FPC Connector 1.0mm Pitch Double Sided Horizontal Mount with Height 285mm JUSHUO AFA10 S20ECA 00
Manufacturer:
JUSHUO
Description:
SMD,P=1mm,Surface Mount,Right Angle FFC, FPC (Flat Flexible) Connector Housings RoHS
Category:
FFC, FPC (Flat Flexible) Connector Assemblies/FFC, FPC (Flat Flexible) Connector Housings
Specifications
Mfr. Part #:
AFA10-S20ECA-00
Package:
SMD,P=1mm,Surface Mount,Right Angle
Model Number:
AFA10-S20ECA-00
Introduction
Product Overview
This document outlines the specifications for FPC/FFC connectors from SHENZHEN JUSHUO ELECTRONICS CO., LTD. These connectors are designed for 1.0mm pitch applications, featuring a double-sided, horizontal mount with a height of 2.85mm. They are suitable for various electronic applications requiring flexible flat cable connections.
Product Attributes
- Brand: JUSHUO ()
- Origin: Shenzhen, China
- Materials: LCP (Main body, Housing Lock), Phosphor Bronze (Terminal, Contact)
- Certifications: UL 94V-0 (for LCP materials)
Technical Specifications
| Item | Specification | Test Condition | Requirement |
| 2. Product Name and Part Number | |||
| Product Name | FFC/FPC Connector | ||
| Part Number | AFA10-S**ECA-00, AFA10-S**ECC-00 | ||
| Pitch | 1.0mm | ||
| 3. Ratings | |||
| Rated Voltage (MAX) | 125V | ||
| Rated Current (MAX) | AC/DC (Virtual value) 50Hz | 0.5A | |
| Ambient Temperature Range | -45 +85 | ||
| 4. Performance | |||
| 4.1 Electrical Performance | |||
| Contact Resistance | Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA. | 20 m MAX | |
| Insulation Resistance | Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. | No Breakdown | |
| 4.2 Mechanical Performance | |||
| Locking and Withdrawal Force | Insert and extract applicable FFC at the speed rate of 253mm/minute. (n=number of positions) | Locking: | 1.96*n (N) MAX |
| Withdrawal: | 0.49*n (N) MIN | ||
| Terminal/Housing Retention Force | Pull the terminal at the speed rate of 253mm per minute. | 3.92N MIN | |
| 4.3 Environmental Performance and Others | |||
| Repeated Insertion and Withdrawal | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | Contact Resistance: | 60 m MAX |
| Temperature Rise | Carrying rated current load. (UL 498) | Temperature Rise: | 30 MAX |
| Vibration | DC 1mA energized; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X, Y, Z axes. | Contact Resistance: | 60 m MAX |
| Discontinuity: | 1 ms MAX | ||
| Appearance: | No Damage | ||
| Shock | DC 1mA energized; 490m/s {50G}, 3 strokes in each X, Y, Z axes. | Discontinuity: | 1 ms MAX |
| Appearance: | No Damage | ||
| Heat Resistance | 852, 96 hours; then return to room temperature for 1-2 hours. | Contact Resistance: | 60 m MAX |
| Appearance: | No Damage | ||
| Cold Resistance | -402, 96 hours; then return to room temperature for 1-2 hours. | Contact Resistance: | 60 m MAX |
| Appearance: | No Damage | ||
| Humidity | 402, 90-95% RH, 96 hours; then measure within 0.5 hours at room temperature. | Contact Resistance: | 60 m MAX |
| Insulation Resistance: | 20 M MIN | ||
| Appearance: | No Damage | ||
| Temperature Cycling | 5 cycles of: a) -452 for 30 minutes; b) 852 for 30 minutes; with 10-15 minutes at room temperature between cycles. | Contact Resistance: | 60 m MAX |
| Appearance: | No Damage, No Corrosion | ||
| Salt Spray | 484 hours exposure to a salt spray from a 51% solution at 352. Washed with water and dried at room temperature after test. | Contact Resistance: | 60 m MAX |
| SO2 Gas | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: | 60 m MAX |
| Appearance: | No Damage | ||
| NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Contact Resistance: | 60 m MAX |
| Solderability | Soldering Time: 20.5 sec. Soldering Temperature: 2355. 0.2 mm from terminal tip. | Solder Wetting: | 95% coverage |
| Resistance to Soldering Heat | Soldering Time: 50.5 sec. Soldering Temperature: 2605. 0.2 mm from terminal tip. | Appearance: | No Damage, No Deformation |
2512171500_JUSHUO-AFA10-S20ECA-00_C53190728.pdf
Send RFQ
Stock:
MOQ:
