2 Amp Rated Horizontal SMT Connector JUSHUO AFC20-S09ACA-00 2.0 Millimeter Pitch Electrical Component
Manufacturer:
JUSHUO
Description:
Connector Header 9 position 2mm Pitch 2A Surface Mount, Right Angle -20℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
7.55mm
Pins Structure:
1x9P
Reference Series:
PH
Contact Plating:
锡
Contact Material:
黄铜;LCP
Operating Temperature:
-20℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
2mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
9
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
21.9mm
Z-Height Of The Board:
5.55mm
Mounting Type:
卧贴
Row Spacing:
-
Mfr. Part #:
AFC20-S09ACA-00
Package:
SMD,P=2mm,Surface Mount,Right Angle
Model Number:
AFC20-S09ACA-00
Introduction
Product Overview
This product acknowledgment document pertains to the 2.0mm pitch horizontal SMT connector, model AFC20-S**ACA-00. It outlines the product's specifications, environmental characteristics, and mechanical properties, ensuring compliance with industry standards and customer requirements.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specifications | Test Method | Performance Requirements |
| 2. Standard Rating | |||
| Rated voltage | 250V AC/DC | ||
| Rated current | 2.0A | ||
| Operating temperature range | -25+105 | ||
| Operating humidity range | Relative humidity is below 90% | ||
| 7. Part Name/Part Specification/Part Material | |||
| Part Name | Model | Material | |
| Base | 2.0 LCP E130i | ||
| Pin | 2.0 Brass | ||
| Stator | 2.0 Brass | ||
| 9. Electrical Characteristics | |||
| Contact resistance | Plug in the connector and test with a contact resistance meter. | 20m Max | |
| Insulation resistance | Apply 1000V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | 1000M Min | |
| Withstand voltage | Apply 1000V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover | |
| 10. Environmental Characteristics | |||
| Heating test | Place plug connector in +1052 environment for 96H, then test after 1~2H in normal environment. | Appearance: no damage; Contact resistance: 30m Max | |
| Cold tolerance test | Place plug connector in -252 environment for 96H, then test after 1~2H in normal environment. | Appearance: no damage; Contact resistance: 30m Max | |
| Moisture resistance test | Place plug connector in 402, 90~96% RH environment for 96H, then test after 1~2H in normal environment. | Appearance: no damage; Insulation resistance: 500M Min; Withstand voltage: 600V AC/minute MIN | |
| Temperature cycle | 5 cycles of -253 (30min) -> Room temp (1H) -> +1053 (30min) -> Room temp (1H), recover 2H. | Appearance: no abnormality; Contact resistance: 30m Max | |
| Salt Spray Test | Continuous spray with 51% NaCl solution for 24H, wash with distilled water, recover 1~2H. | Appearance: no damage, corrosion; Contact resistance: 30m Max | |
| Weldability | Dip in 2455 tin solution for 2.50.5 seconds. | Tin area above 95% | |
| Soldering resistance | Reflow or wave soldering at 2605 for 51S. | 1. Plastic parts free from deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | |
| 11. Mechanical Properties | |||
| PIN needle fixing force | Apply force at a rate of 253mm/min until pin withdraws. | Single pin: 10N Min | |
| Terminal retention in plastic parts | Pull terminal out of socket at a rate of 253mm/min along conductor direction. | Single terminal: 7N Min | |
| Mechanical life | Plug and unplug 50 times at 10 times/min under no power. | Contact resistance: 30m Max | |
| Insertion/Pull-out force | Fit socket and terminal, test insertion/removal on the same axis (speed: 205mm/min), remove socket lock. | See detailed table below. | |
| Hole Position | Insertion (N) | Pull out (N) | Hole Position | Insertion (N) | Pull out (N) |
| 1 | 4.00 | 1.50 | 9 | 52.00 | 16.50 |
| 2 | 24.00 | 6.00 | 10 | 56.00 | 18.00 |
| 3 | 28.00 | 7.50 | 11 | 60.00 | 19.50 |
| 4 | 32.00 | 9.00 | 12 | 64.00 | 21.00 |
| 5 | 36.00 | 10.50 | 13 | 68.00 | 22.50 |
| 6 | 40.00 | 12.00 | 14 | 72.00 | 24.00 |
| 7 | 44.00 | 13.50 | 15 | 76.00 | 25.50 |
| 8 | 48.00 | 15.00 | 16 | 80.00 | 27.00 |
2410121633_JUSHUO-AFC20-S09ACA-00_C2764218.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
