Durable 2.5mm Vertical SMT Connector JUSHUO AFC25-S04CCA-00 with ROHS Certification and 3 Amp Rating
Manufacturer:
JUSHUO
Description:
Connector Header 4 position 2.5mm Pitch 3A Surface Mount,Vertical -20℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
5.95mm
Reference Series:
XH
Pins Structure:
1x4P
Contact Plating:
锡
Contact Material:
黄铜;LCP
Operating Temperature:
-20℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
2.5mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
4
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
12.5mm
Z-Height Of The Board:
7.9mm
Row Spacing:
-
Mounting Type:
立贴
Mfr. Part #:
AFC25-S04CCA-00
Package:
SMD,P=2.5mm
Model Number:
AFC25-S04CCA-00
Introduction
Product Overview
This product acknowledgment document details the specifications for the 2.5mm vertical SMT connector, model AFC25-S**CCA-00. It outlines standard ratings, packaging, transportation, storage, component details, electrical characteristics, and environmental and mechanical properties.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: China
- Product Name: 2.5mm Vertical SMT Connector
- Product Model: AFC25-S**CCA-00
- Version: 1 1 version
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specifications | Requirements |
| Standard Rating | ||
| Rated Voltage | 250V | |
| Rated Current | 3.0A AC/DC | |
| Operating Temperature Range | -25+105 | |
| Operating Humidity Range | Relative humidity is below 90% | |
| Packing | ||
| Inner packing is joint and several, outer packing is carton, product is sealed in the box, do not shake. | ||
| Transport | ||
| Allowed by any means, avoid rain, snow and sunlight, no mechanical damage such as collision and extrusion. Transport ambient temperature: -20 to +50. | ||
| Storage | ||
| Ambient temperature: -20 to +50, relative humidity not more than 90%, no acid, alkaline and other corrosive gases. | ||
| Component Name / Material | ||
| Part Name | Model | Material |
| Base | 2.5 | LCP E130i |
| Pin | 2.5 | Brass |
| Stator | 2.5 | Brass |
| Appearance and Size | ||
| Appearance: Plastic parts surface should be free of obvious scars, mottled, cracked, burr, flash, lack of material and deformation affecting use. Metal parts surface should be smooth and clean, no rust, oxidation, peeling, blackening and obvious mechanical damage. Size: Refer to engineering drawing. | ||
| Electrical Characteristics | ||
| Contact Resistance | Test Method: Measure between two terminals of the connector after plugging in. | 20m Max |
| Insulation Resistance | Test Method: Apply 1000V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute after plugging in. | 1000M Min |
| Withstand Voltage | Test Method: Apply 1000V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute after plugging in. | No breakdown and flashover |
| Environmental Characteristics | ||
| Heating Test | Test Method: Plugged connector in +1052 for 96H, then placed in normal environment for 1~2H before testing. | Appearance: no damage. Contact Resistance: 30m Max |
| Cold Tolerance Test | Test Method: Plugged connector in -252 for 96H, then placed in normal environment for 1~2H before testing. | Appearance: no damage. Contact Resistance: 30m Max |
| Moisture Resistance Test | Test Method: Plugged connector in 402, 90~96% RH for 96H, then placed in normal environment for 1~2H before testing. | Appearance: no damage. Insulation Resistance: 500M Min. Withstand Voltage: 800V AC/minute MIN |
| Temperature Cycle | Test Method: 5 cycles of -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H). Recover 2H in normal environment before inspection. | Appearance: no abnormality. Contact Resistance: 30m Max |
| Salt Spray Test | Test Method: Continuous spray with 51% NaCl solution for 24H. Wash with distilled water and recover 1~2H at normal temperature. | Appearance: no damage or corrosion. Contact Resistance: 30m Max |
| Weldability | Test Method: Dip the part to be welded into 2455 tin solution for 2.50.5 seconds. | Tin area above 95% |
| Soldering Resistance | Test Method: Place connector on PCB and reflow at 2605 for 51S or wave soldering. | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. |
| Mechanical Properties | ||
| Pin Fixing Force | Test Method: Fix pin holder on drawing machine, apply force at 253mm/min until pin withdraws. | Single pin: 12N Min |
| Terminal Retention in Plastic Parts | Test Method: Pull terminal out of socket at 253mm/min along conductor direction. | Single terminal: 15N Min |
| Mechanical Life | Test Method: Plug and unplug 50 times at 10 times/min under no power. | Contact Resistance: 30m Max |
| Insertion/Extraction Force | Test Method: Fit socket and terminal, test insertion/extraction on the same axis with needle seat (lock removed). Speed: 205mm/min. | See table below for specific force requirements per position. |
| Insertion/Extraction Force (N) | |||||
| Position | Insert | Pull Out | Position | Insert | Pull Out |
| 1 | 16.00 | 2.00 | 9 | 48.00 | 24.00 |
| 2 | 20.00 | 10.00 | 10 | 52.00 | 26.00 |
| 3 | 24.00 | 12.00 | 11 | 56.00 | 28.00 |
| 4 | 28.00 | 14.00 | 12 | 60.00 | 30.00 |
| 5 | 32.00 | 16.00 | 13 | 64.00 | 32.00 |
| 6 | 36.00 | 18.00 | 14 | 68.00 | 34.00 |
| 7 | 40.00 | 20.00 | 15 | 72.00 | 36.00 |
| 8 | 44.00 | 22.00 | 16 | 76.00 | 38.00 |
2410121633_JUSHUO-AFC25-S04CCA-00_C2764258.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
