SMT connector horizontal 1.25mm pitch latch type JUSHUO GH125-S08DCA-00 rated 50 volts 1 amp AC DC
Manufacturer:
JUSHUO
Description:
Connector Header 8 position 1.25mm Pitch 1A Surface Mount, Right Angle -25℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
4.25mm
Reference Series:
GH
Pins Structure:
1x8P
Contact Plating:
锡
Contact Material:
磷青铜;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1.25mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
8
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
13.3mm
Z-Height Of The Board:
4.05mm
Mounting Type:
卧贴
Row Spacing:
-
Mfr. Part #:
GH125-S08DCA-00
Package:
SMD,P=1.25mm,Surface Mount,Right Angle
Model Number:
GH125-S08DCA-00
Introduction
Product Overview
This product acknowledgment document details the specifications for the 1.25mm pitch horizontal SMT connector with latch, model GH125-S**DCA-00. It outlines standard ratings, packaging, transportation, storage, component materials, appearance, electrical, environmental, and mechanical characteristics.
Product Attributes
- Brand: (SHENZHEN JUSHUO ELECTRONIC CO.,LTD)
- Origin: China
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specification | Details |
| Product Name | 1.25mm( | GH125-S**DCA-00 |
| Version | 1 1 version | Page 2 of 8 |
| Standard Rating | Rated Voltage | 50V |
| Standard Rating | Rated Current | 1.0A AC/DC |
| Standard Rating | Operating Temperature Range | -2585 |
| Standard Rating | Operating Humidity Range | Relative humidity is below 90% |
| Environmental Protection | Compliance | Products in line with ROHS environmental protection requirements. |
| Packaging | Inner/Outer | Inner packing is joint and several, outer packing is carton, sealed in the box, do not shake. |
| Transportation | Conditions | Avoid rain, snow, sunlight, collision, extrusion. Ambient temperature: -20 to +50. |
| Storage | Conditions | Ambient temperature: -20 to +50, relative humidity not more than 90%, no acid, alkaline, or corrosive gases. |
| Component Materials | Base | LCP E130i |
| Component Materials | Pin | Phosphor copper |
| Component Materials | Stator | Phosphor copper |
| Appearance | Plastic Parts | Free of obvious scars, mottled, cracked, burr, flash, lack of material, and deformation. |
| Appearance | Metal Parts | Smooth, clean, no rust, oxidation, peeling, blackening, or mechanical damage. |
| Electrical Characteristics | Contact Resistance | 20m Max (after mating) |
| Electrical Characteristics | Insulation Resistance | 500M Min (at 100V DC) |
| Electrical Characteristics | Withstand Voltage | No breakdown or flashover (at 500V AC) |
| Environmental Characteristics | Heating Test (+85) | Appearance: no damage. Contact Resistance: 60m Max. |
| Environmental Characteristics | Cold Test (-25) | Appearance: no damage. Contact Resistance: 60m Max. |
| Environmental Characteristics | Moisture Resistance (40, 90-96% RH) | Appearance: no damage. Insulation Resistance: 60M MIN. Withstand Voltage: 250V AC/minute MIN. |
| Environmental Characteristics | Temperature Cycle (-25 to +85, 5 cycles) | Appearance: no abnormality. Contact Resistance: 60m Max. |
| Environmental Characteristics | Salt Spray Test | Appearance: no damage or corrosion. Contact Resistance: 60m Max. |
| Environmental Characteristics | Weldability | Tin area 95% or more (at 2605 for 2.50.5s) |
| Environmental Characteristics | Soldering Resistance | No obvious deformation, damage, blistering of plastic parts. Electrical characteristics must meet specifications (at 2605). |
| Mechanical Properties | Pin Fixing Force | 5N Min per pin |
| Mechanical Properties | Terminal Retention in Plastic Parts | 7N Min per terminal |
| Mechanical Properties | Mechanical Life | Contact Resistance: 80m Max (after 30 cycles) |
| Mechanical Properties | Terminal Crimp Wire Strength | 26AWG: 17.8N; 28AWG: 8.9N; 30AWG: 4.4N; 32AWG: 2.2N |
| Mechanical Properties | Insertion Force | 2N (Per pin) |
| Mechanical Properties | Pullout Force | 0.3N (Per pin) |
2410121633_JUSHUO-GH125-S08DCA-00_C2886771.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
