1.0mm Pitch FPC FFC Connector JUSHUO AFA10-S30ECA-00 with Locking Mechanism and High Dielectric Strength
Manufacturer:
JUSHUO
Description:
SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Mfr. Part #:
AFA10-S30ECA-00
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
AFA10-S30ECA-00
Introduction
Product Overview
This specification covers the 1.0mm Pitch FPC/FFC Connectors, specifically the AFA10-S**ECA-00 and AFA10-S**ECC-00 series. These connectors are designed for flexible flat cable applications.
Product Attributes
- Brand: JUSHUO ()
- Origin: Shenzhen, China
- Materials: LCP (Main body, Housing Lock), Phosphor Bronze (Terminal, Contact)
- Certifications: UL 94V-0
Technical Specifications
| Item | Specification | Test Condition | Requirement |
| Electrical Performance | Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| Mechanical Performance | Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 253mm per minute. | 3.92N MIN | |
| Environmental Performance | Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | Temperature Rise: 30 MAX | |
| Vibration | DC 1mA energized state; vibration along XYZ axes; amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours. | Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Shock | DC 1mA energized state; along 6 mutually perpendicular directions; 490m/s2{50G} impact; 3 times each. | Discontinuity: 1 ms MAX. Appearance: No Damage | |
| Heat Resistance | Mate applicable FPC/FFC; place in 852 air for 96 hours; then return to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Cold Resistance | Mate applicable FPC/FFC; place in -402 air for 96 hours; then return to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Humidity | Mate applicable FPC/FFC; place in 402, 90-95% RH air for 96 hours; then measure within 0.5 hours after returning to room temperature. | Insulation Resistance: 20 M MIN Appearance: No Damage | |
| Temperature Cycling | Mate FPC/FFC; -452 for 30 minutes; room temp/humidity for 10-15 minutes; 852 for 30 minutes; room temp/humidity for 10-15 minutes; cycle 5 times. | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion | |
| Salt Spray | Mate FPC/FFC; 48 hours exposure to 352, 51% salt spray; wash with room temperature water after test; then dry at room temperature. | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion | |
| SO2 Gas | Mate FPC/FFC; 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX Appearance: No Damage | |
| NH3 Gas | Mate FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX Appearance: No Damage | |
| Solderability | Dip the front end of the terminal at 0.2mm from the reference plane into a 2355 tin bath; duration 20.5 sec. | Solder Wetting: 95% coverage | |
| Resistance to Soldering Heat | Dip the front end of the terminal at 0.2mm from the reference plane into a 2605 tin bath; duration 50.5 sec. | Appearance: No Damage, Deformation |
2512171500_JUSHUO-AFA10-S30ECA-00_C53190730.pdf
Send RFQ
Stock:
MOQ:
