JUSHUO AFC99 S24FIA HF Flexible Flat Cable Connector Flip Top Bottom Entry Locking Design 0.5mm Pitch
Manufacturer:
JUSHUO
Description:
Front insertion and back flip type -45℃~+85℃ 24P Bottom Contact 0.5mm SMD,P=0.5mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Locking Feature:
翻盖式(前插后翻)
Operating Temperature:
-45℃~+85℃
Number Of Contacts:
24P
Contact Type:
下接
FFC, FCB Thickness:
0.32mm
Pitch:
0.5mm
Mfr. Part #:
AFC99-S24FIA-HF
Package:
SMD,P=0.5mm,Surface Mount,Right Angle
Model Number:
AFC99-S24FIA-HF
Introduction
Product Overview
The AFC99-S**FIA-HF is a 0.5mm pitch FPC/FFC connector with a flip-top, bottom-entry design and a locking mechanism. It is designed for flexible flat cable connections and offers reliable electrical and mechanical performance.
Product Attributes
- Brand: JUSHUO ()
- Origin: Shenzhen, China
- Material: LCP (Main body, Housing Lock), Phosphor Bronze (Terminal, Contact)
- Color: Black (Housing Lock), Natural (Main body)
- Certifications: UL 94V-0
Technical Specifications
| Item | Specification | Test Condition | Requirement |
| 2. Product Name and Part Number | |||
| Product Name | FFC/FPC Flexible Flat Cable Connector | ||
| Part Number | AFC99-S**FIA-HF | ||
| 3. Ratings | |||
| Rated Voltage (MAX) | 50V | ||
| Rated Current (MAX) | [AC/DC (Virtual value) 50Hz] | 0.5A | |
| Ambient Temperature Range | -45 +85 | ||
| 4. Performance | |||
| 4.1 Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminal or ground. | No Breakdown | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. | Locking: 1.96*n (N) MAX Withdrawal: 0.49*n (N) MIN | |
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 253mm per minute. | 3.92N MIN | |
| 4.3 Environmental and Other Performance | |||
| Repeated Insertion and Withdrawal | Contact Resistance | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | 60 m MAX |
| Temperature Rise | Temperature Rise | Carrying rated current load. (UL 498) | 30 MAX |
| Vibration | Contact Resistance Discontinuity | DC 1mA energized state; Vibration along XYZ three directions; Amplitude: 1.5mm; Frequency: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes. | 60 m MAX 1 ms MAX. |
| Shock | Contact Resistance Discontinuity | DC 1mA energized state; Impact in 6 mutually perpendicular directions; 490m/s{50G}; 3 times each. | 60 m MAX 1 ms MAX. |
| Heat Resistance | Contact Resistance Appearance | Mate applicable FPC/FFC; Place in 852 air for 96 hours; then return to room temperature for 1-2 hours. | 60 m MAX No Damage |
| Cold Resistance | Contact Resistance Appearance | Mate applicable FPC/FFC; Place in -402 air for 96 hours; then return to room temperature for 1-2 hours. | 60 m MAX No Damage |
| Humidity | Contact Resistance Insulation Resistance Appearance | Mate applicable FPC/FFC; Place in 402, 90-95% relative humidity air for 96 hours; then measure within 0.5 hours after returning to room temperature. | 60 m MAX 20 M MIN No Damage |
| Temperature Cycling | Contact Resistance | 5 cycles of: 30 minutes at -452, 10-15 minutes at room temp/humidity, 30 minutes at 852, 10-15 minutes at room temp/humidity. | 60 m MAX |
| Salt Spray | Contact Resistance Appearance | 484 hours exposure to a salt spray from the 51% solution at 352. After test, wash with room temperature water and dry. | 60 m MAX No Damage, Corrosion |
| SO2 Gas | Contact Resistance Appearance | 24 hours exposure to 505ppm SO2 gas at 402. | 60 m MAX No Damage |
| NH3 Gas | Contact Resistance Appearance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | 60 m MAX No Damage |
| Solderability | Solder Wetting | Soldering Time: 20.5 sec. Soldering Temperature: 2355. 0.2 mm from terminal tip. | Wetting area 95% or more. |
| Resistance to Soldering Heat | Appearance | Soldering Time: 50.5 sec. Soldering Temperature: 2605. 0.2 mm from terminal tip. | No Damage, Deformation |
2507031705_JUSHUO-AFC99-S24FIA-HF_C49292207.pdf
Send RFQ
Stock:
MOQ:
