Durable Electrical Connector JUSHUO GH125-S14CCA-00 1.25mm Pitch Horizontal SMT Connector with Latch
Manufacturer:
JUSHUO
Description:
Connector Header 14 position 1.25mm Pitch 1A Surface Mount,Vertical -25℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
4.25mm
Pins Structure:
1x14P
Reference Series:
GH
Contact Plating:
锡
Contact Material:
磷青铜;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1.25mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
14
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
20.8mm
Z-Height Of The Board:
4.05mm
Row Spacing:
-
Mounting Type:
立贴
Mfr. Part #:
GH125-S14CCA-00
Package:
SMD,P=1.25mm
Model Number:
GH125-S14CCA-00
Introduction
Product Overview
This Product Acknowledgement document details the specifications for the 1.25mm pitch horizontal SMT connector with latch, model GH125-S**DCA-00. It covers standard ratings, packaging, transportation, storage, component materials, appearance, electrical, environmental, and mechanical characteristics. The product conforms to ROHS environmental requirements and is designed for various applications requiring reliable electrical connections.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: China
- Certifications: ROHS
Technical Specifications
| Item | Specifications | Test Method | Performance Requirements |
| Standard Rating | |||
| Rated Voltage | 50V | ||
| Rated Current | 1.0A AC/DC | ||
| Operating Temperature Range | -2585 | ||
| Operating Humidity Range | Below 90% Relative Humidity | ||
| Component Materials | |||
| Part Name | Model | Material | |
| Base | GH | LCP E130i | |
| Pin | GH | Phosphor Copper | |
| Stator | GH | Phosphor Copper | |
| Electrical Characteristics | |||
| Contact Resistance | Plug in the connector and test with a contact resistance meter. | 20m Max | |
| Insulation Resistance | Apply 100V DC between adjacent contacts and between contacts and enclosure for 1 minute. | 500M Min | |
| Withstand Voltage | Apply 500V AC between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover | |
| Environmental Characteristics | |||
| Heating Test | Appearance: No damage. Contact resistance: 60m Max. | Place plug connector in +852 environment for 96H, then test after 1-2H recovery. | |
| Cold Tolerance Test | Appearance: No damage. Contact resistance: 60m Max. | Place plug connector in -252 environment for 96H, then test after 1-2H recovery. | |
| Moisture Resistance Test | Appearance: No damage. Insulation resistance: 60M Min. Withstand voltage: 250V AC/minute MIN. | Place plug connector in 402, 90-96% RH environment for 96H, then test after 1-2H recovery. | |
| Temperature Cycle | Appearance: No abnormalities. Contact resistance: 60m Max. | 5 cycles of -253 (30 min) -> Room Temp (1H) -> +853 (30 min) -> Room Temp (1H), then 2H recovery. | |
| Salt Spray Test | Appearance: No damage or corrosion. Contact resistance: 60m Max. | Continuous spray with 51% NaCl solution for 24H, then wash and recover for 1-2H. | |
| Weldability | Tin area: Above 95%. | Dip the weldable part into 2605 tin solution for 2.50.5 seconds. | |
| Soldering Resistance | 1. Plastic parts: No obvious deformation, damage, or blistering. 2. Electrical characteristics must meet specifications. | Reflow or wave soldering at 2605 for 51S. | |
| Mechanical Properties | |||
| Pin Fixing Force | Single pin: 5N min | Apply force at the front end of the pin at a rate of 253mm/min until withdrawn. | |
| Terminal Retention in Plastic Parts | Single terminal: 7N min | Pull terminal out of socket at a rate of 253mm/min along conductor direction. | |
| Mechanical Life | Contact resistance: 80m Max. | Plug and unplug 30 times at a speed of 10 times/min without power. | |
| Terminal Crimp Wire Strength | 26AWG wire: 17.8N. 28AWG wire: 8.9N. 30AWG wire: 4.4N. 32AWG wire: 2.2N. | Axial pullout force at 253mm/min. | |
| Insertion/Pullout Force | Insertion force: 2N(Per pin). Pullout force: 0.3N(Per pin). | Fit hole seat and terminal, test insertion/removal on the same axis. Remove hole seat lock. Test speed: 205mm/min. | |
2410121633_JUSHUO-GH125-S14CCA-00_C2886792.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
