Durable vertical SMT connector 2.0mm pitch JUSHUO AFC20-S06BCA-00 suitable for electrical connections
Manufacturer:
JUSHUO
Description:
Connector Header 6 position 2mm Pitch 2A Surface Mount,Vertical -20℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
7.55mm
Reference Series:
PH
Pins Structure:
1x6P
Contact Plating:
锡
Contact Material:
黄铜;LCP
Operating Temperature:
-20℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
2mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
6
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
15.9mm
Z-Height Of The Board:
5.55mm
Row Spacing:
-
Mounting Type:
立贴
Mfr. Part #:
AFC20-S06BCA-00
Package:
SMD,P=2mm
Model Number:
AFC20-S06BCA-00
Introduction
Product Overview
This product acknowledgment document pertains to the 2.0mm pitch vertical SMT connector, model AFC20-S**BCA-00. It outlines the product's specifications, performance requirements, and testing procedures to ensure compliance and quality. The connector is designed for applications requiring reliable electrical connections with specific mechanical and environmental characteristics.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: 2.0mm (2.0mm Vertical SMT Connector)
- Material Number: AFC20-S**BCA-00
- Origin: Shenzhen, China
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specification | Test Method | Performance Requirement |
|---|---|---|---|
| Standard Rating | |||
| Rated Voltage | 250V AC/DC | ||
| Rated Current | 2.0A | ||
| Operating Temperature Range | -25+105 | ||
| Operating Humidity Range | Relative humidity is below 90% | ||
| Part Name/Material | |||
| Base | 2.0 LCP E130i | ||
| Pin | 2.0 Brass | ||
| Stator | 2.0 Brass | ||
| Electrical Characteristics | |||
| Contact Resistance | 20m Max | Plug in connector, test with contact resistance meter. | |
| Insulation Resistance | 1000M Min | Apply 1000V DC between adjacent contacts and between contacts and enclosure for 1 minute. | |
| Withstand Voltage | N/A | Apply 1000V AC between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover |
| Environmental Characteristics | |||
| Heating Test | Appearance: no damage. Contact Resistance: 30m Max | Place plugged connector in +1052 environment for 96H, then test after 1-2H recovery. | |
| Cold Tolerance Test | Appearance: no damage. Contact Resistance: 30m Max | Place plugged connector in -252 environment for 96H, then test after 1-2H recovery. | |
| Moisture Resistance Test | Appearance: no damage. Insulation Resistance: 500M Min. Withstand Voltage: 600V AC/min MIN. | Place plugged connector in 402, 90-96% RH environment for 96H, then test after 1-2H recovery. | |
| Temperature Cycle | Appearance: no abnormality. Contact Resistance: 30m Max | 5 cycles of -253 (30min), room temp (1H), +1053 (30min), room temp (1H), with 2H recovery. | |
| Salt Spray Test | Appearance: no damage or corrosion. Contact Resistance: 30m Max | Continuous spray with 51% NaCl solution for 24H, wash with distilled water, recover 1-2H. | |
| Weldability | Tin area above 95% | Dip in 2455 tin solution for 2.50.5 seconds. | |
| Soldering Resistance | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. | Reflow solder at 2605 for 51S or wave solder. | |
| Mechanical Properties | |||
| Pin Fixing Force | Single pin 10N Min | Apply force at pin front end at 253mm/min until pin withdraws. | |
| Terminal Retention in Plastic Parts | Single terminal: 7N Min | Pull terminal from socket at 253mm/min along conductor direction. | |
| Mechanical Life | Contact Resistance: 30m Max | Plug and unplug 50 times at 10 times/min without power. | |
| Insertion/Extraction Force | See table below | Fit socket and terminal, insert/extract on same axis (remove lock). Test speed: 205mm/min. | |
| Position | Insertion (N) | Extraction (N) | |
| 1 | 4.00 | 1.50 | |
| 2 | 24.00 | 6.00 | |
| 3 | 28.00 | 7.50 | |
| 4 | 32.00 | 9.00 | |
| 5 | 36.00 | 10.50 | |
| 6 | 40.00 | 12.00 | |
| 7 | 44.00 | 13.50 | |
| 8 | 48.00 | 15.00 | |
| 9 | 52.00 | 16.50 | |
| 10 | 56.00 | 18.00 | |
| 11 | 60.00 | 19.50 | |
| 12 | 64.00 | 21.00 | |
| 13 | 68.00 | 22.50 | |
| 14 | 72.00 | 24.00 | |
| 15 | 76.00 | 25.50 | |
| 16 | 80.00 | 27.00 | |
2410121633_JUSHUO-AFC20-S06BCA-00_C2764230.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
