1.25mm Pitch Horizontal SMT Connector with Latch JUSHUO GH125-S10DCA-00 Rated Voltage 50V Current 1A
Manufacturer:
JUSHUO
Description:
Connector Header 10 position 1.25mm Pitch 1A Surface Mount, Right Angle -25℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
4.25mm
Pins Structure:
1x10P
Reference Series:
GH
Contact Plating:
锡
Contact Material:
磷青铜;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1.25mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
10
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
15.8mm
Z-Height Of The Board:
4.05mm
Mounting Type:
卧贴
Row Spacing:
-
Mfr. Part #:
GH125-S10DCA-00
Package:
SMD,P=1.25mm,Surface Mount,Right Angle
Model Number:
GH125-S10DCA-00
Introduction
Product Overview
This product acknowledgement document details the specifications for the 1.25mm pitch horizontal SMT connector with a latch, model GH125-S**DCA-00. It outlines standard ratings, packaging, transport, storage, component materials, appearance, electrical, environmental, and mechanical characteristics.
Product Attributes
- Brand: (SHENZHEN JUSHUO ELECTRONIC CO.,LTD)
- Origin: China
- Certifications: ROHS
Technical Specifications
| Item | Specification | Details | |
| Product Name | 1.25mm Pitch Horizontal SMT Connector (with Latch) | GH125-S**DCA-00 (** indicates PIN count) | |
| Version | 1 | Page 1 of 8 | |
| Standard Rating | Rated Voltage | 50V | |
| Standard Rating | Rated Current | 1.0A AC/DC | |
| Standard Rating | Operating Temperature Range | -2585 | |
| Standard Rating | Operating Humidity Range | Below 90% RH | |
| Environmental Protection | Complies with ROHS environmental requirements. | ||
| Packaging | Inner packaging is joint and several, outer packaging is carton. Product sealed in box, no shaking. | ||
| Transport | Allowed by any means, avoid rain/snow/sunlight, no collision/extrusion. Transport temperature: -20 to +50. | ||
| Storage | Store in warehouse with temperature -20+50, RH 90%, free from corrosive gases. | ||
| Component: Base | Material | LCP E130i | |
| Component: Pin | Material | Phosphor Copper | |
| Component: Stator | Material | Phosphor Copper | |
| Appearance | Plastic parts: no obvious scars, mottled, cracked, burr, flash, material deficiency, or deformation. Metal parts: smooth, no rust, oxidation, peeling, blackening, or mechanical damage. | ||
| Electrical: Contact Resistance | Test Method | Plugged connector tested with contact resistance meter. | 20m Max |
| Electrical: Insulation Resistance | Test Method | Apply 100V DC between adjacent contacts and between contacts and enclosure for 1 minute. | 500M Min |
| Electrical: Withstand Voltage | Test Method | Apply 500V AC between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown or flashover. |
| Environmental: Heat Test | Condition | +852 for 96H, then 1-2H at normal temp. | Appearance: No damage. Contact Resistance: 60m Max. |
| Environmental: Cold Test | Condition | -252 for 96H, then 1-2H at normal temp. | Appearance: No damage. Contact Resistance: 60m Max. |
| Environmental: Moisture Resistance | Condition | 402, 90-96% RH for 96H, then 1-2H at normal temp. | Appearance: No damage. Insulation Resistance: 60M Min. Withstand Voltage: 250V AC/min MIN. |
| Environmental: Temperature Cycle | Condition | 5 cycles of -25 (30min) -> Room Temp (1H) -> +85 (30min) -> Room Temp (1H). Recover 2H. | Appearance: No abnormality. Contact Resistance: 60m Max. |
| Environmental: Salt Spray Test | Condition | 5% NaCl solution, 24H spray. Wash with distilled water, recover 1-2H. | Appearance: No damage/corrosion. Contact Resistance: 60m Max. |
| Environmental: Solderability | Condition | Dip in 2605 tin solution for 2.50.5 seconds. | Tin coverage 95%. |
| Environmental: Soldering Resistance | Condition | Reflow or wave soldering at 2605 for 51S. | Plastic parts: no obvious deformation/damage/blistering. Electrical characteristics must meet specifications. |
| Mechanical: Pin Fixing Force | Rate | 253mm/min | 5N Min (per pin) |
| Mechanical: Terminal Retention | Rate | 253mm/min | 7N Min (per terminal) |
| Mechanical: Mechanical Life | Cycles | 30 cycles at 10 cycles/min | Contact Resistance: 80m Max. |
| Mechanical: Terminal Crimp Wire Strength | Rate | 253mm/min | 26AWG: 17.8N; 28AWG: 8.9N; 30AWG: 4.4N; 32AWG: 2.2N. |
| Mechanical: Insertion/Extraction Force | Rate | 205mm/min | Insertion: 2N (per pin); Extraction: 0.3N (per pin). Remove hole seat lock. |
2410121633_JUSHUO-GH125-S10DCA-00_C2886773.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
