Vertical SMT connector model JUSHUO AFC10-S10PCA-00 1.0mm pitch rated voltage 50V current 0.5A AC DC
Manufacturer:
JUSHUO
Description:
Connector Header 10 position 1mm Pitch 500mA Surface Mount,Vertical -25℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
3.76mm
Pins Structure:
1x10P
Reference Series:
SH
Contact Plating:
锡
Contact Material:
磷青铜;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
10
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
12.3mm
Z-Height Of The Board:
4.4mm
Row Spacing:
-
Mounting Type:
立贴
Mfr. Part #:
AFC10-S10PCA-00
Package:
SMD,P=1mm
Model Number:
AFC10-S10PCA-00
Introduction
Product Overview
This product acknowledgment document details the 1.0mm pitch vertical SMT connector, model AFC10-S**PCA-00, manufactured by SHENZHEN JUSHUO ELECTRONIC CO.,LTD. It outlines the product's specifications, testing procedures, and performance requirements, ensuring compliance with industry standards and customer confirmation.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Product Name: 1.0mm pitch vertical SMT connector
- Product Model: AFC10-S**PCA-00
- Version: 1 1 version
- Certifications: ROHS environmental protection requirements
- Origin: Shenzhen, China
Technical Specifications
| Item | Specifications | Test Method | Performance Requirement |
|---|---|---|---|
| 2. Standard Rating | |||
| Rated Voltage | 50V | ||
| Rated Current | 0.5A AC/DC | ||
| Operating Temperature Range | -25+105 | ||
| Operating Humidity Range | Relative humidity is below 90% | ||
| 7. Part Name/Material | |||
| Part Name | Model | Material | |
| Base | 1.0 LCP E130i | ||
| Reed | 1.0 | Phosphor copper | |
| Stator | 1.0 | Phosphor copper | |
| 9. Electrical Characteristics | |||
| Contact Resistance | Plug in the connector and test with a contact resistance meter. | 20m Max | |
| Insulation Resistance | Apply 500V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | 100M Min | |
| Withstand Voltage | Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover | |
| 10. Environmental Characteristics | |||
| Heating Test | Place in +1052 for 96H. | Appearance: No damage. Contact Resistance: 30m Max | |
| Cold Tolerance Test | Place in -252 for 96H. | Appearance: No damage. Contact Resistance: 30m Max | |
| Moisture Resistance Test | Place in 402, 90-96% RH for 96H. | Appearance: No damage. Insulation Resistance: 50M MIN. Withstand Voltage: 200VAC/min | |
| Temperature Cycle | 5 cycles of -253 (30min), Room Temp (1H), +1053 (30min), Room Temp (1H). | Appearance: No abnormalities. Contact Resistance: 30m Max | |
| Salt Spray Test | Continuous spray with 51% NaCl solution for 24H. | Appearance: No damage or corrosion. Contact Resistance: 30m Max | |
| Weldability | Dip in 2355 tin solution for 2.50.5 seconds. | Tin area above 95% | |
| Soldering Resistance | Reflow solder at 2605 for 51s or wave solder. | Plastic parts: No obvious deformation, damage, or blistering. Electrical characteristics must meet specifications. | |
| 11. Mechanical Properties | |||
| PIN Fixing Force | Apply force at 253mm/min until pin withdraws. | Single PIN: 7N Min | |
| Terminal Retention in Plastic Parts | Pull terminal from socket at 253mm/min along wire direction. | Single terminal: 5N Min | |
| Mechanical Life | Plug and unplug 50 times at 10 times/min without power. | Contact Resistance: 30m Max | |
| Insert Force/Draw Force | Test at 205mm/minute. | See table for PIN count specific values. | |
Insert/Draw Force Table:
| PIN | Insert (N) | Pull Out (N) | PIN | Insert (N) | Pull Out (N) |
|---|---|---|---|---|---|
| 1 | 3.00 | 0.50 | 9 | 29.00 | 5.50 |
| 2 | 8.00 | 2.00 | 10 | 32.00 | 6.00 |
| 3 | 11.00 | 2.50 | 11 | 35.00 | 6.50 |
| 4 | 14.00 | 3.00 | 12 | 38.00 | 7.00 |
| 5 | 17.00 | 3.50 | 13 | 41.00 | 7.50 |
| 6 | 20.00 | 4.00 | 14 | 44.00 | 8.00 |
| 7 | 23.00 | 4.50 | 15 | 47.00 | 8.50 |
| 8 | 26.00 | 5.00 | 16 | 50.00 | 9.00 |
2410121633_JUSHUO-AFC10-S10PCA-00_C2764204.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
