0.5mm pitch FPC FFC connector JUSHUO AFC24-S12FIA-HF with locking mechanism and halogen free compliance
Manufacturer:
JUSHUO
Description:
Front insertion and back flip type -45℃~+85℃ 12P Double-Sided Contacts, Top and Bottom Entry 0.5mm SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
翻盖式(前插后翻)
Operating Temperature:
-45℃~+85℃
Number Of Contacts:
12P
Contact Type:
双侧触点/上下接
FFC, FCB Thickness:
0.3mm
Pitch:
0.5mm
Mfr. Part #:
AFC24-S12FIA-HF
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
AFC24-S12FIA-HF
Introduction
Product Overview
The AFC24-S**FIA-HF is a 0.5mm pitch FPC/FFC connector with a locking mechanism. It is designed for double-sided contact and features a front-insertion, back-flipping actuator with a height of 2.0mm and HF halogen-free compliance. This connector is suitable for applications requiring reliable and secure connection of flexible flat cables.
Product Attributes
- Brand: Jushuo ()
- Origin: Shenzhen, China
- Certifications: HF Halogen-Free
- Materials: Main body: LCP (natural, UL 94V-0, HF Halogen-Free); Housing Lock: LCP (black, UL 94V-0, HF Halogen-Free); Terminals/Contact: Phosphor Bronze (metal surface plated gold)
Technical Specifications
| Item | Specification/Condition | Requirement |
| [3] Ratings | ||
| Rated Voltage (MAX) | 50V | |
| Rated Current (MAX) | [AC/DC (Virtual value) 50Hz] | 0.5A |
| Ambient Temperature Range | -45 +85 | |
| [4] Performance | ||
| 4.1 Electrical Performance | ||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | 500M MIN |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. | No Breakdown |
| 4.2 Mechanical Performance | ||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of positions) | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 253mm per minute. | 3.92N MIN |
| 4.3 Environmental and Other Performance | ||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | DC 1mA energized state; amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours in each X, Y, Z axes. | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Shock | DC 1mA energized state; 490m/s {50G} shock; 3 strokes in each X, Y, Z axes. | Discontinuity: 1 ms MAX. Appearance: No Damage |
| Heat Resistance | Place in 852 air for 96 hours, then return to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Cold Resistance | Place in -402 air for 96 hours, then return to room temperature for 1-2 hours. | Contact Resistance: 60 m MAX Appearance: No Damage |
| Humidity | Place in 402, 90-95% RH air for 96 hours, then measure within 0.5 hours after returning to room temperature. | Insulation Resistance: 20 M MIN Appearance: No Damage |
| Temperature Cycling | 5 cycles of: -452 for 30 minutes; normal temperature and humidity for 10-15 minutes; 852 for 30 minutes; normal temperature and humidity for 10-15 minutes. | Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion |
| Salt Spray | 484 hours exposure to a salt spray from a 51% solution at 352. After test, wash with room temperature water and dry. | Contact Resistance: 60 m MAX Appearance: No Damage |
| SO2 Gas Resistance | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 m MAX Appearance: No Damage |
| NH3 Gas Resistance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: 60 m MAX |
| Solderability | Immerse 0.2mm from terminal tip into a 2355 tin bath for 20.5 sec. | Solder Wetting: 95% coverage |
| Resistance to Soldering Heat | Immerse 0.2mm from terminal tip into a 2605 tin bath for 50.5 sec. | Appearance: No Damage, Deformation |
2506271720_JUSHUO-AFC24-S12FIA-HF_C49260541.pdf
Send RFQ
Stock:
MOQ:
