Durable 1.25mm Pitch Vertical SMT Connector JUSHUO GH125-S16CCA-00 Featuring Secure Latch Design
Manufacturer:
JUSHUO
Description:
Connector Header 16 position 1.25mm Pitch 1A Surface Mount,Vertical -25℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
4.25mm
Reference Series:
GH
Pins Structure:
1x16P
Contact Plating:
锡
Contact Material:
磷青铜;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1.25mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
16
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
23.3mm
Z-Height Of The Board:
4.05mm
Row Spacing:
-
Mounting Type:
立贴
Mfr. Part #:
GH125-S16CCA-00
Package:
SMD,P=1.25mm
Model Number:
GH125-S16CCA-00
Introduction
Product Overview
This document outlines the specifications for the 1.25mm pitch vertical SMT connector with latch, model GH125-S**CCA-00. It details product confirmation, technical characteristics, and mechanical properties.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: Shenzhen, China
- Certifications: ROHS
Technical Specifications
| Item | Specifications | Test Method | Performance Requirements |
|---|---|---|---|
| Standard Rating | |||
| Rated Voltage | 50V | ||
| Rated Current | 1.0A AC/DC | ||
| Operating Temperature Range | -2585 | ||
| Operating Humidity Range | Relative humidity is below 90% | ||
| Environmental Protection | |||
| Compliance | Products in line with ROHS environmental protection requirements. | ||
| Packing | |||
| Method | Inner packing is joint and several, outer packing is carton. Products sealed in the box, do not shake. | ||
| Transport | |||
| Conditions | Avoid rain, snow and sunlight. No mechanical damage such as collision and extrusion. Ambient temperature: -20 to +50. | ||
| Storage | |||
| Conditions | Ambient temperature: -20 to +50. Relative humidity not more than 90%. No acid, alkaline, and other corrosive gases. | ||
| Part Name/Material | |||
| Part Name | Model | Material | |
| Base | GH LCP E130i | ||
| Pin | GH Phosphor copper | ||
| Stator | GH Phosphor copper | ||
| Electrical Characteristics | |||
| Contact Resistance | Plug in the connector and test with a contact resistance meter. | 20m Max | |
| Insulation Resistance | Apply 100V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | 500M Min | |
| Withstand Voltage | Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover | |
| Environmental Characteristics | |||
| Heating Test | Place plugged connector in +852 environment for 96H, then in normal environment for 1-2H. | Appearance: No damage. Contact Resistance: 60m Max | |
| Cold Tolerance Test | Place plugged connector in -252 environment for 96H, then in normal environment for 1-2H. | Appearance: No damage. Contact Resistance: 60m Max | |
| Moisture Resistance Test | Place plugged connector in 402, 90-96% RH environment for 96H, then in normal environment for 1-2H. | Appearance: No damage. Insulation Resistance: 60M Min. Withstand Voltage: 250V AC/minute MIN | |
| Temperature Cycle | Test samples cycled between -253 (30 min), room temp (1H), +853 (30 min), room temp (1H) for 5 cycles. Recover for 2H. | Appearance: No abnormalities. Contact Resistance: 60m Max | |
| Salt Spray Test | Continuous spray with 51% NaCl solution for 24H. Wash with distilled water, recover for 1-2H. | Appearance: No damage or corrosion. Contact Resistance: 60m Max | |
| Weldability | Dip weldable part in 2605 tin solution for 2.50.5 seconds. | Tin area above 95% | |
| Soldering Resistance | Place connector on PCB, reflow at 2605 for 51S or wave solder. | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | |
| Mechanical Properties | |||
| Pin Fixing Force | Fix pin holder, apply force at 253mm/min until pin exits. | Single pin: 5N Min | |
| Terminal Retention in Plastic Parts | Pull terminal from socket at 253mm/min along conductor direction. | Single terminal: 7N Min | |
| Mechanical Life | Plug and unplug 30 times at 10 times/minute without power. | Contact Resistance: 80m Max | |
| Terminal Crimp Wire Strength | Axial pullout force at 253mm/min. | 26AWG: 17.8N. 28AWG: 8.9N. 30AWG: 4.4N. 32AWG: 2.2N. | |
| Insertion/Pullout Force | Fit socket and terminal, test insertion/removal on the same axis with lock removed (speed: 205mm/min). | Insertion Force: 2N (Per pin). Pullout Force: 0.3N (Per pin). | |
2410121633_JUSHUO-GH125-S16CCA-00_C2886794.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
