Horizontal SMT Connector 2.5mm Pitch JUSHUO AFC25-S08DCA-00 with 250V AC DC Voltage Rating
Manufacturer:
JUSHUO
Description:
Connector Header 8 position 2.5mm Pitch 3A Surface Mount, Right Angle -20℃~+85℃
Category:
Headers, Male Pins/Headers, Male Pins
Specifications
Y-Width Of Bottom Edge On Board:
8.3mm
Reference Series:
XH
Pins Structure:
1x8P
Contact Plating:
锡
Contact Material:
黄铜;LCP
Operating Temperature:
-20℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
2.5mm
Voltage Rating (Max):
250V
Number Of PINs Per Row:
8
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
22.5mm
Z-Height Of The Board:
6.11mm
Mounting Type:
卧贴
Row Spacing:
-
Mfr. Part #:
AFC25-S08DCA-00
Package:
SMD,P=2.5mm,Surface Mount,Right Angle
Model Number:
AFC25-S08DCA-00
Introduction
Product Overview
This product acknowledgment document pertains to the AFC25-S**DCA-00, a 2.5mm pitch horizontal SMT connector. It details the product's specifications, electrical and mechanical characteristics, environmental requirements, and testing procedures. This document is intended for customer confirmation and approval.
Product Attributes
- Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
- Origin: China
- Certifications: ROHS environmental protection requirements
Technical Specifications
| Item | Specification | Details |
| Product Name | 2.5mm | AFC25-S**DCA-00 |
| Version | 1 | Page 1 of 6 |
| Scope of Application | A1251 series products | |
| Standard Rating | Rated Voltage | 250V AC/DC |
| Rated Current | 3.0A | |
| Operating Temperature Range | -25+105 | |
| Operating Humidity Range | Relative humidity is below 90% | |
| Packing | Inner packing:, Outer packing: | Product sealed in box, no shaking |
| Transport Environment Temperature | -20 to +50 | Avoid rain, snow, sunlight; no collision or extrusion |
| Storage Environment | Temperature: -20+50, Relative humidity: 90% | Warehouse without acid, alkaline, or corrosive gases |
| Part Name/Material | Base | 2.5 LCP E130i |
| Pin | 2.5 Brass | |
| Stator | 2.5 Brass | |
| Appearance | Plastic parts: no obvious scars, mottled, cracks, burrs, flash, material shortage, or deformation. Metal parts: smooth, no rust, oxidation, peeling, blackening, or mechanical damage. | |
| Electrical Characteristics: Contact Resistance | Test Method | Connector plugged in, tested with contact resistance meter. |
| Performance Requirement | 20m Max | |
| Electrical Characteristics: Insulation Resistance | Test Method | Connector plugged in, 1000V DC applied between adjacent contacts and between contacts and enclosure for 1 minute. |
| Performance Requirement | 1000M Min | |
| Electrical Characteristics: Withstand Voltage | Test Method | Connector plugged in, 1000V AC applied between adjacent contacts and between contacts and enclosure for 1 minute. |
| Performance Requirement | No breakdown and flashover | |
| Environmental Characteristics: Heating Test | Test Method | Plugged connector in +1052 for 96H, recover 1-2H. |
| Performance Requirement | Appearance: no damage; Contact Resistance: 30m Max | |
| Environmental Characteristics: Cold Tolerance Test | Test Method | Plugged connector in -252 for 96H, recover 1-2H. |
| Performance Requirement | Appearance: no damage; Contact Resistance: 30m Max | |
| Environmental Characteristics: Moisture Resistance Test | Test Method | Plugged connector in 402, 90-96% RH for 96H, recover 1-2H. |
| Performance Requirement | Appearance: no damage; Insulation Resistance: 500M Min; Withstand Voltage: 800V AC/min ute MIN | |
| Environmental Characteristics: Temperature Cycle | Test Method | 5 cycles: -253 (30min) -> Room Temp (1H) -> +1053 (30min) -> Room Temp (1H). Recover 2H. |
| Performance Requirement | Appearance: no abnormality; Contact Resistance: 30m Max | |
| Environmental Characteristics: Salt Spray Test | Test Method | (51)% NaCl solution, continuous spray 24H. Wash with distilled water, recover 1-2H. |
| Performance Requirement | Appearance: no damage/corrosion; Contact Resistance: 30m Max | |
| Environmental Characteristics: Weldability | Test Method | Dip in 2455 tin solution for 2.50.5 seconds. |
| Performance Requirement | Tin area 95% | |
| Environmental Characteristics: Soldering Resistance | Test Method | Place on PCB, reflow at 2605 for 51S or wave soldering. |
| Performance Requirement | 1. No obvious deformation, damage, blistering of plastic parts. 2. Electrical characteristics must meet specifications. | |
| Mechanical Properties: PIN Fixing Force | Test Method | Fix pin holder, apply force at 253mm/min until pin withdraws. |
| Performance Requirement | Single pin: 12N Min | |
| Mechanical Properties: Terminal Retention in Plastic Parts | Test Method | Terminal and socket fit, pull terminal from socket at 253mm/min along wire direction. |
| Performance Requirement | Single terminal: 15N Min | |
| Mechanical Properties: Mechanical Life | Test Method | Plug and unplug 50 times at 10 times/min without power. |
| Performance Requirement | Contact Resistance: 30m Max | |
| Mechanical Properties: Insertion/Pull-out Force | Test Method | (1) Fit socket and terminal, test insertion/removal on same axis as pin seat. Remove socket lock. Speed: 205mm/min. |
| Performance Requirement | See table in source document for detailed values per pin position. |
2410121633_JUSHUO-AFC25-S08DCA-00_C2764247.pdf
Related Products
Durable Electrical Connector JUSHUO AFC10-S06PCC-00 Featuring PCB Layout for Electronic Applications
Connector Header 6 position 1mm Pitch
Industrial electronic connector JUSHUO AFC20-S04ACC-00 part of XFC series designed for connectivity
Connector Header 4 position 2mm Pitch
Durable electronic 1.0mm pitch horizontal SMT connector JUSHUO AFC10-S02QCA-00 with ROHS compliance
Connector Header 2 position 1mm Pitch 500mA Surface Mount, Right Angle -25℃~+85℃
1.5mm Pitch Horizontal SMT Connector JUSHUO AFC15-S08DCA-00 Electronic Component for Circuit Boards
Connector Header 8 position 1.5mm Pitch 1A Surface Mount, Right Angle -20℃~+85℃
Complete PCB Layout Design and Documentation Including JUSHUO AFC10-S05PCC-00 Model for Circuit Board
Connector Header 5 position 1mm Pitch
Electronic 2.0mm Horizontal SMT Socket Connector with Latch JUSHUO GH200-S05ACA-00 Solution
Connector Header 5 position 2mm Pitch 2A Surface Mount, Right Angle -25℃~+85℃
Compact and versatile JUSHUO AFC10-S11QCC-00 connector unit optimized for electronic device assembly
Connector Header 11 position 1mm Pitch
Precision engineered JUSHUO AFC12-S16DCC-00 connector suitable for demanding electronic environments
Connector Header 16 position 1.25mm Pitch
Wafer patch socket connector 125mm pitch JUSHUO 1.25T-8PWT ideal for FPC FFC mating and connection
Connector Header 8 position 1.25mm Pitch
connection solution JUSHUO AFC20-S10ACC-00 connector for electronic and industrial automation equipment
Connector Header 10 position 2mm Pitch
Send RFQ
Stock:
MOQ:
