125mm pitch wafer patch socket connector JUSHUO GH125-S04CCA-00 for FPC and FFC connection solutions
Manufacturer:
JUSHUO
Description:
Connector Header 4 position 1.25mm Pitch 1A Surface Mount,Vertical -25℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
4.25mm
Reference Series:
GH
Pins Structure:
1x4P
Contact Plating:
锡
Contact Material:
磷青铜;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1.25mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
4
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
8.3mm
Z-Height Of The Board:
4.05mm
Row Spacing:
-
Mounting Type:
立贴
Mfr. Part #:
GH125-S04CCA-00
Package:
SMD,P=1.25mm
Model Number:
GH125-S04CCA-00
Introduction
SHENZHEN JUSHUO ELECTRONICS CO.,LTD - GH125-S**CCA-00 WAFER Patch Socket
The GH125-S**CCA-00 is a 1.25mm pitch wafer patch socket connector designed for FPC/FFC applications. It offers reliable electrical and mechanical performance, adhering to ROHS environmental requirements.
Product Attributes
- Brand: JUSHUO
- Origin: Shenzhen, China
- Material: LCP (Base), Phosphor copper (Pin, Stator)
- Certifications: ROHS
Technical Specifications
| Item | Specification | Condition | Requirement |
|---|---|---|---|
| 2. Product Name and Part Number | |||
| Product Name | WAFER | ||
| Part Number | GH125-S**CCA-00 | ||
| 3. Ratings | |||
| Rated Voltage (MAX) | 50V | ||
| Rated Current (MAX) | 1A [AC/DC (Virtual value) 50Hz] | ||
| Ambient temperature Range | -45 +85 | (Including terminal temperature rise) | |
| 6. Performance | |||
| 6.1 Electrical Performance | |||
| Contact Resistance | Plug in the connector and test with a contact resistance meter to measure both terminals of the connector form a closed loop between. | 20 m MAX | |
| Insulation Resistance | Plug in the connector and apply 500V DC voltage between the adjacent contacts and between the contacts and the enclosure for 1 minute. | 500M MIN | |
| Dielectric Strength | Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground. | No Breakdown | |
| 6.2 Mechanical Performance | |||
| Pin fixing force | Fix the pin holder on the drawing machine and apply force on the front end of the pin at a rate of 253mm per minute until the pin is withdrawn from the pin holder. | Single pin | 5N MIN |
| Terminal Retention in Plastic parts | The terminal shall be matched with the hole seat, and at the rate of 253mm per minute along the conductor direction, the force that the terminal is pulled out of the socket. | Single terminal | 5N MIN |
| 6.3 Environmental Performance | |||
| Heat Resistance | Place the connector in an environment of +852 for 96H, take it out and test after 1-2H in normal environment. | 852, 96 hour | Appearance: No Damage; Contact Resistance: 30 m MAX |
| Cold Resistance | Place the connector in an environment of -452 for 96H, take it out and test after 1-2H in normal environment. | -452, 96 hour | Appearance: No Damage; Contact Resistance: 30 m MAX |
| Humidity | Place the connector in an environment of 452, relative humidity 90~96% for 96H. After the test, take it out and test after 1~2H in normal environment. | Temperature: 452 Relative Humidity: 90-96% Duration: 96 Hours | Appearance: No Damage; Insulation Resistance: 30M MIN; Dielectric Strength: 500V AC/MIN |
| Temperature Cycling | Test samples are placed in a high and low temperature test chamber and adjusted according to the following steps: a) Maintain at -453 for 30 minutes; b) Maintain at normal temperature and humidity for 1H; c) Maintain at 853 for 30 minutes; d) Maintain at normal temperature and humidity for 1H; a to d is one cycle, a total of 5 cycles. Recover in normal environment for 2H before inspection. | a)-453 30minutes; b)Normal temp/humidity 1H; c)853 30minutes; d)Normal temp/humidity 1H, 5 cycles. | Appearance: No Damage; Contact Resistance: 60 m MAX |
| Salt Spray Resistance | Test samples are suspended from the top of the test chamber; 48 hours of exposure to a salt spray from a 5 1% solution at 452. After the test, rinse with water at room temperature and then dry at room temperature. | 48 hours exposure to a salt spray from the 5 1% solution at 452. | Appearance: No Damage, Corrosion |
| Salt Spray Resistance | Test samples are suspended from the top of the test chamber; 484 hours of exposure to a salt spray from a 51% solution at 452. After the test, rinse with water at room temperature and then dry at room temperature. | 484 hours exposure to a salt spray from the 51% solution at 452. | Appearance: No Damage; Contact Resistance: 30 m MAX |
| Solder Ability | Immerse the sample's soldering surface into a tin bath at 2455 for 2.50.5 sec. | Soldering Time: 2.50.5 sec. Soldering Temperature: 2455 0.2 mm from terminal tip. | Tin Area: Above 95% |
| Soldering Resistance | Place the connector on a PCB board and immerse it into a tin bath at 2605 for 50.5 sec. | Soldering Time: 50.5 sec. Soldering Temperature: 2605 0.2 mm from terminal tip. | Appearance: No Damage, Deformation; Tin Area: Above 95% |
| 7. Appearance and Size | |||
| Appearance | The surface of plastic parts shall be free of obvious scars, mottled, cracked, burr, flash, lack of material and deformation affecting the use; the surface of metal parts shall be smooth and clean, no rust, oxidation, peeling, blackening and obvious mechanical damage. | ||
| Size | Refer to engineering drawing | ||
2504101957_JUSHUO-GH125-S04CCA-00_C2886782.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
