Halogen free flip top FPC FFC connector 0.5mm pitch locking JUSHUO AFC01 S04FCA HF for flat cable
Specifications
Operating Temperature:
-45℃~+85℃
Locking Feature:
翻盖式
Number Of Contacts:
4P
Contact Type:
下接
FFC, FCB Thickness:
0.3mm
Pitch:
0.5mm
Mfr. Part #:
AFC01-S04FCA-HF
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
AFC01-S04FCA-HF
Introduction
Product Overview
The AFC01-S**FCA-HF is a 0.5mm pitch FPC/FFC connector with a series locking mechanism, designed for flexible flat cable applications. It features a flip-top design for easy connection and is HF halogen-free.
Product Attributes
- Brand: JUSHUO ()
- Origin: Shenzhen, China
- Material: LCP (Main body, Housing Lock), Phosphor Bronze (Terminal, Contact)
- Certifications: HF Halogen-Free
Technical Specifications
| Item | Specification | Test Condition |
| 4.1 Electrical Performance | ||
| Contact Resistance | ≤20 mΩ MAX | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. |
| Insulation Resistance | 500MΩ MIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. |
| 4.2 Mechanical Performance | ||
| Locking Force | 1.96*n (N) MAX | Insert and extract applicable FFC at the speed rate of 25±3mm/minute. (0.3mm thick FFC) |
| Withdrawal Force | 0.49*n (N) MIN | |
| Terminal /Housing Retention Force | 3.92N MIN | Pull the terminal at the speed rate of 25 ± 3mm per minute. |
| 4.3 Environmental Performance and Others | ||
| Repeated Insertion and Withdrawal | Contact Resistance: 60 mΩ MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. (No power) |
| Temperature Rise | 30 °C MAX | Carrying rated current load. (UL 498) |
| Vibration | Contact Resistance: 60 mΩ MAX Discontinuity: 1 ms MAX. Appearance: No Damage | DC 1mA energized state; Vibration along XYZ three directions; Amplitude: 1.5mm P-P; Frequency: 10-55-10Hz/min; Duration: 2 hours in each X,Y,Z axes. |
| Shock | Discontinuity: 1 ms MAX. Appearance: No Damage | DC 1mA energized state; 490m/s² {50G} shock, 3 strokes in each X,Y,Z axes. |
| Heat Resistance | Contact Resistance: 60 mΩ MAX Appearance: No Damage | Mate applicable FPC/FFC; Place in 85±2 air for 96 hours; then return to room temperature for 1-2 hours. |
| Cold Resistance | Contact Resistance: 60 mΩ MAX Appearance: No Damage | Mate applicable FPC/FFC; Place in -40±2 air for 96 hours; then return to room temperature for 1-2 hours. |
| Humidity | Insulation Resistance: 20 MΩ MIN Contact Resistance: 60 mΩ MAX Appearance: No Damage | Mate applicable FPC/FFC; Place in 40±2, 90-95% RH air for 96 hours; then measure within 0.5 hours after returning to room temperature. |
| Temperature Cycling | Contact Resistance: 60 mΩ MAX | 5 cycles of: -45±2 for 30 minutes; Room temp/humidity for 10-15 minutes; 85±2 for 30 minutes; Room temp/humidity for 10-15 minutes. |
| Salt Spray | Contact Resistance: 60 mΩ MAX Appearance: No Damage, Corrosion | 48&plus1.4;4 hours exposure to a salt spray from the 5±1% solution at 35±2. After test, wash with room temp water and dry. |
| SO2 Gas | Contact Resistance: 60 mΩ MAX Appearance: No Damage | 24 hours exposure to 50±5ppm SO2 gas at 40±2. |
| NH3 Gas | Contact Resistance: 60 mΩ MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solder Ability | Solder Wetting: ≥95% wetting area | Soldering Time: 2±0.5 sec. Soldering Temperature: 235±5, 0.2 mm from terminal tip. |
| Resistance to Soldering Heat | Appearance: No Damage, Deformation | Soldering Time: 5±0.5 sec. Soldering Temperature: 260±5, 0.2 mm from terminal tip. |
| Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | 0.5A [AC/DC (virtual value) 50Hz] | |
| Ambient temperature Range | -45 +85 | |
2506271720_JUSHUO-AFC01-S04FCA-HF_C49260514.pdf
Send RFQ
Stock:
MOQ: