1.0mm Pitch Horizontal SMT Connector JUSHUO AFC10-S14QCA-00 Electrical and Mechanical Specifications
Manufacturer:
JUSHUO
Description:
Connector Header 14 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
4.2mm
Pins Structure:
1x14P
Reference Series:
SH
Contact Plating:
锡
Contact Material:
磷青铜;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
14
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
15.2mm
Z-Height Of The Board:
3.05mm
Mounting Type:
卧贴
Row Spacing:
-
Mfr. Part #:
AFC10-S14QCA-00
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
AFC10-S14QCA-00
Introduction
Product Acknowledgement
Customer: (SHENZHEN JUSHUO ELECTRONIC CO.,LTD)
Product Name: 1.0mm (1.0mm Pitch Horizontal SMT Connector)
Material Number: AFC10-S**QCA-00 (** indicates PIN count)
Version: 1 (1 version)
Page: 2 of 8
Product Overview
This product specification applies to the 1.0 series of connectors. It details the standard ratings, environmental characteristics, electrical characteristics, mechanical properties, and packaging requirements for the AFC10-S**QCA-00 model, a 1.0mm pitch horizontal SMT connector designed for various electronic applications.
Product Attributes
- Brand: (SHENZHEN JUSHUO ELECTRONIC CO.,LTD)
- Origin: China (implied by company address)
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specification | Test Method | Performance Requirement |
|---|---|---|---|
| Standard Rating | |||
| Rated Voltage | 50V | ||
| Rated Current | 0.5A AC/DC | ||
| Operating Temperature Range | -25+105 | ||
| Operating Humidity Range | Relative humidity is below 90% | ||
| Packaging, Transport, Storage | |||
| Packing | Inner packing is joint and several, outer packing is carton, product is sealed in the box, do not shake. | ||
| Transport Environment Temperature | -20 to +50 | ||
| Storage Environment Temperature | -20+50 | ||
| Storage Humidity | Not more than 90% | ||
| Storage Atmosphere | No acid, alkaline and other corrosive gases | ||
| Part Name/Material | |||
| Part Name | Model | Material | |
| Base | 1.0 LCP E130i | LCP | |
| Reed | 1.0 | Phosphor copper | |
| Stator | 1.0 | Phosphor copper | |
| Appearance | |||
| Plastic parts: no obvious scars, mottled, cracked, burr, flash, lack of material, or deformation affecting use. Metal parts: smooth, no rust, oxidation, peeling, blackening, or obvious mechanical damage. | |||
| Electrical Characteristics | |||
| Contact Resistance | 20m Max | Measure between two terminals of the connector after mating. | |
| Insulation Resistance | 100M Min | Apply 500V DC between adjacent contacts and between contacts and enclosure for 1 minute after mating. | |
| Withstand Voltage | No breakdown and flashover | Apply 500V AC between adjacent contacts and between contacts and enclosure for 1 minute after mating. | |
| Environmental Characteristics | |||
| Heating Test | Appearance: no damage. Contact resistance: 30m Max | Place mated connector in +1052 environment for 96H, then recover for 1-2H. | |
| Cold Tolerance Test | Appearance: no damage. Contact resistance: 30m Max | Place mated connector in -252 environment for 96H, then recover for 1-2H. | |
| Moisture Resistance Test | Appearance: no damage. Insulation resistance: 50M MIN. Withstand voltage: 200VAC/min | Place mated connector in 402, 90-96% RH environment for 96H, then recover for 1-2H. | |
| Temperature Cycle | Appearance: no abnormality. Contact resistance: 30m Max | 5 cycles: -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H). Recover for 2H. | |
| Salt Spray Test | Appearance: no damage or corrosion. Contact resistance: 30m Max | Continuous spray with 5%1% NaCl solution for 24H, wash with distilled water, recover for 1-2H. | |
| Weldability | Tin area above 95% | Dip the weldable part in 2355 tin solution for 2.50.5 seconds. | |
| Soldering Resistance | 1. Plastic parts: no obvious deformation, damage, or blistering. 2. Electrical characteristics must meet specifications. | Place connector on PCB and subject to 2605 reflow or wave soldering for 51S. | |
| Mechanical Properties | |||
| PIN Fixing Force | Single PIN: 7N Min | Apply force on pin front end at a rate of 253mm/min until pin withdraws. | |
| Terminal Retention in Plastic Parts | Single terminal: 5N Min | Pull terminal from socket at a rate of 253mm/min along conductor direction. | |
| Mechanical Life | Contact resistance: 30m Max | Plug and unplug 50 times at a speed of 10 times/min without power. | |
| Insert/Pull Force (N) | See table below | Mate and test on the same axis at 205mm/min. Remove hole seat lock during test. | |
| PIN Position | Insert (N) | Pull Out (N) | PIN Position | Insert (N) | Pull Out (N) |
|---|---|---|---|---|---|
| 1 | 3.00 | 0.50 | 9 | 29.00 | 5.50 |
| 2 | 8.00 | 2.00 | 10 | 32.00 | 6.00 |
| 3 | 11.00 | 2.50 | 11 | 35.00 | 6.50 |
| 4 | 14.00 | 3.00 | 12 | 38.00 | 7.00 |
| 5 | 17.00 | 3.50 | 13 | 41.00 | 7.50 |
| 6 | 20.00 | 4.00 | 14 | 44.00 | 8.00 |
| 7 | 23.00 | 4.50 | 15 | 47.00 | 8.50 |
| 8 | 26.00 | 5.00 | 16 | 50.00 | 9.00 |
2410121633_JUSHUO-AFC10-S14QCA-00_C2764193.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
