2.5mm Vertical Surface Mount Connector JUSHUO AFC25-S02CCA-00 Rated 250V 3A AC DC with Brass Pins and LCP Base
Manufacturer:
JUSHUO
Description:
Connector Header 2 position 2.5mm Pitch 3A Surface Mount,Vertical -20℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
5.95mm
Pins Structure:
1x2P
Reference Series:
XH
Contact Plating:
锡
Contact Material:
黄铜;LCP
Operating Temperature:
-20℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
2.5mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
2
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
7.5mm
Z-Height Of The Board:
7.9mm
Row Spacing:
-
Mounting Type:
立贴
Mfr. Part #:
AFC25-S02CCA-00
Package:
SMD,P=2.5mm
Model Number:
AFC25-S02CCA-00
Introduction
Product Overview
This product acknowledgement document details the specifications for the 2.5mm vertical surface mount connector, model AFC25-S**CCA-00. It outlines the product's technical characteristics, environmental performance, and mechanical properties to ensure customer confirmation and adherence to standards.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: China
- Material: Base: LCP E130i, Pin: Brass, Stator: Brass
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specifications | Requirements | Test Method |
| Standard Rating | |||
| Rated Voltage | 250V | ||
| Rated Current | 3.0A AC/DC | ||
| Operating Temperature Range | -25+105 | ||
| Operating Humidity Range | Relative humidity is below 90% | ||
| Packing | |||
| Inner Packing | Joint and several | ||
| Outer Packing | Carton, sealed, no shaking | ||
| Transport | |||
| Environment Temperature | -20 to +50 | ||
| Conditions | Avoid rain, snow, sunlight; no collision/extrusion | ||
| Storage | |||
| Environment Temperature | -20 to +50 | ||
| Relative Humidity | Not more than 90% | ||
| Atmosphere | No acid, alkaline, or corrosive gases | ||
| Part Name/Material | |||
| Base | 2.5 LCP E130i | ||
| Pin | 2.5 Brass | ||
| Stator | 2.5 Brass | ||
| Electrical Characteristics | |||
| Contact Resistance | 20m Max | Plug in connector, test with contact resistance meter. | |
| Insulation Resistance | 1000M Min | Apply 1000V DC between adjacent contacts and between contacts and enclosure for 1 min. | |
| Withstand Voltage | No breakdown and flashover | Apply 1000V AC between adjacent contacts and between contacts and enclosure for 1 min. | |
| Environmental Characteristics | |||
| Heating Test | Appearance: no damage; Contact Resistance: 30m Max | Place plug connector in +1052 for 96H, recover 1-2H. | |
| Cold Tolerance Test | Appearance: no damage; Contact Resistance: 30m Max | Place plug connector in -252 for 96H, recover 1-2H. | |
| Moisture Resistance Test | Appearance: no damage; Insulation Resistance: 500M Min; Withstand Voltage: 800V AC/min ute MIN | Place plug connector in 402, 90-96% RH for 96H, recover 1-2H. | |
| Temperature Cycle | Appearance: no abnormal; Contact Resistance: 30m Max | 5 cycles: -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H). Recover 2H. | |
| Salt Spray Test | Appearance: no damage/corrosion; Contact Resistance: 30m Max | Continuous spray with 51% NaCl solution for 24H. Wash with distilled water, recover 1-2H. | |
| Weldability | Tin area above 95% | Dip welded part in 2455 tin solution for 2.50.5 sec. | |
| Soldering Resistance | 1. Plastic parts: no obvious deformation/damage/blistering. 2. Electrical characteristics must meet specifications. | Place connector on PCB, reflow or wave solder at 2605 for 51S. | |
| Mechanical Properties | |||
| Pin Fixing Force | Single pin 12N Min | Fix pin holder, apply force at 253mm/min until pin withdraws. | |
| Terminal Retention in Plastic Parts | Single terminal: 15N Min | Pull terminal from socket at 253mm/min along conductor direction. | |
| Mechanical Life | Contact Resistance: 30m Max | Plug and unplug 50 times at 10 times/min under no power. | |
| Insertion/Pull-out Force | See table below | Fit socket and terminal on same axis, remove lock. Test speed: 205mm/min. | |
| Insertion/Pull-out Force (N) | |||||
| Position | Insert | Pull out | Position | Insert | Pull out |
| 1 | 16.00 | 2.00 | 9 | 48.00 | 24.00 |
| 2 | 20.00 | 10.00 | 10 | 52.00 | 26.00 |
| 3 | 24.00 | 12.00 | 11 | 56.00 | 28.00 |
| 4 | 28.00 | 14.00 | 12 | 60.00 | 30.00 |
| 5 | 32.00 | 16.00 | 13 | 64.00 | 32.00 |
| 6 | 36.00 | 18.00 | 14 | 68.00 | 34.00 |
| 7 | 40.00 | 20.00 | 15 | 72.00 | 36.00 |
| 8 | 44.00 | 22.00 | 16 | 76.00 | 38.00 |
2410121633_JUSHUO-AFC25-S02CCA-00_C2764256.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
