1.0mm pitch vertical SMT connector JUSHUO AFC10-S07PCA-00 with ROHS compliance and LCP base material
Manufacturer:
JUSHUO
Description:
Connector Header 7 position 1mm Pitch 500mA Surface Mount,Vertical -25℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
3.76mm
Pins Structure:
1x7P
Reference Series:
SH
Contact Plating:
锡
Contact Material:
磷青铜;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
7
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
9.3mm
Z-Height Of The Board:
4.4mm
Row Spacing:
-
Mounting Type:
立贴
Mfr. Part #:
AFC10-S07PCA-00
Package:
SMD,P=1mm
Model Number:
AFC10-S07PCA-00
Introduction
Product Overview
This product acknowledgment document pertains to the 1.0mm pitch vertical SMT connector, model AFC10-S**PCA-00. It outlines the product's specifications, performance requirements, and testing procedures to ensure customer confirmation and satisfaction. The connector is designed for applications requiring a 1.0mm pitch connection with vertical surface-mount capabilities.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: 1.0mm (1.0mm pitch vertical SMT connector)
- Product Model: AFC10-S**PCA-00
- Version: 1 1 version
- Environmental Protection: Products in line with ROHS environmental protection requirements.
- Material: Base: LCP E130i, Reed: Phosphor copper, Stator: Phosphor copper
- Origin: Shenzhen, China (implied by company address)
Technical Specifications
| Item | Specification | Test Method | Performance Requirement |
| Standard Rating | |||
| Rated Voltage | 50V | ||
| Rated Current | 0.5A AC/DC | ||
| Operating Temperature Range | -25+105 | ||
| Operating Humidity Range | Relative humidity is below 90% | ||
| Electrical Characteristics | |||
| Contact Resistance | Plug in the connector and test with a contact resistance meter. | 20m Max | |
| Insulation Resistance | Apply 500V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | 100M Min | |
| Withstand Voltage | Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover | |
| Environmental Characteristics | |||
| Heating Test | Place in +1052 for 96H, then recover. | Appearance: no damage; Contact resistance: 30m Max | |
| Cold Tolerance Test | Place in -252 for 96H, then recover. | Appearance: no damage; Contact resistance: 30m Max | |
| Moisture Resistance Test | Place in 402, 90-96% RH for 96H, then recover. | Appearance: no damage; Insulation resistance: 50M MIN; Withstand voltage: 200VAC/min | |
| Temperature Cycle | 5 cycles of -25 (30min) -> Room Temp (1H) -> +105 (30min) -> Room Temp (1H), then recover. | Appearance: no abnormality; Contact resistance: 30m Max | |
| Salt Spray Test | Continuous spray with 51% NaCl solution for 24H, then wash and recover. | Appearance: no damage or corrosion; Contact resistance: 30m Max | |
| Weldability | Dip in 2355 tin solution for 2.50.5 seconds. | Tin area above 95% | |
| Soldering Resistance | Reflow or wave soldering at 2605 for 51S. | Plastic parts: no obvious deformation/damage/blistering; Electrical characteristics must meet specifications. | |
| Mechanical Properties | |||
| Pin Fixing Force | Apply force at a rate of 253mm/min until pin withdraws. | Single pin: 7N Min | |
| Terminal Retention in Plastic Parts | Pull terminal out of socket at a rate of 253mm/min. | Single terminal: 5N Min | |
| Mechanical Life | Plug and unplug 50 times at 10 times/min (no power). | Contact resistance: 30m Max | |
| Insert/Pull Force | Test at 205mm/minute (hole seat lock removed). | See table for specific values per PIN position (Insert/Pull force in N). |
2410121633_JUSHUO-AFC10-S07PCA-00_C2764201.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
