Vertical SMT Connector 2.5mm Pitch JUSHUO AFC25-S05CCA-00 Rated 250V 3A Operating Temperature Range
Manufacturer:
JUSHUO
Description:
Connector Header 5 position 2.5mm Pitch 3A Surface Mount,Vertical -20℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
5.95mm
Reference Series:
XH
Pins Structure:
1x5P
Contact Plating:
锡
Contact Material:
黄铜;LCP
Operating Temperature:
-20℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
2.5mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
5
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
15mm
Z-Height Of The Board:
7.9mm
Row Spacing:
-
Mounting Type:
立贴
Mfr. Part #:
AFC25-S05CCA-00
Package:
SMD,P=2.5mm
Model Number:
AFC25-S05CCA-00
Introduction
Product Overview
This product acknowledgment document details the specifications for the 2.5mm Vertical SMT Connector, model AFC25-S**CCA-00. It outlines the product's technical characteristics, environmental performance, and mechanical properties, intended for confirmation by the customer. The connector is designed for applications requiring a 2.5mm pitch and is suitable for use within a specified temperature and humidity range.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: China
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specifications | Requirements |
| Standard Rating | ||
| Rated Voltage | 250V | |
| Rated Current | 3.0A AC/DC | |
| Operating Temperature Range | -25+105 | |
| Operating Humidity Range | Relative humidity is below 90% | |
| Packing & Transport & Storage | ||
| Packing | Inner packing: joint and several, outer packing: carton, sealed in the box, do not shake. | |
| Transport Environment Temperature | -20 to +50 | |
| Storage Environment Temperature | -20 to +50, relative humidity not more than 90%, no acid, alkaline and other corrosive gases. | |
| Part Name/Material | ||
| Base | 2.5 LCP E130i | |
| Pin | 2.5 Brass | |
| Stator | 2.5 Brass | |
| Electrical Characteristics | ||
| Contact Resistance | 20m Max | |
| Insulation Resistance | Apply 1000V DC for 1 minute between adjacent contacts and between contacts and enclosure. | 1000M Min |
| Withstand Voltage | Apply 1000V AC for 1 minute between adjacent contacts and between contacts and enclosure. | No breakdown and flashover |
| Environmental Characteristics | ||
| Heating Test (+105, 96H) | Appearance: no damage. Contact Resistance: 30m Max | |
| Cold Tolerance Test (-25, 96H) | Appearance: no damage. Contact Resistance: 30m Max | |
| Moisture Resistance Test (40, 90-96% RH, 96H) | Appearance: no damage. Insulation Resistance: 500M Min. Withstand Voltage: 800V AC/minute MIN | |
| Temperature Cycle (-25 to +105, 5 cycles) | Appearance: no abnormality. Contact Resistance: 30m Max | |
| Salt Spray Test (24H) | Appearance: no damage or corrosion. Contact Resistance: 30m Max | |
| Weldability | Dip in 2455 tin solution for 2.50.5 seconds. | Tin area above 95% |
| Soldering Resistance (2605 reflow/wave soldering 51S) | 1. Plastic parts shall be free from obvious deformation, damage and blistering. 2. Electrical characteristics must meet specifications. | |
| Mechanical Properties | ||
| Pin Fixing Force | Rate: 253mm/min | Single pin 12N Min |
| Terminal Retention in Plastic Parts | Rate: 253mm/min along conductor direction. | Single terminal: 15N Min |
| Mechanical Life | Plug and unplug 50 times at 10 times/min. | Contact Resistance: 30m Max |
| Insertion/Extraction Force (Rate: 205mm/min) | See table below for specific values per position. | |
| Insertion/Extraction Force (N) | |||||
| Position | Insert | Pull Out | Position | Insert | Pull Out |
| 1 | 16.00 | 2.00 | 9 | 48.00 | 24.00 |
| 2 | 20.00 | 10.00 | 10 | 52.00 | 26.00 |
| 3 | 24.00 | 12.00 | 11 | 56.00 | 28.00 |
| 4 | 28.00 | 14.00 | 12 | 60.00 | 30.00 |
| 5 | 32.00 | 16.00 | 13 | 64.00 | 32.00 |
| 6 | 36.00 | 18.00 | 14 | 68.00 | 34.00 |
| 7 | 40.00 | 20.00 | 15 | 72.00 | 36.00 |
| 8 | 44.00 | 22.00 | 16 | 76.00 | 38.00 |
2410121633_JUSHUO-AFC25-S05CCA-00_C2764259.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
