FPC FFC Connector 0.5mm Pitch JUSHUO AFC01-S26FCA-HF Series Locking Halogen Free Dielectric Strength
Manufacturer:
JUSHUO
Description:
-45℃~+85℃ Hinged Lid 26P Bottom Contact 0.5mm SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Operating Temperature:
-45℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
26P
Contact Type:
下接
FFC, FCB Thickness:
0.3mm
Pitch:
0.5mm
Mfr. Part #:
AFC01-S26FCA-HF
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
AFC01-S26FCA-HF
Introduction
Product Overview
This specification covers the 0.5mm pitch FPC/FFC connectors (series locking) from Shenzhen Jushuo Electronics Co., Ltd. These connectors are designed for FPC/FFC applications with a locking mechanism.
Product Attributes
- Brand: Jushuo ()
- Origin: Shenzhen, China
- Certifications: HF Halogen-Free (HF)
Technical Specifications
| Item | Specification | Test Condition | Requirement |
| [3] RATINGS | |||
| Rated Voltage (MAX) | 50V | ||
| Rated Current (MAX) | [AC/DC( Virtual value)50Hz] | 0.5A | |
| Ambient temperature Range | -45 +85 | ||
| [4] PERFORMANCE | |||
| 4.1 Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN | |
| Dielectric | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1minute between adjacent terminal or ground. | No Breakdown | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (for 0.3mm thick FFC) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | |
| Terminal /Housing Retention Force | Pull the terminal at the speed rate of 25 3mm per minute | 3.92N MIN | |
| 4.3 Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute | Contact Resistance: 60 m MAX | |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX | |
| Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes (under DC 1mA energized state) | Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Shock | 490m/s2{50G}, 3 strokes in each X.Y.Z. axes. (under DC 1mA energized state) | Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Heat Resistance | 852, 96 hour (after mating FPC/FFC and returning to room temp for 1-2 hours) | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Cold Resistance | -402, 96 hour (after mating FPC/FFC and returning to room temp for 1-2 hours) | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Humidity | Temperature: 402 Relative Humidity: 90-95% Duration: 96 Hours (after mating FPC/FFC and returning to room temp within 0.5 hours) | Insulation Resistance: 20 M MIN Appearance: No Damage | |
| Temperature Cycling | 5 cycles of: a) -452 30 minutes b) 852 30 minutes (with 10-15 minutes at room temp between cycles) | Contact Resistance: 60 m MAX | |
| Salt Spray | 484 hours exposure to a salt spray from the 51% solution at 352. (after mating FPC/FFC, then washed with room temp water and dried) | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion | |
| SO2 Gas | 24 hours exposure to 505ppm. SO2 gas at 402. (after mating FPC/FFC) | Contact Resistance: 60 m MAX Appearance: No Damage | |
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. (after mating FPC/FFC) | Contact Resistance: 60 m MAX | |
| Solder ability | Soldering Time: 20.5 sec. Soldering Temperature: 2355 0.2 mm from terminal tip | Solder Wetting: 95% or more | |
| Resistance to Soldering heat | Soldering Time: 50.5 sec. Soldering Temperature: 2605 0.2 mm from terminal tip | Appearance: No Damage, Deformation | |
2506271720_JUSHUO-AFC01-S26FCA-HF_C49260528.pdf
Send RFQ
Stock:
MOQ:
