SMT Connector Horizontal 1.25mm Pitch with Latch JUSHUO GH125-S13DCA-00 Rated Voltage 50V and Current 1A
Manufacturer:
JUSHUO
Description:
Connector Header 13 position 1.25mm Pitch 1A Surface Mount, Right Angle -25℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
4.25mm
Pins Structure:
1x13P
Reference Series:
GH
Contact Plating:
锡
Contact Material:
磷青铜;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1.25mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
13
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
19.55mm
Z-Height Of The Board:
4.05mm
Mounting Type:
卧贴
Row Spacing:
-
Mfr. Part #:
GH125-S13DCA-00
Package:
SMD,P=1.25mm,Surface Mount,Right Angle
Model Number:
GH125-S13DCA-00
Introduction
Product Overview
This product acknowledgment document details the specifications for the 1.25mm pitch horizontal SMT connector with latch, model GH125-S**DCA-00. It covers standard ratings, environmental characteristics, electrical and mechanical properties, as well as packaging, transport, and storage guidelines. This specification is applicable to the GH series products.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specifications | Test Method | Performance Requirements |
| Standard Rating | |||
| Rated voltage | 50V | ||
| Rated current | 1.0A AC/DC | ||
| Operating temperature range | -2585 | ||
| Operating humidity range | Relative humidity is below 90% | ||
| Environmental Protection | |||
| Compliance | Products in line with ROHS environmental protection requirements. | ||
| Packing | |||
| Inner/Outer Packing | Inner packing is joint and several, outer packing is carton, product is sealed in the box, do not shake. | ||
| Transport | |||
| Conditions | Allowed by any means, avoid rain, snow, sunlight, collision, extrusion. Ambient temperature: -20 to +50. | ||
| Storage | |||
| Conditions | Ambient temperature: -20 to +50, relative humidity 90%, no acid, alkaline, or other corrosive gases. | ||
| Part Name/Material | |||
| Base | GH LCP E130i | ||
| Pin | GH Phosphor copper | ||
| Stator | GH Phosphor copper | ||
| Electrical Characteristics | |||
| Contact Resistance | Plug in connector, test with contact resistance meter. | 20m Max | |
| Insulation Resistance | Apply 100V DC between adjacent contacts and between contacts and enclosure for 1 minute. | 500M Min | |
| Withstand Voltage | Apply 500V AC between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover | |
| Environmental Characteristics | |||
| Heating Test (+852, 96H) | Appearance: No damage. Contact Resistance: 60m Max. | ||
| Cold Test (-252, 96H) | Appearance: No damage. Contact Resistance: 60m Max. | ||
| Moisture Resistance (402, 90-96% RH, 96H) | Appearance: No damage. Insulation Resistance: 60M Min. Withstand Voltage: 250V AC/minute MIN. | ||
| Temperature Cycle (-25 to +85, 5 cycles) | Appearance: No abnormalities. Contact Resistance: 60m Max. | ||
| Salt Spray Test (51% NaCl, 24H) | Appearance: No damage, corrosion. Contact Resistance: 60m Max. | ||
| Weldability | Dip in 2605 tin solution for 2.50.5 seconds. | Tin area 95% | |
| Soldering Resistance (2605 reflow/wave soldering, 51S) | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | ||
| Mechanical Properties | |||
| Pin Fixing Force | Apply force on pin front end at 253mm/min rate until pin withdraws. | Single pin 5N Min | |
| Terminal Retention in Plastic Parts | Pullout force along wire direction at 253mm/min rate. | Single terminal: 7N Min | |
| Mechanical Life (30 cycles, 10 cycles/min) | Under no power on state. | Contact resistance: 80m Max | |
| Terminal Crimp Wire Strength | Axial pullout force at 253mm/min rate. | 26AWG: 17.8N; 28AWG: 8.9N; 30AWG: 4.4N; 32AWG: 2.2N | |
| Insertion/Pullout Force | Fit hole seat and terminal, test insertion/removal on same axis. Remove lock of hole seat. Test speed: 205mm/min. | Insertion force: 2N(Per pin); Pullout force: 0.3N(Per pin) | |
2410121633_JUSHUO-GH125-S13DCA-00_C2886776.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
