2.0mm Pitch Vertical SMT Connector JUSHUO AFC20-S15BCA-00 Operating Temperature Minus 25 to Plus 105
Manufacturer:
JUSHUO
Description:
Connector Header 15 position 2mm Pitch 2A Surface Mount,Vertical -20℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
5.45mm
Pins Structure:
1x15P
Reference Series:
PH
Contact Plating:
锡
Contact Material:
黄铜;LCP
Operating Temperature:
-20℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
2mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
15
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
33.9mm
Z-Height Of The Board:
6.7mm
Row Spacing:
-
Mounting Type:
立贴
Mfr. Part #:
AFC20-S15BCA-00
Package:
SMD,P=2mm
Model Number:
AFC20-S15BCA-00
Introduction
Product Overview
This product is a 2.0mm pitch vertical SMT connector (AFC20-S**BCA-00) designed for various applications. It meets ROHS environmental protection requirements and is suitable for use within a temperature range of -25 to +105 and a humidity range below 90% relative humidity. The connector is packaged to prevent movement and damage during transport and storage.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: China
- Material: Base: LCP E130i, Pin: Brass, Stator: Brass
- Certifications: ROHS
Technical Specifications
| Project | Specification | Test Method | Performance Requirement |
| Standard Rating | |||
| Rated Voltage | 250V AC/DC | ||
| Rated Current | 2.0A | ||
| Operating Temperature Range | -25+105 | ||
| Operating Humidity Range | Below 90% RH | ||
| Electrical Characteristics | |||
| Contact Resistance | Plugged connector, measured with contact resistance meter. | 20m Max | |
| Insulation Resistance | Plugged connector, 1000V DC applied between adjacent contacts and between contacts and enclosure for 1 min. | 1000M Min | |
| Withstand Voltage | Plugged connector, 1000V AC applied between adjacent contacts and between contacts and enclosure for 1 min. | No breakdown and flashover | |
| Environmental Characteristics | |||
| Heating Test | Plugged connector in +1052 for 96H, then 1-2H at normal temp. | Appearance: No damage; Contact Resistance: 30m Max | |
| Cold Tolerance Test | Plugged connector in -252 for 96H, then 1-2H at normal temp. | Appearance: No damage; Contact Resistance: 30m Max | |
| Moisture Resistance Test | Plugged connector in 402, 90-96% RH for 96H, then 1-2H at normal temp. | Appearance: No damage; Insulation Resistance: 500M Min; Withstand Voltage: 600V AC/min MIN | |
| Temperature Cycle | 5 cycles of -253 (30min), Room Temp (1H), +1053 (30min), Room Temp (1H), recovery 2H. | Appearance: No abnormality; Contact Resistance: 30m Max | |
| Salt Spray Test | Continuous spray with 51% NaCl solution for 24H, wash with distilled water, recover 1-2H. | Appearance: No damage/corrosion; Contact Resistance: 30m Max | |
| Weldability | Dip in 2455 tin solution for 2.50.5 sec. | Tin coverage 95% | |
| Soldering Resistance | Place on PCB, subjected to 2605 reflow or wave soldering for 51 sec. | 1. Plastic parts: No obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | |
| Mechanical Properties | |||
| PIN Fixing Force | Apply force at pin front end at 253mm/min rate until pin withdraws. | Single PIN: 10N Min | |
| Terminal Retention in Plastic Parts | Pull terminal from socket at 253mm/min rate along conductor direction. | Single terminal: 7N Min | |
| Mechanical Life | Plug and unplug 50 times at 10 times/min without power. | Contact Resistance: 30m Max | |
| Insertion/Extraction Force | Fit socket and terminal, insert/extract on same axis (speed: 205mm/min), remove socket lock. | See detailed table below | |
| Insertion/Extraction Force (N) | |||||
| Position | Insert | Pull Out | Position | Insert | Pull Out |
| 1 | 4.00 | 1.50 | 9 | 52.00 | 16.50 |
| 2 | 24.00 | 6.00 | 10 | 56.00 | 18.00 |
| 3 | 28.00 | 7.50 | 11 | 60.00 | 19.50 |
| 4 | 32.00 | 9.00 | 12 | 64.00 | 21.00 |
| 5 | 36.00 | 10.50 | 13 | 68.00 | 22.50 |
| 6 | 40.00 | 12.00 | 14 | 72.00 | 24.00 |
| 7 | 44.00 | 13.50 | 15 | 76.00 | 25.50 |
| 8 | 48.00 | 15.00 | 16 | 80.00 | 27.00 |
2410121633_JUSHUO-AFC20-S15BCA-00_C2764239.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
