DC 1mA | Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Shock | 490m/s²{50G}, 3 strokes in each X.Y.Z. axes. DC 1mA | Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Heat Resistance | 85±2℃, 96 hours | Contact Resistance: 60 mΩ MAX. Appearance: No Damage | |
| Cold Resistance | -40±2℃, 96 hours | Contact Resistance: 60 mΩ MAX. Appearance: No Damage | |
| Humidity | Temperature: 40±2℃ Relative Humidity: 90-95% Duration: 96 Hours | Insulation Resistance: 20 MΩ MIN. Appearance: No Damage | |
| Temperature Cycling | 5 cycles of: a) -45±2℃ 30 minutes b) 85±2℃ 30 minutes | Contact Resistance: 60 mΩ MAX. Appearance: No Damage, Corrosion | |
| Salt Spray | 48±4 hours exposure to a salt spray from the 5±1% solution at 35±2℃. | Contact Resistance: 60 mΩ MAX. Appearance: No Damage | |
| SO2 Gas | 24 hours exposure to 50±5ppm. SO2 gas at 40±2℃. | Contact Resistance: 60 mΩ MAX. Appearance: No Damage | |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution | Contact Resistance: 60 mΩ MAX. Appearance: No Damage | |
| Solderability | Soldering Time: 2±0.5 sec. Soldering Temperature: 235±5℃ 0.2 mm from terminal tip | Solder Wetting: >95% coverage | |
| Resistance to Soldering Heat | Soldering Time: 5±0.5 sec. Soldering Temperature: 260±5℃ 0.2 mm from terminal tip | Appearance: No Damage, Deformation |
2512171500_JUSHUO-AFA10-S22ECA-00_C53190729.pdf
Send RFQ
Stock:
MOQ:
