1.25mm Pitch Vertical SMT Connector with Latch JUSHUO GH125-S03CCA-00 Featuring Phosphor Copper Pins
Manufacturer:
JUSHUO
Description:
Connector Header 3 position 1.25mm Pitch 1A Surface Mount,Vertical -25℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
4.25mm
Pins Structure:
1x3P
Reference Series:
GH
Contact Plating:
锡
Contact Material:
磷青铜;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1.25mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
3
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
7.05mm
Z-Height Of The Board:
4.05mm
Row Spacing:
-
Mounting Type:
立贴
Mfr. Part #:
GH125-S03CCA-00
Package:
SMD,P=1.25mm
Model Number:
GH125-S03CCA-00
Introduction
Product Overview
This document is a product acknowledgment for the 1.25mm Pitch Vertical SMT Connector (with Latch), model GH125-S**CCA-00, manufactured by SHENZHEN JUSHUO ELECTRONIC CO.,LTD. It details the product's specifications, electrical and mechanical characteristics, and environmental performance.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: China
- Certifications: ROHS compliant
Technical Specifications
| Item | Specifications | Test Method | Performance Requirements |
| 2. Standard Rating | |||
| Rated Voltage | 50V | ||
| Rated Current | 1.0A AC/DC | ||
| Operating Temperature Range | -2585 | ||
| Operating Humidity Range | Below 90% Relative Humidity | ||
| 7. Part Name/Material | |||
| Part Name | Model | Material | |
| Base | GH LCP E130i | LCP | |
| Pin | GH Phosphor Copper | Phosphor Copper | |
| Stator | GH Phosphor Copper | Phosphor Copper | |
| 9. Electrical Characteristics | |||
| Contact Resistance | Plug in the connector and test with a contact resistance meter. | 20m Max | |
| Insulation Resistance | Plug in the connector and apply 100V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | 500M Min | |
| Withstand Voltage | Plug in the connector and apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover | |
| 10. Environmental Characteristics | |||
| Heating Test | Place plug connector in +852 environment for 96H, then recover in normal environment for 1-2H. | Appearance: No damage; Contact Resistance: 60m Max | |
| Cold Tolerance Test | Place plug connector in -252 environment for 96H, then recover in normal environment for 1-2H. | Appearance: No damage; Contact Resistance: 60m Max | |
| Moisture Resistance Test | Place plug connector in 402, 90-96% RH environment for 96H, then recover in normal environment for 1-2H. | Appearance: No damage; Insulation Resistance: 60M Min; Withstand Voltage: 250V AC/minute MIN | |
| Temperature Cycle | 5 cycles of -253 (30min) -> Room Temp (1H) -> +853 (30min) -> Room Temp (1H), then recover for 2H. | Appearance: No abnormalities; Contact Resistance: 60m Max | |
| Salt Spray Test | Continuous spray with 5%1% NaCl solution for 24H, wash with distilled water, recover for 1-2H. | Appearance: No damage or corrosion; Contact Resistance: 60m Max | |
| Weldability | Dip in 2605 tin solution for 2.50.5 seconds. | Tin area above 95% | |
| Soldering Resistance | Place connector on PCB and subject to 2605 reflow or wave soldering for 51S. | 1. Plastic parts: No obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | |
| 11. Mechanical Properties | |||
| Pin Fixing Force | Apply force at a rate of 253mm/min. | Single Pin: 5N Min | |
| Terminal Retention in Plastic Parts | Pull terminal from socket at a rate of 253mm/min along conductor direction. | Single Terminal: 7N Min | |
| Mechanical Life | Plug and unplug 30 times at a speed of 10 times/min without power. | Contact Resistance: 80m Max | |
| Terminal Crimp Wire Strength | Axial pullout force at a rate of 253mm/min. | 26AWG Wire: 17.8N; 28AWG Wire: 8.9N; 30AWG Wire: 4.4N; 32AWG Wire: 2.2N | |
| Insertion/Pull-out Force | Fit hole seat and terminal, test insertion/removal on the same axis, remove lock of hole seat (test speed: 205mm/min). | Insertion Force: 2N (Per pin); Pull-out Force: 0.3N (Per pin) | |
2410121633_JUSHUO-GH125-S03CCA-00_C2886781.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
